Digital Dispensary

Product Sections


Best Sellers

Copper Ring Water Pump to Thermostat Housing

Copper Ring Water Pump to Thermostat Housing

7.44

Application: Series One with 1.6 or 2 litre petrol engine. Series Two with 2 litre petrol engine.
Description: Copper ring to support 'O' ring between water pump and thermostat housing.
Approximate dimensions: outside diameter 16mm(0.63"), inside diameter 11mm(0.43"), height 7.5mm(0.3")
find out more

Grommet for vacuum pipe

Grommet for vacuum pipe

4.37

Application: Series 1 and Series 2A.

Description: Split rubber grommet for us with 214228 retaining clip. Used on 1/8" diameter copper vacuum pipe.

Approximate dimensions: Length 17mm(0.67"), internal diameter 3mm(1/8"), overall diameter 9mm(0.35")

find out more

Retaining Clip for Vacuum Pipe

Retaining Clip for Vacuum Pipe

2.78

Application: Series 1 and Series 2A.

Description: Retaining clip for copper vacuum pipe for advance and retard.

Approximate dimensions: 41.5mm(1.6") x 13mm(0.5") x 9mm(0.35"). Mounting hole 7mm(0.28")

find out more

Gaiter for Main Gear Lever

Gaiter for Main Gear Lever

2.16

Application: Series 1, Series 2, Series 2A and Series 3 4 & 6 cylinder models.

Description: Reproduction rubber gaiter for main gear lever.

Approximare dimensions: 11.5cm(4.5") square, 3.6cm(1.4") high.

find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Vacuum Pipe Elbow

Vacuum Pipe Elbow

2.34

Application: Series 2 and 3 petrol engined models.

Description: Rubber elbow connector for vacuum pipe to distributor and/or to inlet manifold.

Approximate dimensions: Outside diameter 11mm(7/16"), internaldiameter 3mm(0.12") one end and 4mm(0.16") the other end. length 28mm(1.1") x 23mm(0.91").

find out more

Vacuum Advance Pipe

Vacuum Advance Pipe

18.00

Application: Series 1 petrol engines.

Description: 28"(70cm) long 1/8" diameter copper pipe with brass nut and nipple(soldered on). This is connection for distributor. Use 260707 and 260708 for connection to caburetor.

find out more

Gasket Set for Solex 32PBI-2 Carburettor

Gasket Set for Solex 32PBI-2 Carburettor

9.30

Application: Series 1 2.0litre engine 1952 to 1958 fitted with Solex 32PBI-2 carburettor.

Description: Set of 6 gaskets and 8 fibre washers for this carburettor
find out more

Solid Aluminium Rivets - 3/8" long - bag of 50

Solid Aluminium Rivets - 3/8

15.00

Application: Series 1, Series 2 and Series 3.

Description: Bag of 50 solid aluminium round head rivets 3/16" diameter by 3/8" long stem. The head is 8.5mm diameter and overall length of rivet is 13mm.
find out more

These Superb Prices are ONLY available when you order ON-LINE

Garage and Fleet Customers

Dingocroft - your reliable Land Rover Parts Specialist - has over 25 years experience of supplying parts to Garage and Fleet Customers. 

Delivery - Our delivery service operates within a 20 mile radius of High Wycombe. We offer a daily delivery to our garage and fleet customers. This provides Land Rover parts to your doorstep. This service covers all of Buckinghamshire plus large areas of Oxfordshire, Berkshire, Hertfordshire, Middlesex and West London. This is free for orders greater than £75.00, otherwise a £4.00 delivery charge is made. 

Parts Supplied - we can supply the full range of Genuine Land Rover Parts. Also top brands of service and repair parts at considerable saving compared to their genuine counterparts. Plus for older models we offer budget priced alternatives as well. 
Not only service items and mechanical items, but also panels, glass, interior trim, lubricants and special tools.

Trade Discounts - are offered on verification of status.

Knowledgeable Staff - our friendly  and knowledgeable staff will help to supply you the correct parts first time.  They will also rapidly source out of stock items from our large and diverse range of suppliers.

Sales Hotline - 01494 448367

 

We supply parts for Range Rover Classic, Range Rover Generation 2 (38A), Range Rover Generation 3, Range Rover Sport, Discovery 1, 2, 3 & 4, Defender, Freelander 1, Freelander 2, North American Spec. vehicles, Series 1 Series 2, Series 2A, Series 3, One-Ten, Ninety, One-Thirty and Military Models. 

Feedback Form

DINGOCROFT stocks in excess of 12,000 lines of Land Rover parts and we are the largest independent Land Rover specialist in Buckinghamshire and probably in the Thames Valley. As well as Land Rover parts, we offer Land Rover manuals, Land Rover Special Tools (formerly Churchill Tools), Land Rover accessories and off-road equipment. Your one stop Land Rover parts shop.

Opening Hours We are open weekdays from 8:30 to 18:00 with late night opening on Thursday to 8pm (20:00). 

If you need help or assistance in anyway please telephone us on 01494 448367 or if outside Great Britain +44 1494 448367


Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Mounting Pad for Fuel Pump

Mounting Pad for Fuel Pump

9.58

Application: SU fuel pumps on Series1 and early Series2 models.

Description: Rubber mounting pad for SU electric fuel pump.

Approximate dimensions: 83mm x 60mm x 6mm(3.3" x 2.4" x 0.25")

find out more

Hub Support

Hub Support

372.84

Application: Freelander 2 and Evoqur.

Description: Support for hub to aid removal of bearing using press.

Approximate dimensions: Overall diameter 20.5cm(8.1"), height 16.2cm(6.4")

find out more

Spring - Brake Light Switch

Spring - Brake Light Switch

6.52

Application: Series 1 1954 to 1958.

Description: Reproduction spring for activating the brake light switch.

Approximate dimesions: Overall length 13.5cm(5.3"), overall diameter 10mm(3/8")

find out more

Washer - Shocker Retention

Washer - Shocker Retention

0.50

Application: Series 1 1948 to 1953.

Description: Washer for retaining shock absorbers onto their mounts.

Approximate dimensions: Outside diameter 1.25"(32mm), inner diameter 7/16"(11mm), thickness 1/8"(3mm).

Old part number: 217245
find out more

Push Rod - Master Cylinder

Push Rod - Master Cylinder

22.32

Application: Series 1 1954 to 1958 with 10" drums.

Description: Reproduction pushrod for brake master cylinder. With 3/8"UNF thread and kexagonal collar.

Approximate dimesions: overall length 12.1cm(4.76")



find out more

Lock Nut 1/2" BSF

Lock Nut 1/2

2.34

Application: Series1 and Series2.

Description: Lock nut (or half nut) 1/2"BSF. Used as lock nut for main gear lever and possibly elsewhere on these models.

Approximate dimensions: 13/16" across flats(20.6mm), 7.3mm(0.29") deep.

find out more

Wiper Blade Series 3 Flat Type

Wiper Blade Series 3 Flat Type

3.26

Application: Series2A from suffix G and Series3.

Description: 10" long flat blade with black finish frame for wiper arms 5.2mm wide.

Old part number: GWB274

find out more

Wiper Blade 10" Series3

Wiper Blade 10

3.36

Application: Series 3 fitted with 5.2mm or 7.0mm bayonet end wiper arms.

Description: 10" wiper blades with black finished sprung frame. Supplied with adaptors to suit either 5.2mm or 7.0mm wide arms.
find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -