Digital Dispensary

Product Sections


Best Sellers

Injector Remover TD5

Injector Remover TD5

117.79

Application: TD5 diesel engine as fitted to Defender and Discovery2.
Description: Slide hammer type remover for injectors

find out more

Seal Kit for Brake Master Cylinder

Seal Kit for Brake Master Cylinder

19.80

Application: Series One from 1948 to 1958.
Description: Reproduction seal kit for brake master cylinder. Suits all short wheel base models. Not suitable for long wheel base models.
Original part number 278524
find out more

Anchor Plate for 10inch brake shoes

Anchor Plate for 10inch brake shoes

8.44

Anchor plate for use with 10inch brakes - see kit above. One anchor plate is used with each pair of shoes. These do not need replacing with every change of brake shoes, but they do become worn over several years use. Sold singly.
Approximate dimensions: 78mm x 45mm x 5mm.

Application: see STC2796DKIT above.
find out more

Felt Seal Stub Shaft to Drive Flange

Felt Seal Stub Shaft to Drive Flange

0.48

Application: Series 1 front axles, Series 2 front and rear axles, Series 3 SWB front and rear axles.
Description: Felt seal for 10 spline axle shafts to outer drive flanges.
Original part number 272086
find out more

Inner Wheel Hub Seal

Inner Wheel Hub Seal

4.28

Application: Series 1 front axles, Series 2 & Series 3 to 1980.
Description: Inner hub oil seal made by Corteco/Gaco.
Approximate dimensions: outside diameter 85mm (3.35"), thickness 7.8mm (0.3").
Original part number 239422.

find out more

Grommet Series 1 Pedals

Grommet Series 1 Pedals

10.80

Application: Series 1 brake and clutch pedals.
Description: Reproduction rubber grommet for brake pedal shaft to floor panel. Use with 70621 felt seal.
find out more

Split Pin - Shocker Retention

Split Pin - Shocker Retention

0.25

Application: Series 1, Series 2 and Series 3.

Description: Replacement split pin for retaining shock absorber to bottom plate of spring.

Approximate dimensions: Overall length 55.5mm(2.2"), diameter 6mm(0.24")

find out more

Dust Cap for Bleed Screw

Dust Cap for Bleed Screw

0.30

Application: Suitable for all bleed screws.
Description: Soft plastic dust cap for bleed screws.
Approximate dimensions: length 15mm(0.6"), diameter 8mm (0.3")
Original part number 234957
find out more

Screw for retaining Brake Drums

Screw for retaining Brake Drums

0.25

Application: Series 1, 2 & 3.
Description: Countersunk head screw 3/8"BSW by 5/8" long.
find out more

These Superb Prices are ONLY available when you order ON-LINE

Dingocroft Contact Details

To the business in general:

Telephone: 01494 448367 from abroad +44 1494 448367

Fax: 01494 459964 and from abroad +44 1494 459964

Please note telephone calls may be recorded. We now have the facility to record calls, this is useful for double checking that we have noted address and order details correctly. We will not hold any financial information (e.g. credit card details) with this system.

Email: info@dingocroft.co.uk

Mail: Dingocroft, High Street, Downley, High Wycombe,
Buckinghamshire HP13 5XJ  United Kingdom

For specific members of staff

Tim Britnell - Managing Director 

direct dial: 01494 796001
email: tim@dingocroft.co.uk

Obviously the buck stops here! But generally my responsibilities are purchasing policy,
export sales, internet sales and webmaster.

Chris Hopkins - Sales Executive

direct dial: 01494 796004
email: chris@dingocroft.co.uk

Chris is a Land Rover fanatic and drives a Defender 90 Station Wagon in Bonatti Grey. He is also involved with our mail order and export sales.

Chris Cox - Sales Executive

direct dial: 01494 796005
email: chriscox@dingocroft.co.uk

Chris is another Land Rover fanatic and drives a Series 3 88" with 2.25 litre petrol engine. At home he has a "Piglet" which served in Northern Ireland. He is also involved with our mail order and counter sales.

Henry Swanborough - Sales Executive

direct dial: 01494 796003
email: henrys@dingocroft.co.uk

Henry is also Land Rover fanatic and drives a Discovery 2 TD5. He is also involved with our mail order and counter sales.

Peter Newcombe - Senior Sales Executive

direct dial: 01494 796002
email: peter@dingocroft.co.uk

Peter looks after telephone sales. Particularly bodyshops and fleet customers. Please note that Peter is now working reduced hours. In his absence please contact Tim, Chris, Chris or Henry.

Accounts Department - sales and purchase

direct dial: 01494 796000  email: accounts@dingocroft.co.uk

Debbie and Dawn look after the accounts. So please contact them for copy invoices, statement queries, etc

Contact Form

We welcome your requests for information and quotations for Land Rover parts, spares and
accessories. We also welcome comments and suggestions about our website and webshops.
We will respond as soon as possible, but it can take a few days at busy times.

DO NOT send your credit card details via this form. Either fax them to +44 1494 459964 or
telephone them to us +44 1494 448367.

How can we help you?

Enter your comments or requirements in the space provided below:

If you require a quotation, are making a parts enquiry or placing an order please provide
the following information:

Model:

Chassis or VIN number:

Left hand drive or right hand drive?:

Engine fitted:

Engine serial number:

Tell us how to get in touch with you:

Name     
E-mail
Tel
Where in the world are you?
Please enter town/city & country


Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Piston Assembly 2.4TDCI

Piston Assembly 2.4TDCI

122.63

Application: Defender from 2007 to 2012 with 2.4 litre TDCI engine.

Description: Standard size piston for 89.90mm bore. Supplied with rings, gudgeon pin and circlips. Made by Nural a Federal Mogul company.



find out more

Electric Fuel Pump - Series 1

Electric Fuel Pump - Series 1

100.44

Application: Series 1 Land Rovers 1948 to 1958. Series 2 with 2 litre petrol engine.

Description: Authentic SU electric fuel pump to original pattern. For mounting in engine bay. Can be used on either positive or negative earth vehicles. NB Both outlet and inlet have threaded connectors.

Approximate dimensions: 14cm long, base diameter 73mm. Mounting holes in base are threaded M6

find out more

Repair Kit for Handbrake Adjuster

Repair Kit for Handbrake Adjuster

4.45

Application: Series 2A and Series 3.

Description: Old stock Lucas Girling repair kit for handbrake adjuster. Includes adjusting screw and wedges plus period tube of brake grease.


find out more

Injector for BMW M57 Diesel Engine

Injector for BMW M57 Diesel Engine

183.77

Application: Range Rover L322 with BMW M57 3.0litre diesel engine.

Description: Reconditioned Bosch injector for the M57 engine. Outright purchase, we do not need your old injector in vexchange.

Approximate dimensions: Overall length 22cm(8.7").

find out more

Bearing and Seals kit for Freelander 1 IRD

Bearing and Seals kit for Freelander 1 IRD

72.54

Application: Freelander 1 IRD unit except V6 model.

Description: Set of 7 OE spec bearings and 4 seals to overhaul the intermediate reduction drive unit. This kit does not include the plate for the oil cooler.

find out more

Rear Diff Repair Kit - Freelander2

Rear Diff Repair Kit - Freelander2

103.14

Application: Freelander 2 and Evoque

Description: Repair kit of OE bearings and seals for the rear differential. Kit includes 4x taper roller bearings, 3x oil seals, 2x 'O' rings, collapsible spacer and pinion nut.
find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -