Digital Dispensary

Product Sections


Best Sellers

Drain Tap for Radiator

Drain Tap for Radiator

13.96

Application: Series 1.

Description: Brass drain tap for radiator. 1/4"BSP tapered thread.

Approximate dimensions: Overall length 40mm(1.6").

find out more

Felt Seal Stub Shaft to Drive Flange

Felt Seal Stub Shaft to Drive Flange

0.48

Application: Series 1 front axles, Series 2 front and rear axles, Series 3 SWB front and rear axles.
Description: Felt seal for 10 spline axle shafts to outer drive flanges.
Original part number 272086
find out more

Nut and Bolt Kit for Propshafts

Nut and Bolt Kit for Propshafts

2.40

Application: Series 1, Series 2, Series 2A, Series 3 Land Rovers. All Defenders, Classic Range Rover, Range Rover 2 (38A), Discovery 1 and Discovery 2.

Description: Set of four 3/8UNF x 1.125" long bolts plus four short nyloc nuts.
find out more

Spark Plug Champion N5C

Spark Plug Champion N5C

2.14

Application: Series 2A and Series 3 4 cylinder engines with 7:1 compression ratio and all 6 cylinder Series engines. Also applicable to Series 1 engines.
Description: Champion N5C spark plug, original equipment.
Supersession of Series 1 part number 262796.
find out more

Genuine Oil Filter Element RTC3183

Genuine Oil Filter Element RTC3183

5.78

Application: Series1 2 litre petrol, S2A & S3 2.6 litre 6 cylinder petrol.

Approximate dimensions: 70mm diameter x 173mm long.

find out more

Pair of Gearbox Mounts for Series 1

Pair of Gearbox Mounts for Series 1

111.60

Application: Series One 1948 to 1957.

Description: Kit of 18 items to make up pair of gearbox mounts. Mounting bolts are 3&7/16" long.

find out more

Axle Set of Brake Shoes - 10"

Axle Set of Brake Shoes - 10

33.94

Axle set of 4 10inch brake shoes by Mintex plus 4x pull-off springs, 6x imperial brake drum screws, 2x metric brake drum screws, 2 locking plates and 4 screws for anchor plates.

Application: Series1 80", 86" & 88" front and rear axles, Series 2/2A SWB front and rear, Series3 SWB front and rear to June 1980, Series3 SWB rear only from July 1980, Defender 90 rear to 1994.

Previous part numbers for shoes: RTC3411, GBS728, 505675, 505676
find out more

Rocker Cover Gasket

Rocker Cover Gasket

7.72

Application: 1.6ltr and 2.0ltr petrol (gasolene) engines.

Description: Gasket for rocker cover to cylinder head.
find out more

Seal Kit for Brake Master Cylinder

Seal Kit for Brake Master Cylinder

19.80

Application: Series One from 1948 to 1958.
Description: Reproduction seal kit for brake master cylinder. Suits all short wheel base models. Not suitable for long wheel base models.
Original part number 278524
find out more

These Superb Prices are ONLY available when you order ON-LINE

Prancer's Products - Land Rover parts, spares and accessories from Dingocroft, your reliable Land Rover parts specialist.

DINGOCROFT's main business is the supply of Land Rover Genuine and original equipment spare parts & service items, accessories, workshop manuals, parts catalogues, lubricants & fluids.
Apart from Land Rover we also source parts and products from a wide range of other suppliers, many of whom are original equipment suppliers. Here is a list of some of them:-

Allmakes accessories
Automec
copper brake pipes & kits
Autosparks
wiring looms for series 1, Series 2 & 2A, Series 3 and early Defender models.
Bosch
electrical and fuel parts.
Brookland Books
range of Land Rover titles - see web shop
Brownchurch
roof racks, roof tents, expedition gear, etc. 
V.L. Churchill
  special tools, hire & sales
Comma
chemical toolbox sprays & additives, lubricating oils
Coopers
oil, air and fuel filter elements
Crosland
oil, air and fuel filter elements
Dayco
timing and auxiliary drive belts 
DDS  chassis and  body parts, chequer plate and Barbarian winch bumpers, rock sliders etc
De Carbon high pressure gas filled shock absorbers
Detroit
locking differentials
D S M ropes, strops & shackles
Exmoor Trim seating, hoods etc
Haynes Publications
  manuals & books 
Jackall 8000
highlift jacks & accessories
Kenlowe
electric cooling fans & engine pre-heaters
Lockheed (Delphi)
hydraulic and brake components
Lucas/Girling
electrical and hydraulic components
Lumenition
Optronic and Magnetronic ignition and related items
Magneti Marelli
electrical components
Mantec
raised air intakes
Mintex
brake shoes and brake pads
Penrite Oils
for classic and earlier cars and bikes. Including most Land Rover models.
Pewag
snow chains
Pivlock
swingaway spare wheel carriers
R H Engineering
Polybush suspension bush kits & Bushwaka tools
Ring Automotive
auxiliary lighting
Securon
replacement seatbelts
Sparex
  towing couplings
Superwinch
winches and winching equipment
Terra Firma extreme accessories
Turner Engineering
engines & cylinder heads
Valeo
electrical and clutch components
Weber, Zenith, Solex, S U & Stromberg
carbs & parts
Wipac
Quadoptic halogen headlamp conversion sets

Sorry, there are not links for all of the above. However we are very happy to receive your enquiries on any Land Rovers parts, accessories, off-road equipment or what ever you need. Contact us for


Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Spigot Bush Removal Tool

Spigot Bush Removal Tool

102.07

Application: Defender 2007 onwards with Puma 2.4 or Puma 2.2 litre diesel engine.

Description: Tool for removing the spigot bush from rear of crankshaft.

Approximate dimensions: Overall length 19.5cm(7.7")

find out more

46mm Bi-hex Deep Socket

46mm Bi-hex Deep Socket

28.46

Application: Freelander 2 and Evoque.

Description: Chrome molybdenum 46mm bi-hex deep socket for front differential pinion nut. 1/2" drive and 78mm deep.

find out more

Series1 Cylinder Head bolt Set

Series1 Cylinder Head bolt Set

149.54

Application: Series 1 1600 and 2 litre petrol engines, Series2 2 litre petrol engine.

Description: Set of fixings for cylinder head comprising of the following;
2x nut 212702, 2x stud 212332, 4x short bolt 237345, 4x medium bolt 212334, 6x long bolt 212335
find out more

Installer Oil Seal

Installer Oil Seal

91.60

Description: Black nylon tool for installing transmission output shaft seal.

Approximate dimensions: Overall length 185mm(7.3"), outside diameter 79mm(3.1")

Alternative tool number: 22-1803

find out more

Replacer Rear Crankshaft Seal

Replacer Rear Crankshaft Seal

82.56

Application: 200TDi, 2.5 petrol, 2.5 diesel.

Description: Tool for replacing the rear crankshaft oil seal.

Approximate dimensions: Outside diameter 126mm(5"), inside diameter 22mm(0.9"), thickness 23.5mm(0.9")

Old tool number: 18G.134-11

New tool number: 303-830

find out more

V8 Badge

V8 Badge

13.36

Application: Any model fitted with V8 engine.

Description: Polished aluminium badge, self adhesive..

Approximate dimensions: Length 9.2cm(3.6"), height 2.75cm(1.1"), thickness 4mm(0.2")

find out more

Fuel Filler Cap

Fuel Filler Cap

144.31

Application: Range Rover Classic 1974 to 1985.

Description: Locking fuel cap suplied with 2 keys.

Approximate dimensions: 11.1cm(4.4") x 11.3cm(4.5") x 4.4cm(1.7")

find out more

Alignment Pins

Alignment Pins

53.27

Application: Freelander 2 and Evoque.

Description: Pair of pins for aligning front subrame to bodyshell.

Approximate dimensions: Overall length 168mm(6.6"), pin diameter 20mm(0.8")

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -