Digital Dispensary

Product Sections


Best Sellers

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Gaiter for High/Low Gear Lever

Gaiter for High/Low Gear Lever

2.46

Application: Series 1, Series 2/2A and Series 3.

Description: Reproduction rubber gaiter for the high/low gear lever.

Approximate dimensions: Overall length 143mm, height 90mm.

find out more

Male Union for Vacuum Pipe

Male Union for Vacuum Pipe

3.25

Application: Series 1 and Series 2A.

Description: Brass male union for 1/8" copper pipe. Threaded to fit Solex 32PBI.

Aproximate dimensions: Length 10mm(0.39"), internal diameter 1/8"(3.2mm), hex 9mm(0.35") across flats, thread 1/4"BSF.

find out more

Sump Gasket Series 1

Sump Gasket Series 1

10.82

Application: Series 1 1600cc or 2000cc petrol (gasolene) engine.
Description: Original cork sump gasket, manufactured in the 1950's.
find out more

'O' Ring for Thermostat

'O' Ring for Thermostat

0.55

Application: Series 1, 2 & 3 4cylinder engines.
Description: 'O' ring for sealing thermostat to cylinder head.
Approximate dimensions: outside diameter 55mm (2.2").
Original part number 01645
find out more

Swivel Housing Outer Seal

Swivel Housing Outer Seal

13.78

Application: Series 1, 2 & 3 front axles.
Description: Genuine oil seal for swivel housings.
Approximate dimensions: Outside diameter 16.8cm (6.6"), thickness 14.7mm (0.58")
Original part number: 502406.
find out more

Grommet for vacuum pipe

Grommet for vacuum pipe

4.37

Application: Series 1 and Series 2A.

Description: Split rubber grommet for us with 214228 retaining clip. Used on 1/8" diameter copper vacuum pipe.

Approximate dimensions: Length 17mm(0.67"), internal diameter 3mm(1/8"), overall diameter 9mm(0.35")

find out more

Set of Rivets for Bonnet Strip

Set of Rivets for Bonnet Strip

10.22

Application: Series 1 and early Series 2A.

Description: Set of 12 bifurcated rivets in black for retaining the bonnet rest strip 300824A.

Approximate dimensions: Head diameter 9.5mm(3/8"), length 14mm(9/16"), shank diameter 4.8mm(3/16").

find out more

Series1, 2 & 3 Wheel Bearing Kit with Japanese Bearings

Series1,  2 & 3 Wheel Bearing Kit with Japanese Bearings

39.94

Application: Series 1 front axle only, Series 2, Series 2A and Series 3 to 1980. Where inner bearing is larger than outer bearing. Covers both long and short wheel base vehicles, suitable for either front or rear wheel.

Description: Kit of parts to service one wheel hub. Kit comprises inner and outer Japanese manufactured wheel bearings (NTN or similar brand), Gaco inner seal, flange gasket, hub nut locker, felt outer seal, 'o' ring outer seal and split pin.

find out more

These Superb Prices are ONLY available when you order ON-LINE

To search for a product enter search words below. The results will be displayed with links to the specified product. Note that price based searches operate on retail prices and may not match the price you pay.

Search words

Look for products containing all any of the above words
Price range

See Dingo Dotty Deals now for offers too good to miss!!!!

Welcome

Welcome to DINGOCROFT
your reliable
Land Rover parts
specialist.

We are LAND ROVER GENUINE AND ORIGINAL EQUIPMENT PARTS STOCKISTS
We supply parts for Range Rover Classic, Discovery 1, Discovery 2, Discovery 3 (LR2), Defender, Range Rover 38A (2nd generation), Range Rover Generation 3, Range Rover Sport. North American Spec. vehicles, Ser I, II, IIA, III, One Ten, Ninety, Military Models, Freelander 1 and Freelander 2.
In Dingocroft's Digital Dispensary you will find only a small proportion of the full range of the goods we can supply. Here are the goods you can self-select. However since we can supply almost anything you may require for your Land Rover, please ask for your personal quotation via e-mail, fax or telephone.
DINGOCROFT offers World-wide export including USA and Canada, from a small item in a padded envelope to a container load (or anything in between).
We also offer mail order deliveries within the U.K.
Our free van delivery service operates within a 20 mile radius of High Wycombe for orders over £75 otherwise a £4 delivery charge is made. This is available to our private customers as well as to our trade, garage and fleet customers.
DINGOCROFT also has a sales counter open 5 days a week where an ever growing range of parts, tools, accessories, books and all manner of things "Land Rover" are on display.


LAND Rover Series     One PartsLAND Rover Series One Parts
A range of Series One parts from 1948 to 1958. This covers those parts that we sell regularly and/or that we have good stock of.
Other parts are available on a quotation basis only as supply is now difficult or almost impossible on many items.
LAND Rover Series 2 & Series 3 PartsLAND Rover Series 2 & Series 3 Parts
A range of parts for Series 2, 2A and 3 models from 1959 to 1983. These are the more regularly sold maintenance and repair parts.
Most (but not all) parts are still available for these models, if you do not see what you want send us an email and we will do our best to provide a quotation.
DEFENDER PartsDEFENDER Parts
A range of parts for Defender inclluding the early models when they were called Landrover 90, Landrover 110 and Landrover 127. This covers all models from 1983 until 2015. These are the more regularly sold maintenance and repair parts.
Most (but not all) parts are still available for these models, if you do not see what you want send us an email and we will do our best to provide a quotation.
DISCOVERY 1 partsDISCOVERY 1 parts
A range of parts for Discovery 1 models from 1989 to 1998. These are the more regularly sold maintenance and repair parts.
Most (but not all) parts are still available for these models, if you do not see what you want send us an email and we will do our best to provide a quotation.
RANGE ROVER Classic PartsRANGE ROVER Classic Parts
A range of parts for Range Rover Classic models from 1972 to 1995. These are the more regularly sold maintenance and repair parts.
Unfortunately a lot of parts are no longe lavailable for these models, particularly body and trim. If you do not see what you want send us an email and we will do our best to provide a quotation.
FREELANDER 1 PartsFREELANDER 1 Parts
Freelander 1, 1996 to 2004. Here we list a range of the most frequently needed parts for this model.
However if you need something that is not listed, drop us an email and we can quote for it.
REGULAR Service and Repair PartsREGULAR Service and Repair Parts
This section covers regular service items and common distress purchases. We start with Filters, but more sections will follow soon.
POLYBUSH suspension bushesPOLYBUSH suspension bushes
Polybush, the originator of polyurethane suspension bushes for Land Rover vehicles.
Polyurethane is a superior material which is strong, yet elastic, highly abrasion resistant and which doesn't age or perish, even if soaked in oils and fuel.
Polybushes and Four Wheel Drive Vehicles go together like Peaches and Cream. Four Wheel Drives really use their suspension (with poor roads and speedbumps, even the school run is starting to resembe the Sahara) so you need bushes which will withstand years of twisting, bumping, vibrating, braking and accelerating. What you don't need are bushes which move, rattle or crush causing knocks, creaks and eventually wear to their housings.
Welcome to the world of Polybush! Each bush is tailored to fit beautifully and contribute to excellent handling. The bonus is, Polybushes will give you the same ride quality long after their rubber or cheap urethane counterparts have sagged or split.
OFF-ROAD and Towinq EquipmentOFF-ROAD and Towinq Equipment
Ropes, strops, shackles, towbars, towballs and jerrycans
BOOKS and PublicationsBOOKS and Publications
This section covers Workshop Manuals, Overhaul Manuals, Circuit Diagrams, Electrical Manuals, Parts Lists, Owners Manuals, Other Technical Titles, History, Expedition and General Interest Books.

Lower prices on many books - check and compare!
LAMPS and Electrical ItemsLAMPS and Electrical Items
Auxiliary Lighting, Bulbs, Endurance Essentials, Kenlowe and Lumenition
GIFTSGIFTS
An eclectic mix of gifts and mementos most with the Land Rover theme. So far sections are Headwear, Mugs, Tribute Plaques and Street Signs, Gadgets and Gizmos, Miscellany.
SPECIAL Tools for Land RoverSPECIAL Tools for Land Rover
Land Rover Special tools from Bosch previously Churchill Tools, Laser tools which are directly relevant to Land Rover models and a selection of Land Rover relevant tools from other sources.
BODY and Chassis PartsBODY and Chassis Parts
Body and Chassis parts! A very broad title which will probably be refined as more is added. Just a couple of sections to start with.
DINGO Dotty DealsDINGO Dotty Deals
Our special offer section. A strange mix of special purchases, slow moving or short term special offers to tempt you.
TerraFirmaTerraFirma
Terrafirma (Latin meaning Solid Earth)

The Terrafirma range of accessories and equipment has been created to meet the exceptional demands of Land Rover users and enthusiasts. Distributed Internationally through Allmakes 4x4 authorized parts and accessory dealers Terrafirma is one of the most recognized 4x4 accessory brands in the World.

Terrafirma offers choice, clear product identification and application, ensuring the correct product can be selected from the extensive and increasing range of accessories. To satisfy the diverse requirements of 4x4 owners both on and off road Terrafirma have produced an amazing selection of accessories for Land Rovers. In Particular Terrafirma suspension, which is by far the most comprehensive category including the largest range of upgrade shock absorbers, steering dampers, coil springs and suspension hardware available anywhere in the marketplace.

Terrafirma accessories are designed to fit using original or existing mounting points. Only minimal customising may be required with minor trimming or drilling needed to maximise the performance of the vehicle. Trends change and new vehicle models are introduced, as such new products are continually being evaluated and tested for introduction.

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Steering Arm - Series 1

Steering Arm - Series 1

17.82

Application: Series 1 models 1948 to 1956 approx.

Description: Drop arm for early type steering box. This arm is held in place with a pinch bolt.

Approximate dimensions: Overall length 17.4cm(6.9")

find out more

'D' Washer - Pedal Shaft

'D' Washer - Pedal Shaft

0.96

Application: Series 1 models.

Description: 'D' washer for support shaft for brake and clutch pedals.

Approximate dimensions: Outside diameter 38mm(1.5"), thickness 3mm(1/8").


find out more

Fixing Kit for Manifolds - Metric

Fixing Kit for Manifolds - Metric

12.83

Application: Series 3 from 1980 with 2.25 litre petrol engine.

Description: Metric threaded kit of fixings to hold manifolds to cylinder head. Kit includes 6 bolts, 2 set screws, 3 studs, 9 plain washers, 11 lock washers, 3 nuts, 2 clamps and 2 lockers

find out more

Fixing Kit for Manifolds - Imperial

Fixing Kit for Manifolds - Imperial

10.20

Application: Series 2 and Series 3 to approx 1980 with 2.25 litre petrol engine.

Description: Imperial (inch) threaded kit of fixings to hold manifolds to cylinder head. Kit includes 6 bolts, 2 set screws, 3 studs, 9 plain washers, 11 lock washers, 3 nuts, 2 clamps and 2 lockers

find out more

Shackle Plate Rear

Shackle Plate Rear

11.16

Application: Series1 1948 to 1953.

Description: Shackle plate for rear springs with plain 9/16" diameter holes.

Approximate dimensions: Length 113mm(4.45"), width 38mm(1.5"), thickness 9.2mm(0.36")
find out more

Shackle Plate Rear

Shackle Plate Rear

13.02

Application: Series 1 1948 to 1953.

Description: Shackle plate for rear springs with 1/2"BSF threaded holes.

Approximate dimensions: Length 113mm(4.45"), width 38mm(1.5"), thickness 9.2mm(0.36")

find out more

Clip for 3/16" Brake Pipe

Clip for 3/16

1.39

Application: Series1, Series2/2A and Series3 models.

Description: Reproduction stainless steel clip for brake pipes. Intended for 3/16" pipe, but will work with 1/4" diameter pipe also.

Approximate dimensions: Length 20mm(0.8"), width 10mm(3/8"), height 5mm(0.2"), hole diameter 4mm(0.16").

find out more

Rear End-plate for Cylinder Head

Rear End-plate for Cylinder Head

97.66

Application: Series 1 petrol models 1948 to 1958, Series 2 models with 2 litre petrol engine.

Description: Reproduction end plate in cast aluminium with mounting aperature for thermo switch.

Approximate dimensions: Length 91mm(3.6"), height 84mm(3.3"), depth 18.4mm(0.72")

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -