Digital Dispensary

Product Sections


Best Sellers

Reproduction Solex 32PBI-2 Carburrettor

Reproduction Solex 32PBI-2 Carburrettor

148.78

Application: Series 1 and Series 2 with 2 litre petrol (gasolene) engine. 1954 to 1960 approx.

Description: Reproduction Solex 32PBI-2 carburrettor.

Back in stock.



find out more

Retaining Clip for Vacuum Pipe

Retaining Clip for Vacuum Pipe

2.78

Application: Series 1 and Series 2A.

Description: Retaining clip for copper vacuum pipe for advance and retard.

Approximate dimensions: 41.5mm(1.6") x 13mm(0.5") x 9mm(0.35"). Mounting hole 7mm(0.28")

find out more

Gasket Set for Solex 32PBI-2 Carburettor

Gasket Set for Solex 32PBI-2 Carburettor

8.59

Application: Series 1 2.0litre engine 1952 to 1958 fitted with Solex 32PBI-2 carburettor.

Description: Set of 6 gaskets and 8 fibre washers for this carburettor
find out more

Grommet for vacuum pipe

Grommet for vacuum pipe

4.37

Application: Series 1 and Series 2A.

Description: Split rubber grommet for us with 214228 retaining clip. Used on 1/8" diameter copper vacuum pipe.

Approximate dimensions: Length 17mm(0.67"), internal diameter 3mm(1/8"), overall diameter 9mm(0.35")

find out more

Diaphragm Kit for Solex 32PBI-2

Diaphragm Kit for Solex 32PBI-2

17.04

Application: Series 1 1600cc & 2.0ltr petrol (gasolene).

Description: Diaphragm kit for accelerator pump

find out more

Nut and Bolt Kit for Propshafts

Nut and Bolt Kit for Propshafts

2.40

Application: Series 1, Series 2, Series 2A, Series 3 Land Rovers. All Defenders, Classic Range Rover, Range Rover 2 (38A), Discovery 1 and Discovery 2.

Description: Set of four 3/8UNF x 1.125" long bolts plus four short nyloc nuts.
find out more

Gasket Exhaust Manifold to Down Pipe

Gasket Exhaust Manifold to Down Pipe

0.96

Application: Series 1, 2 & 3 four cylinder engines.
Description: Square flange gasket for exhaust. Used on various exhaust manifolds and on some pipe to pipe exhaust joints.
find out more

Brass Nut 5/16"BSF

Brass Nut 5/16

1.86

Application: Series1 exhaust manifold.

Description: Brass nut 5/16"BSF for holding downpipe to exhaust manifold.

Approximate dimensions: 3/8"(9.5mm) high, 17/32"(13.5mm) across flats.

find out more

Nipple - Fuel pipe

Nipple - Fuel pipe

2.96

Application: Series 1 fuel pipes.

Description: Solder on nipple for 5/16" diameter copper fuel pipe. For use with 2729 union nut.

Apprximate dimensions: Length 13.7mm(0.54"),

find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > RANGE ROVER Classic Parts
Range Rover Classic Books and PublicationsRange Rover Classic Books and Publications
Manuals, parts books etc for Range Rover Classic from 1972 to 1995.
Range Rover Classic EnginesRange Rover Classic Engines
V8 petrol engines, VM 2.4 and 2.5 diesel engines, 200Tdi and 300TDi all featured in the Range Rover Classic.
Range Rover Classic Braking SystemRange Rover Classic Braking System
Discs, pads, cylinders etc for Range Rover Classic.
Range Rover Classic Clutch PartsRange Rover Classic Clutch Parts
Clutch covers, discs, release bearings, hydraulics etc for Range Rover Classic 1972 to 1995.
Range Rover Classic Cooling SystemRange Rover Classic Cooling System
Range Rover Classic cooling system parts - hoses, radiators, thermostats, water pumps etc.
Range Rover Classic DrivelineRange Rover Classic Driveline
Parts for axles, hubs and propshafts.
Range Rover Classic Electrical PartsRange Rover Classic Electrical Parts
All things electrical.
Range Rover Classic FiltersRange Rover Classic Filters
Filter kits and individual filters.
Range Rover Classic Fuel SystemRange Rover Classic Fuel System
Carburettors, pumps, fuel tanks, senders, injectors etc.
Range Rover Classic Gearbox partsRange Rover Classic Gearbox parts
In 1972 the LT95 was introduced with the Range Rover Classic. This box was used to aprox 1982 when the LT77 five speed manual and Borg Warner 3 speed automatic took over. In 1986 the Zf fivespeed auto took over from the Borg Warner and in 1994 the R380 appeared for the last 2 years production on manual versions.
Range Rover Classic Steering componentsRange Rover Classic Steering components
Parts for the steering system on Range Rover Classic 1972 to 1995.
Range Rover Classic Suspension PartsRange Rover Classic Suspension Parts
Shock absorbers, suspension bushes, etc
Range Rover Classic Body ComponentsRange Rover Classic Body Components
A sparse section unfortunately.
Digital Dispensary > RANGE ROVER Classic Parts

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Vacuum Advance Pipe

Vacuum Advance Pipe

18.00

Application: Series 1 petrol engines.

Description: 28"(70cm) long 1/8" diameter copper pipe with brass nut and nipple(soldered on). This is connection for distributor. Use 260707 and 260708 for connection to caburetor.

find out more

Rotary Coupler

Rotary Coupler

102.00

Application: Freelander 1

Description: Rotary coupler for steering wheel electrics.

find out more

Dip Switch - Floor Mounting

Dip Switch - Floor Mounting

42.78

Application: Series 1 1957-58, Series 2 to 1961.

Description: Reproduction headlamp dipping switch.

Approximate dimensions: Overall height 70mm(2.75"), mounting oval 77mmx40mm(2.8" x 1.6")


find out more

Dust Seal for Headlamp

Dust Seal for Headlamp

5.94

Application: Series 1 1957-58, Series 2 to 1961.

Description: Dust seal between outer rim and headlamp.

Approximate dimensions: Outside diameter 195mm(7.7"), inside diameter 166mm(6.5"), back lip 5mm(0.2")

find out more

Headlamp Mounting Gasket

Headlamp Mounting Gasket

6.60

Application: Series 1 1957-58, Series 2 to 1961.

Description: Moulded rubber gasket for headlamp mounting.

Approximate dimensions: outside diameter 20cm(7.9"), inside diameter 16cm(6.3"), thickness 3.7mm(0.15")

find out more

Hub Carrier for Rear Axle

Hub Carrier for Rear Axle

186.00

Application: Series 1 with semi-floating rear axle.

Description: Reproduction rear hub carrier.

Approximate dimensions: Outside diameter 141mm(5.6"), 64.8mm(2.6") long

find out more

Handbrake Linings

Handbrake Linings

34.20

Application: Series 1 and early Series 2.

Description: 2 handbrake shoe linings and 20 hollow copper rivets. We cannot obtain the complete shoes for the early handbrake, so this is the next best thing.

Approximate dimensions: Linings are 44mm(1.73") wide and 177mm(7") long. Copper rivets are 4.3mm(0.17") diameter x 106mm(0.42") long

find out more

Genuine Oil Filter 4 cylinder Series engine

Genuine Oil Filter 4 cylinder Series engine

9.84

Genuine Land Rover oil filter.

Application: Series 2A 2.25 petrol and diesel engines from approx 1965, Series 3 2.25 petrol and diesel engines.

Approximate dimensions: 92mm diameter x 114mm long.

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -