Digital Dispensary

Product Sections


Best Sellers

Grommet - Brake Pipe Support

Grommet - Brake Pipe Support

0.31

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Grommet to support brake pipe on rear axle casing. Used with clip 56666.
Approximate dimensions: overall length 21.5mm(0.85"), inside diameter 7mm(0.3"), outside diameter 14.5mm(0.6")
find out more

Clip for brake pipe grommet

Clip for brake pipe grommet

0.61

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Clip for brake pipe support grommet 6860L. Used on rear axle casing on all Series models from 1954 to 1984.
Approximate dimensions: 11mm(7/16") wide, 34mm(1.3") long, mounting hole 5mm(0.2") diameter, internal diameter of clip when closed 13mm.
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Gasket Set for Series Gearboxes

Gasket Set for Series Gearboxes

4.20

Application: Series 1, Series 2 & 3 with 4 or 6 cylinder engines.
Description: Set of replacement gaskets for main and transfer gearboxes. Does NOT include seals.
find out more

Water Pump Series1 Petrol

Water Pump Series1 Petrol

51.00

Application: Series 1 1.6ltr & 2.0ltr petrol (gasolene) engines.

Description: Reproduction cast iron water pump, supplied with gaskets.
find out more

Gaiter for High/Low Gear Lever

Gaiter for High/Low Gear Lever

2.46

Application: Series 1, Series 2/2A and Series 3.

Description: Reproduction rubber gaiter for the high/low gear lever.

Approximate dimensions: Overall length 143mm, height 90mm.

find out more

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

13.70

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Copper Ring Water Pump to Thermostat Housing

Copper Ring Water Pump to Thermostat Housing

7.44

Application: Series One with 1.6 or 2 litre petrol engine. Series Two with 2 litre petrol engine.
Description: Copper ring to support 'O' ring between water pump and thermostat housing.
Approximate dimensions: outside diameter 16mm(0.63"), inside diameter 11mm(0.43"), height 7.5mm(0.3")
find out more

Wheel Stud for Series 1

Wheel Stud for Series 1

5.82

Application: All Series One models.

Description: Reproduction wheel stud for Series 1. Threaded 9/16"BSF. Use with nut 217361.

Approximate dimensions: Overall length 52mm(2"), short threaded end 12mm(0.47"), long threaded end 27.5mm(1.08"), land 12.5mm(0.5")

find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > LAND Rover Series One Parts > Land Rover Series One Axles and Transmission Parts
Page:   <<   <  1  2  3  4  5  ...   >   >>
Hub Carrier for Rear Axle Ref: 8276
Application: Series 1 with semi-floating rear axle.

Description: Reproduction rear hub carrier.

Approximate dimensions: Outside diameter 141mm(5.6"), 64.8mm(2.6") long

Price: 155.00 (186.00 Including VAT at 20%)



Hub Carrier for Rear Axle
Hub Bearing Rear Ref: 270604
Application: Series 1 with the semi-floating rear axle , that is most of them.
Description: Replacement rear hub bearing. This is the one that is a swine to change. Bearing number 88128R, with shields on both sides.
Approximate dimensions: outside diameter 80mm (3.15"), inside diameter 39mm (1.54"), thickness of outer race 21mm (0.83"), thickness of inner race 27.4mm (1.08").

Price: 67.55 (81.06 Including VAT at 20%)




People who bought this item also bought:
1. Rear Hub Oil Seal (Ref: 236923)
2. Wheel Stud for Series 1 (Ref: 217360)
3. Diff Pinion Bearing, Inner (Ref: 219544)
Hub Bearing Rear
Retainer for Rear Hub Bearing Ref: 7297L
Application: Series 1 with semi-floating rear half shafts.

Description: Reproduction retaining collar for rear hub bearings.

Approximate dimensions: Outside diameter 47.8mm(1.9"), inside diameter 39.9mm(1.6"), length 38mm(1.5")

Back in stock

Price: 6.00 (7.20 Including VAT at 20%)




People who bought this item also bought:
1. Oil Seal Differential Pinion (Ref: FRC4586)
2. Gasket Swivel Housing to Axle Tube (Ref: 232413)
Retainer for Rear Hub Bearing
Sleeve for Oil Seal Ref: 7295
Application: Series 1 models with semi-floating rear half shafts.

Description: reporduction sleeve for rear hub oil seal.

Approximate dimensions: Outside diameter 80mm(3.15"), inside diameter 70mm(2.76") except for ridge which is 66.5mm(2.62"), length 25.5mm(1").

Price: 89.13 (106.96 Including VAT at 20%)



Sleeve for Oil Seal
Rear Hub Oil Seal Ref: 236923
Application: Series 1 with semi-floating rear axle.
Description: Replacement rear hub oil seal.
Approximate dimensions: outside diameter 70mm (2.76"), thickness 12mm (0.47").

Price: 3.25 (3.90 Including VAT at 20%)




People who bought this item also bought:
1. Wheel Stud for Series 1 (Ref: 217360)
2. Oil Seal Differential Pinion (Ref: FRC4586)
3. Gasket for Differential to Axle Casing (Ref: 7316)
Rear Hub Oil Seal
Series1, 2 & 3 Wheel Bearing Kit with Japanese Bearings Ref: WHEELBRGKIT01N
Application: Series 1 front axle only, Series 2, Series 2A and Series 3 to 1980. Where inner bearing is larger than outer bearing. Covers both long and short wheel base vehicles, suitable for either front or rear wheel.

Description: Kit of parts to service one wheel hub. Kit comprises inner and outer Japanese manufactured wheel bearings (NTN or similar brand), Gaco inner seal, flange gasket, hub nut locker, felt outer seal, 'o' ring outer seal and split pin.

Price: 33.28 (39.94 Including VAT at 20%)



Series1,  2 & 3 Wheel Bearing Kit with Japanese Bearings
Land on Stub Axle for Hub Seal Ref: 599698
Application: Series 1 front axle, Series 2 and Series 3 upto 1980.
Description: Replaceable land or spacer on stub axle that the wheel hub seal runs on.
Approximate dimensions: outside diameter 2 5/8"(55.8mm), inside diameter 1 13/16" (46mm), depth 7/16"(11mm).
Original part number: 217351

Price: 7.98 (9.58 Including VAT at 20%)




People who bought this item also bought:
1. Felt Seal Stub Shaft to Drive Flange (Ref: RTC3515)
2. Locker for Stub Axle (Ref: 277311D)
Land on Stub Axle for Hub Seal
Wheel Stud for Series 1 Ref: 217360
Application: All Series One models.

Description: Reproduction wheel stud for Series 1. Threaded 9/16"BSF. Use with nut 217361.

Approximate dimensions: Overall length 52mm(2"), short threaded end 12mm(0.47"), long threaded end 27.5mm(1.08"), land 12.5mm(0.5")

Price: 4.85 (5.82 Including VAT at 20%)




People who bought this item also bought:
1. Washer for Drain Plug (Ref: 515599)
2. Wheel Nut (Ref: 217361)
3. Shim for Outer Bearing of Diff Pinion, 0.010" (Ref: 219549)
Wheel Stud for Series 1
Wheel Nut Ref: 217361
Application: Series 1 and Series 2.
Description: Wheel retaining nut with double chamfer. Thread is 9/16" BSF. Nut is 1" (25.4mm) long by 59/64" (23.4mm) across flats.

Price: 0.65 (0.78 Including VAT at 20%)




People who bought this item also bought:
1. Wheel Stud for Series 1 (Ref: 217360)
2. Oil Seal Differential Pinion (Ref: FRC4586)
3. Shim for Outer Bearing of Diff Pinion, 0.010" (Ref: 219549)
Wheel Nut
Retaining Collar Half-Shaft Bearing Ref: 90217398D
Application: Series 1, 2 & 3 front axle.
Description: Replacement retaining collar for inner race of bearing for front half shafts.
Approximate dimensions: outside diameter 44.4mm(1.75"), inside diameter 34.8mm (1.25"), length 25mm (1.0")
Original part number: 217398

Price: 9.24 (11.09 Including VAT at 20%)




People who bought this item also bought:
1. Felt Seal Stub Shaft to Drive Flange (Ref: RTC3515)
2. Replacement Universal Joint Kit (Ref: RTC3291=)
3. Steering Ball Joint, Right Hand Thread (Ref: 608464D)
Retaining Collar Half-Shaft Bearing
Digital Dispensary > LAND Rover Series One Parts > Land Rover Series One Axles and Transmission Parts
Page:   <<   <  1  2  3  4  5  ...   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Steering Arm - Series 1

Steering Arm - Series 1

17.82

Application: Series 1 models 1948 to 1956 approx.

Description: Drop arm for early type steering box. This arm is held in place with a pinch bolt.

Approximate dimensions: Overall length 17.4cm(6.9")

find out more

'D' Washer - Pedal Shaft

'D' Washer - Pedal Shaft

0.96

Application: Series 1 models.

Description: 'D' washer for support shaft for brake and clutch pedals.

Approximate dimensions: Outside diameter 38mm(1.5"), thickness 3mm(1/8").


find out more

Fixing Kit for Manifolds - Metric

Fixing Kit for Manifolds - Metric

12.83

Application: Series 3 from 1980 with 2.25 litre petrol engine.

Description: Metric threaded kit of fixings to hold manifolds to cylinder head. Kit includes 6 bolts, 2 set screws, 3 studs, 9 plain washers, 11 lock washers, 3 nuts, 2 clamps and 2 lockers

find out more

Fixing Kit for Manifolds - Imperial

Fixing Kit for Manifolds - Imperial

10.20

Application: Series 2 and Series 3 to approx 1980 with 2.25 litre petrol engine.

Description: Imperial (inch) threaded kit of fixings to hold manifolds to cylinder head. Kit includes 6 bolts, 2 set screws, 3 studs, 9 plain washers, 11 lock washers, 3 nuts, 2 clamps and 2 lockers

find out more

Shackle Plate Rear

Shackle Plate Rear

11.16

Application: Series1 1948 to 1953.

Description: Shackle plate for rear springs with plain 9/16" diameter holes.

Approximate dimensions: Length 113mm(4.45"), width 38mm(1.5"), thickness 9.2mm(0.36")
find out more

Shackle Plate Rear

Shackle Plate Rear

13.02

Application: Series 1 1948 to 1953.

Description: Shackle plate for rear springs with 1/2"BSF threaded holes.

Approximate dimensions: Length 113mm(4.45"), width 38mm(1.5"), thickness 9.2mm(0.36")

find out more

Clip for 3/16" Brake Pipe

Clip for 3/16

1.39

Application: Series1, Series2/2A and Series3 models.

Description: Reproduction stainless steel clip for brake pipes. Intended for 3/16" pipe, but will work with 1/4" diameter pipe also.

Approximate dimensions: Length 20mm(0.8"), width 10mm(3/8"), height 5mm(0.2"), hole diameter 4mm(0.16").

find out more

Rear End-plate for Cylinder Head

Rear End-plate for Cylinder Head

97.66

Application: Series 1 petrol models 1948 to 1958, Series 2 models with 2 litre petrol engine.

Description: Reproduction end plate in cast aluminium with mounting aperature for thermo switch.

Approximate dimensions: Length 91mm(3.6"), height 84mm(3.3"), depth 18.4mm(0.72")

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -