Digital Dispensary

Product Sections


Best Sellers

Gasket Exhaust Manifold to Down Pipe

Gasket Exhaust Manifold to Down Pipe

0.96

Application: Series 1, 2 & 3 four cylinder engines.
Description: Square flange gasket for exhaust. Used on various exhaust manifolds and on some pipe to pipe exhaust joints.
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Gaiter for Main Gear Lever

Gaiter for Main Gear Lever

2.16

Application: Series 1, Series 2, Series 2A and Series 3 4 & 6 cylinder models.

Description: Reproduction rubber gaiter for main gear lever.

Approximare dimensions: 11.5cm(4.5") square, 3.6cm(1.4") high.

find out more

Brass Nut 5/16"BSF

Brass Nut 5/16

1.86

Application: Series1 exhaust manifold.

Description: Brass nut 5/16"BSF for holding downpipe to exhaust manifold.

Approximate dimensions: 3/8"(9.5mm) high, 17/32"(13.5mm) across flats.

find out more

Rear Shock Absorber

Rear Shock Absorber

18.74

Application: Series 1 1954 onwards, Series 2 and 3 short wheel base models.
Description: Replacement rear shock absorber by Armstrong.
Approximate dimensions: Overall length closed 36.2cm(14.3"), overall length open 55.5cm(21.9").
Original part number 501445
find out more

Inner Wheel Hub Seal

Inner Wheel Hub Seal

4.28

Application: Series 1 front axles, Series 2 & Series 3 to 1980.
Description: Inner hub oil seal made by Corteco/Gaco.
Approximate dimensions: outside diameter 85mm (3.35"), thickness 7.8mm (0.3").
Original part number 239422.

find out more

Condenser S1 1.6 litre

Condenser S1 1.6 litre

15.30

Application: Series 1 1600cc engine 1948 to 1953.
Description: Condenser for distributor, equivalent to Lucas 407044
Approximate dimensions: ovelall length 44mm(1.7"), overall diameter 17mm(0.7")
find out more

Gasket for Differential to Axle Casing

Gasket for Differential to Axle Casing

0.60

Application: Rover type differentials on Series 1, 2 & 3. Range Rover Classic, Defender and Discovery 1.
Description: replacement gasket for differential assembly to axle casing.
Approximate dimensions: overall diameter 24.4cm (9.6")
find out more

Remover/Replacer Hub

Remover/Replacer Hub

359.50

Application: Discovery 3/4, Range Rover Sport and Range Rover 3 (L322).
Description: Kit of 11 tools for removing and replacing front and rear wheel hubs.

Old part number: LRT-60-030
find out more

These Superb Prices are ONLY available when you order ON-LINE

Land Rover Parts & Spares from Dingocroft - your reliable Land Rover parts specialist


All models 1948 to latest.
Full range of Genuine, Allmakes, Britpart and Bearmach parts, accessories, upgrades, tools and manuals are available.



Welcome to Dingocroft
WelcomeWelcome

Particularly genuine and original equipment Land Rover parts and Land Rover spares. Based in UK and exporting to the world. We supply parts for Range Rover Classic, Range Rover Generation 2 (38A), Range Rover Generation 3, Range Rover Sport, Range Rover Evoque, Discovery 1, 2, 3 & 4, Defender, Freelander 1, Freelander 2, North American Spec. vehicles, Series 1 Series 2, Series 2A, Series 3, One-Ten, Ninety, One-Thirty and Military Models. Land Rover Series 1 parts 1948 to 1958 are now listed in our online shop.

We now stock Terrafirma Accessories.

We export Land Rover parts and Land Rover spares to USA and Canada!

DINGOCROFT offers World-wide export of Land Rover parts and Land Rover spares including USA and Canada, from a small item in a padded envelope to a container load (or anything in between).

We also offer mail order deliveries within the U.K. of Land Rover parts online.

Our delivery service operates within a 20 mile radius of High Wycombe. This provides Land Rover parts and Land Rover spares to your doorstep, whether you are a private customer, trade, garage or fleet customer. This service covers all of Buckinghamshire plus large areas of Oxfordshire, Berkshire, Hertfordshire, Middlesex and West London. This is free for orders greater than £75.00, otherwise a £4.00 delivery charge is made. We make frequent deliveries to the following towns; High Wycombe, Beaconsfield, Aylesbury, Marlow, Princes Risborough, Wendover, Slough, Maidenhead, Reading, Bracknell, Watford, Berkhamsted, Hemel Hempstead, Leighton Buzzard, Uxbridge, Hayes, West Drayton, Staines, Thame, Henley on Thames, Watlington.

DINGOCROFT stocks in excess of 12,000 lines of Land Rover parts and Land Rover spares and we are the largest independent Land Rover parts specialist in Buckinghamshire and probably in the Thames Valley. As well as Land Rover parts and Land Rover spares, we offer Land Rover manuals, Land Rover Special Tools (formerly Churchill Tools), Land Rover accessories and off-road equipment. Your one stop Land Rover parts shop.

Our sales counter is open to both trade and retail customers where our knowledgeable staff will help you select from our ever growing range of Land Rover parts and Land Rover spares, tools, accessories, books and all manner of things "Land Rover".

Opening Hours We are open weekdays from 8:30 to 18:00 with late night opening on Thursday to 8pm (20:00).

If you need help or assistance in anyway please telephone us on 01494 448367 or if outside Great Britain +44 1494 448367

Celebration TimeCelebration Time
Chris Barrie and most of our staff enjoy a photo opportunity. 30th anniversary 2015.

Left to right; David Britnell (occasional help), Chris Hopkins, Tim Britnell, Chris Barrie, Peter Newcombe, Debbie, Pete Cook, Chris Cox and Henry Swanborough

Best Selling Items

Gasket Exhaust Manifold to Down Pipe

Gasket Exhaust Manifold to Down Pipe

0.96

Application: Series 1, 2 & 3 four cylinder engines.
Description: Square flange gasket for exhaust. Used on various exhaust manifolds and on some pipe to pipe exhaust joints.
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Gaiter for Main Gear Lever

Gaiter for Main Gear Lever

2.16

Application: Series 1, Series 2, Series 2A and Series 3 4 & 6 cylinder models.

Description: Reproduction rubber gaiter for main gear lever.

Approximare dimensions: 11.5cm(4.5") square, 3.6cm(1.4") high.

find out more

Brass Nut 5/16"BSF

Brass Nut 5/16

1.86

Application: Series1 exhaust manifold.

Description: Brass nut 5/16"BSF for holding downpipe to exhaust manifold.

Approximate dimensions: 3/8"(9.5mm) high, 17/32"(13.5mm) across flats.

find out more

Rear Shock Absorber

Rear Shock Absorber

18.74

Application: Series 1 1954 onwards, Series 2 and 3 short wheel base models.
Description: Replacement rear shock absorber by Armstrong.
Approximate dimensions: Overall length closed 36.2cm(14.3"), overall length open 55.5cm(21.9").
Original part number 501445
find out more

Inner Wheel Hub Seal

Inner Wheel Hub Seal

4.28

Application: Series 1 front axles, Series 2 & Series 3 to 1980.
Description: Inner hub oil seal made by Corteco/Gaco.
Approximate dimensions: outside diameter 85mm (3.35"), thickness 7.8mm (0.3").
Original part number 239422.

find out more

Condenser S1 1.6 litre

Condenser S1 1.6 litre

15.30

Application: Series 1 1600cc engine 1948 to 1953.
Description: Condenser for distributor, equivalent to Lucas 407044
Approximate dimensions: ovelall length 44mm(1.7"), overall diameter 17mm(0.7")
find out more

Gasket for Differential to Axle Casing

Gasket for Differential to Axle Casing

0.60

Application: Rover type differentials on Series 1, 2 & 3. Range Rover Classic, Defender and Discovery 1.
Description: replacement gasket for differential assembly to axle casing.
Approximate dimensions: overall diameter 24.4cm (9.6")
find out more

Remover/Replacer Hub

Remover/Replacer Hub

359.50

Application: Discovery 3/4, Range Rover Sport and Range Rover 3 (L322).
Description: Kit of 11 tools for removing and replacing front and rear wheel hubs.

Old part number: LRT-60-030
find out more

New Products

Steering Arm - Series 1

Steering Arm - Series 1

17.82

Application: Series 1 models 1948 to 1956 approx.

Description: Drop arm for early type steering box. This arm is held in place with a pinch bolt.

Approximate dimensions: Overall length 17.4cm(6.9")

find out more

'D' Washer - Pedal Shaft

'D' Washer - Pedal Shaft

0.96

Application: Series 1 models.

Description: 'D' washer for support shaft for brake and clutch pedals.

Approximate dimensions: Outside diameter 38mm(1.5"), thickness 3mm(1/8").


find out more

Fixing Kit for Manifolds - Metric

Fixing Kit for Manifolds - Metric

12.83

Application: Series 3 from 1980 with 2.25 litre petrol engine.

Description: Metric threaded kit of fixings to hold manifolds to cylinder head. Kit includes 6 bolts, 2 set screws, 3 studs, 9 plain washers, 11 lock washers, 3 nuts, 2 clamps and 2 lockers

find out more

Fixing Kit for Manifolds - Imperial

Fixing Kit for Manifolds - Imperial

10.20

Application: Series 2 and Series 3 to approx 1980 with 2.25 litre petrol engine.

Description: Imperial (inch) threaded kit of fixings to hold manifolds to cylinder head. Kit includes 6 bolts, 2 set screws, 3 studs, 9 plain washers, 11 lock washers, 3 nuts, 2 clamps and 2 lockers

find out more

Shackle Plate Rear

Shackle Plate Rear

11.16

Application: Series1 1948 to 1953.

Description: Shackle plate for rear springs with plain 9/16" diameter holes.

Approximate dimensions: Length 113mm(4.45"), width 38mm(1.5"), thickness 9.2mm(0.36")
find out more

Shackle Plate Rear

Shackle Plate Rear

13.02

Application: Series 1 1948 to 1953.

Description: Shackle plate for rear springs with 1/2"BSF threaded holes.

Approximate dimensions: Length 113mm(4.45"), width 38mm(1.5"), thickness 9.2mm(0.36")

find out more

Clip for 3/16" Brake Pipe

Clip for 3/16

1.39

Application: Series1, Series2/2A and Series3 models.

Description: Reproduction stainless steel clip for brake pipes. Intended for 3/16" pipe, but will work with 1/4" diameter pipe also.

Approximate dimensions: Length 20mm(0.8"), width 10mm(3/8"), height 5mm(0.2"), hole diameter 4mm(0.16").

find out more

Rear End-plate for Cylinder Head

Rear End-plate for Cylinder Head

97.66

Application: Series 1 petrol models 1948 to 1958, Series 2 models with 2 litre petrol engine.

Description: Reproduction end plate in cast aluminium with mounting aperature for thermo switch.

Approximate dimensions: Length 91mm(3.6"), height 84mm(3.3"), depth 18.4mm(0.72")

find out more

 

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Steering Arm - Series 1

Steering Arm - Series 1

17.82

Application: Series 1 models 1948 to 1956 approx.

Description: Drop arm for early type steering box. This arm is held in place with a pinch bolt.

Approximate dimensions: Overall length 17.4cm(6.9")

find out more

'D' Washer - Pedal Shaft

'D' Washer - Pedal Shaft

0.96

Application: Series 1 models.

Description: 'D' washer for support shaft for brake and clutch pedals.

Approximate dimensions: Outside diameter 38mm(1.5"), thickness 3mm(1/8").


find out more

Fixing Kit for Manifolds - Metric

Fixing Kit for Manifolds - Metric

12.83

Application: Series 3 from 1980 with 2.25 litre petrol engine.

Description: Metric threaded kit of fixings to hold manifolds to cylinder head. Kit includes 6 bolts, 2 set screws, 3 studs, 9 plain washers, 11 lock washers, 3 nuts, 2 clamps and 2 lockers

find out more

Fixing Kit for Manifolds - Imperial

Fixing Kit for Manifolds - Imperial

10.20

Application: Series 2 and Series 3 to approx 1980 with 2.25 litre petrol engine.

Description: Imperial (inch) threaded kit of fixings to hold manifolds to cylinder head. Kit includes 6 bolts, 2 set screws, 3 studs, 9 plain washers, 11 lock washers, 3 nuts, 2 clamps and 2 lockers

find out more

Shackle Plate Rear

Shackle Plate Rear

11.16

Application: Series1 1948 to 1953.

Description: Shackle plate for rear springs with plain 9/16" diameter holes.

Approximate dimensions: Length 113mm(4.45"), width 38mm(1.5"), thickness 9.2mm(0.36")
find out more

Shackle Plate Rear

Shackle Plate Rear

13.02

Application: Series 1 1948 to 1953.

Description: Shackle plate for rear springs with 1/2"BSF threaded holes.

Approximate dimensions: Length 113mm(4.45"), width 38mm(1.5"), thickness 9.2mm(0.36")

find out more

Clip for 3/16" Brake Pipe

Clip for 3/16

1.39

Application: Series1, Series2/2A and Series3 models.

Description: Reproduction stainless steel clip for brake pipes. Intended for 3/16" pipe, but will work with 1/4" diameter pipe also.

Approximate dimensions: Length 20mm(0.8"), width 10mm(3/8"), height 5mm(0.2"), hole diameter 4mm(0.16").

find out more

Rear End-plate for Cylinder Head

Rear End-plate for Cylinder Head

97.66

Application: Series 1 petrol models 1948 to 1958, Series 2 models with 2 litre petrol engine.

Description: Reproduction end plate in cast aluminium with mounting aperature for thermo switch.

Approximate dimensions: Length 91mm(3.6"), height 84mm(3.3"), depth 18.4mm(0.72")

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -