Digital Dispensary

Product Sections


Best Sellers

Brass Nut 5/16"BSF

Brass Nut 5/16

1.66

Application: Series1 exhaust manifold.

Description: Brass nut 5/16"BSF for holding downpipe to exhaust manifold.

Approximate dimensions: 3/8"(9.5mm) high, 17/32"(13.5mm) across flats.

find out more

Grommet - Brake Pipe Support

Grommet - Brake Pipe Support

0.31

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Grommet to support brake pipe on rear axle casing. Used with clip 56666.
Approximate dimensions: overall length 21.5mm(0.85"), inside diameter 7mm(0.3"), outside diameter 14.5mm(0.6")
find out more

Clip for brake pipe grommet

Clip for brake pipe grommet

0.61

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Clip for brake pipe support grommet 6860L. Used on rear axle casing on all Series models from 1954 to 1984.
Approximate dimensions: 11mm(7/16") wide, 34mm(1.3") long, mounting hole 5mm(0.2") diameter, internal diameter of clip when closed 13mm.
find out more

Ignition Coil

Ignition Coil

30.11

Application: Series 1 and Series 2.
Description: Reproduction ignition coil with screw in high tension connection. Supplied with acorn nut and split washer.
Approximate dimensions: Body diameter 54.8mm(2.2"), height 15cm(5.9")
find out more

Stud for Exhaust Manifold

Stud for Exhaust Manifold

1.85

Application: Series 1 1.6 and 2.0 litre, Series 2 2 litre.

Description: Stud to hold downpipe to exhaust manifold.

Approximate dimesions: 5/16"BSF threads to both ends, overall length 1.25"(32mm)

find out more

Black High Tension Lead, Copper Cored

Black High Tension Lead, Copper Cored

1.86

Application: Series One and Series Two
Description: Black high tension cable for spark plugs. 7mm(0.28") outside diameter with 19 strand copper core.

Sold by the metre
find out more

Rocker Cover Gasket

Rocker Cover Gasket

7.72

Application: 1.6ltr and 2.0ltr petrol (gasolene) engines.

Description: Gasket for rocker cover to cylinder head.
find out more

Gasket Exhaust Manifold to Down Pipe

Gasket Exhaust Manifold to Down Pipe

0.96

Application: Series 1, 2 & 3 four cylinder engines.
Description: Square flange gasket for exhaust. Used on various exhaust manifolds and on some pipe to pipe exhaust joints.
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

These Superb Prices are ONLY available when you order ON-LINE

Links to other Land Rover sites, suppliers sites and other sites that have taken our fancy.

We have separated them under the following headings; Clubs, Off-road Courses and HolidaysUseful Sources of Land Rover Information, Links to our Supplier Sites, Reciprocal and General Motoring Links and Something Different.

Clubs

4x4/Rover Clubs (National)

4x4/Rover Clubs (UK local)

Off-road Courses and 4x4 Holidays

www.manbymotorplex.com Manby Motorplex is the host venue for the ALRC (Association of Land Rover Clubs) National Rally 2006. Motorsport events are regularly held at the venue, and include car rallies, moto X, enduros, quad racing, supermotos, grass track racing, 4x4 trials, CCVT's, hill rallies, comp safari's, vehicle testing, 4x4 pay and play days and more.

All4x4 Adventure Tours & Holidays

Back to top of page

Useful Sources of Land Rover Information

Rangie.com The Range Rover Knowledge Base. This site has been up and running for several years now and brings together technical items on all things Range Rover. This site could be be thought of as "the bible" on all matters Range Rover.

Off-road com A large American site with information on all sorts of everything 4x4 and off-road. See if you can find the link back to us!

This is a new Land Rover enthusiasts site and we quote from them "LandyZone should become a multilingual platform for friends of Series Land Rover. As a first highlight we have put in LandyVote. You can upload a picture of your Land Rover and put it to others vote. Would you like to test it? Just click here: www.landyzone.com"

I have just been referred to this address http://www.fourfold.org/LR_FAQ/ for some information on Series IIA NADA spec Land Rovers and found a site with an enormous wealth of information on Land Rovers. I thoroughly recommend it.

http://www.cunningham.me.uk/rangie - Everything you wanted to know about the P38A Range Rover but were afraid to ask.

4x4 Mag   the internet magazine for the 4x4 world.

The LR-PARTS site was created for people wanting to buy or sell any Landrover parts, the site has developed very well over last few months averaging around 800-1000 hits per month.

www.4x4breakers.com 'The new generation in parts location'

ROVERVILLE RADIO, UK Independent Land Rover Stereo Repair Sheffield, UK, Tel: 0114 2402798
Email: roverville-uk@valornet.com
Website:
  www.roverville.us

Back to top of page

Links to Our Supplier Sites 

4x4web is a 4x4 website offering links to all 4x4 & Land Rover related sites, clubs etc. etc. They are also our ISP and we can highly recommend their services.

Penrite Oils This site gives you information on Penrite Oils, their stockists and of course a link back to us.

Safety Devices manufacture roll-over bars, roof racks and much more. We can of course supply their products.

Turner Engineering The rebuilding specialists for Land Rover engines & cylinder heads.

We supply the complete range of Allmakes Accessories and are suppliers of Allmakes quality spare parts

Network of 4x4 Specialists for Land Rover and other 4x4 servicing, MOTs,
and all 4x4 repairs.

Back to top of page

Reciprocal and General Motoring Links

We are listed on Car Services Locally

Top4x4Sites is a ranking site with links to many 4x4 sites, have a look and vote for Dingocroft at the same time.

Featured in the UK Motoring Directory  

5 Star Shine are not only promoting car wax, but also provide a links site to all manner of Automotive sites

www.design-a-cover.com for spare wheel covers, seat covers and graphics.


http://www.4x4crazy.co.uk a new 4x4 site and forum. Let's see where it will go!

Back to top of page

Something Different

The Vintage Sports Car Club Very little to do with Land Rovers but a personal interest of the Webmaster. 

Another personal interest of the Webmaster is his wife!! Please see Dawn Britnell Coaching which is the website of his wife who is a freelance BHSII (Reg'd) riding and dressage instructor, trainer, examiner, assessor, trainee dressage judge and coach based nr. Chesham, Bucks.

Also if you have an equestrian bent then you may well find the Bookham Riding Club U.K. site of interest. What's more they have been kind enough to include a link to us in their site!


Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Lever Arm for 4WD Select

Lever Arm for 4WD Select

15.80

Application: Series 1 to 1955.

Description: Lever arm with bronze bush to middle hole for selection of four wheel drive in high ratio.

Approximate dimensions: Overall length 116mm(4.6"), width 15.5mm(0.61"), thickness 6mm(0.24"), distance from centre of bushed hole to centre of slotted hole 36mm(1.42"), distance from centre of bushed hole to other hole is 68mm(2.67")

find out more

Olive for Vacuum Pipe

Olive for Vacuum Pipe

0.84

Application: Series 1 and Series2 with Solex 32PBI carburettor.

Description: Brass olive for use with 1/8" copper pipe.

Approximate dimensions: Length 4.7mm(0.19"), outside diameter 4.7mm(0.19"), internal dimater 1/8"(3.2mm).

find out more

Male Union for Vacuum Pipe

Male Union for Vacuum Pipe

2.40

Application: Series 1 and Series 2A.

Description: Brass male union for 1/8" copper pipe. Threaded to fit Solex 32PBI.

Aproximate dimensions: Length 10mm(0.39"), internal diameter 1/8"(3.2mm), hex 9mm(0.35") across flats, thread 1/4"BSF.

find out more

Grommet for vacuum pipe

Grommet for vacuum pipe

3.83

Application: Series 1 and Series 2A.

Description: Split rubber grommet for us with 214228 retaining clip. Used on 1/8" diameter copper vacuum pipe.

Approximate dimensions: Length 17mm(0.67"), internal diameter 3mm(1/8"), overall diameter 9mm(0.35")

find out more

Retaining Clip for Vacuum Pipe

Retaining Clip for Vacuum Pipe

2.78

Application: Series 1 and Series 2A.

Description: Retaining clip for copper vacuum pipe for advance and retard.

Approximate dimensions: 41.5mm(1.6") x 13mm(0.5") x 9mm(0.35"). Mounting hole 7mm(0.28")

find out more

Installer Oil Seal

Installer Oil Seal

33.79

Application: Evoque and Freelander 2.

Description: Installer for bellhousing differential oil seal. Use with 307-520.

Approximate dimensions: Overall diameter 80mm(3.15"), inside diameter 54mm(2.13"), height 48.5mm(1.9").

find out more

Installer Oilseal

Installer Oilseal

155.89

Application: Evoque and Freelander 2.

Description: Installer for quillshaft oil seal. Use with 307-520.

Approximate dimensions: Overall diameter 80mm(3.15"), height 64mm(2.52").


find out more

Pinion Bearing for Salisbury Differential

Pinion Bearing for Salisbury Differential

12.37

Application: Series 3 Long Wheel Base and Defender 110 models with rear Salisbury axle.

Descrtiption: Timken/Japanese sourced outer pinion taper roller bearing for Salisbury differentials.

Approximate dimensions: Outside diameter 2.85"(72.3mm), inside diameter 1 3/8"(34.9mm), depth 26.7mm(1.05")

Bearing numbers: HM88649/ HM88610

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -