Digital Dispensary

Product Sections


Best Sellers

Air Hose Series 1

Air Hose Series 1

69.60

Application: Series 1 with the 2 litre petrol engine from 1955 to 1958. Also Series 2 with the 2 litre engine.

Description: Reproduction air hose between air filter and carburettor.

Approximate dimensions: Overall length 24.5cm(9.6"), internal diameter 50.8mm(2").

find out more

Brake Master Cylinder and Conversion Kit

Brake Master Cylinder and Conversion Kit

97.50

Application: Series 1 from 1954 to 1958 with 3/16" diameter brake pipes.

Description: Early Series 2 brake master cylinder and conversion kit to allow it to be fitted to Series 1.


Back in stock at long last.

find out more

Nut and Bolt Kit for Propshafts

Nut and Bolt Kit for Propshafts

2.40

Application: Series 1, Series 2, Series 2A, Series 3 Land Rovers. All Defenders, Classic Range Rover, Range Rover 2 (38A), Discovery 1 and Discovery 2.

Description: Set of four 3/8UNF x 1.125" long bolts plus four short nyloc nuts.
find out more

Spider Bypass Link Cable

Spider Bypass Link Cable

11.59

Application: Discovery 1 1995 to 1998 approx, where fitted with original immobilisation and alarm system.
Description: Small wiring harness to bypass the "spider" .
See http://forums.lr4x4.com/index.php?showtopic=86 for full instructions on how to fit.
find out more

Series1, 2 & 3 Wheel Bearing Kit with Japanese Bearings

Series1,  2 & 3 Wheel Bearing Kit with Japanese Bearings

39.94

Application: Series 1 front axle only, Series 2, Series 2A and Series 3 to 1980. Where inner bearing is larger than outer bearing. Covers both long and short wheel base vehicles, suitable for either front or rear wheel.

Description: Kit of parts to service one wheel hub. Kit comprises inner and outer Japanese manufactured wheel bearings (NTN or similar brand), Gaco inner seal, flange gasket, hub nut locker, felt outer seal, 'o' ring outer seal and split pin.

find out more

Land on Stub Axle for Hub Seal

Land on Stub Axle for Hub Seal

9.58

Application: Series 1 front axle, Series 2 and Series 3 upto 1980.
Description: Replaceable land or spacer on stub axle that the wheel hub seal runs on.
Approximate dimensions: outside diameter 2 5/8"(55.8mm), inside diameter 1 13/16" (46mm), depth 7/16"(11mm).
Original part number: 217351
find out more

Pack of 10 3/8" BSF Plain Nuts

Pack of 10 3/8

1.56

Pack of ten 3/8"BSF plain nuts, 19/32"(15mm) across flats, 0.35"(8.8mm) high.
Original part number 2827
find out more

Engine Mount Pair Series One 80"

Engine Mount Pair Series One 80

107.88

Application: 80" wheelbase Series 1 1948 to 1953.

Description: Pair of mounts for engine block with mounting bolts 2&15/16" long.

find out more

Olive for Vacuum Pipe

Olive for Vacuum Pipe

0.84

Application: Series 1 and Series2 with Solex 32PBI carburettor.

Description: Brass olive for use with 1/8" copper pipe.

Approximate dimensions: Length 4.7mm(0.19"), outside diameter 4.7mm(0.19"), internal dimater 1/8"(3.2mm).

find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > BOOKS and Publications
The DVD CollectionThe DVD Collection
ORIGINAL TECHNICAL PUBLICATIONS
NOW AVAILABLE ON DVD
Here are the original Land Rover and Range Rover publications needed to run and maintain your classic Land Rover or Range Rover, including parts catalogues, service manuals, technical information and owners literature and more. What's more, with these DVDs you can find information and links to Land Rover, Land Rover Heritage and Original Technical Publications. Discover more about the history of Land Rover, Land Rover and Range Rover models and get the latest Heritage news and Information. You can also find links to local Land Rover and Range Rover Clubs, the latest picture galleries, video and media archives - you can even download classic Land Rover and Range Rover wallpaper to personalise your computer.

Original parts books, workshop manuals and handbooks for Land Rovers and Range Rovers have always been greatly sought after, and rightly so: nothing compares, for example, to a Land Rover workshop manual compiled by the car's manufacturer. Now owners and enthusiasts have the opportunity to effortlessly collect all the original publications for their favourite Land Rover or Range Rover, on one handy and cost-effective DVD.

Product Features
> Printable - print only the pages you need. (Windows only)
> Searchable - search the entire section in seconds.
> Zoom - zoom in to see the exact details.
> Bookmarked - manuals are bookmarked to quickly locate sections.

System Requirements
PC Windows 2000 or later; DVD Reader, PDC viewer; must have administration rights to allow installation.
Mac OS X Mac OS X 10.4 or above. For OS X 10.6 (Snow Leopard) DVD Reader, PDC viewer
Important - Documents are viewable but not printable through Mac OSX. To print using a Mac you must be running a Windows installation e.g. using PC emulation software
Series Land RoversSeries Land Rovers
Model specific books for Series Land Rovers from 1948 Series 1 to the last of the Series 3 in 1984
Defender including 90, 110, 127 &130Defender including 90, 110, 127 &130
Model specific books covering Defender from 1983 upto the latest production. Includes workshop manuals, parts books, owners manuals, etc
Range Rover ClassicRange Rover Classic
Model specific technical publications for the Range Rover Classic from 1970 to 1995. Includes workshop manuals, parts books, electrical manuals and owners manuals.
Discovery Series 1, 1989 to 1999Discovery Series 1, 1989 to 1999
Model specific technical publications for the Discovery from 1989 to 1999. Includes workshop manuals, parts books, electrical manuals and owners manuals.
Range Rover 38A 1995 to 2002Range Rover 38A 1995 to 2002
Model specific rechnical publications for the Range Rover Second Generation 1995 to 2002. Includes workshop manuals, parts books and owners manuals.
FreelanderFreelander
Model specific technical publications for the Freelander from 1997. Includes workshop manuals, parts books, electrical manuals and owners manuals.
Discovery Series II 1999 onwardsDiscovery Series II 1999 onwards
Range Rover 3 (L322)Range Rover 3 (L322)
Range Rover 3rd generation from 2002 onwards
Other Technical TitlesOther Technical Titles
Technical manuals that are not model specific
History, Expedition and General Interest TitlesHistory, Expedition and General Interest Titles
All those Land Rover books that don't fall under the headings above
Digital Dispensary > BOOKS and Publications

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Shackle Plate Rear

Shackle Plate Rear

11.16

Application: Series1 1948 to 1953.

Description: Shackle plate for rear springs with plain 9/16" diameter holes.

Approximate dimensions: Length 113mm(4.45"), width 38mm(1.5"), thickness 9.2mm(0.36")
find out more

Shackle Plate Rear

Shackle Plate Rear

13.02

Application: Series 1 1948 to 1953.

Description: Shackle plate for rear springs with 1/2"BSF threaded holes.

Approximate dimensions: Length 113mm(4.45"), width 38mm(1.5"), thickness 9.2mm(0.36")

find out more

Clip for 3/16" Brake Pipe

Clip for 3/16

1.39

Application: Series1, Series2/2A and Series3 models.

Description: Reproduction stainless steel clip for brake pipes. Intended for 3/16" pipe, but will work with 1/4" diameter pipe also.

Approximate dimensions: Length 20mm(0.8"), width 10mm(3/8"), height 5mm(0.2"), hole diameter 4mm(0.16").

find out more

Rear End-plate for Cylinder Head

Rear End-plate for Cylinder Head

97.66

Application: Series 1 petrol models 1948 to 1958, Series 2 models with 2 litre petrol engine.

Description: Reproduction end plate in cast aluminium with mounting aperature for thermo switch.

Approximate dimensions: Length 91mm(3.6"), height 84mm(3.3"), depth 18.4mm(0.72")

find out more

Thermo Switch Series 1

Thermo Switch Series 1

80.92

Application: Series 1 petrol engines from 1948 to 1958.

Description: Reproduction switch for choke warning lamp. Supplied with mounting screws and lock washers.

Approximate dimensions: Length 64mm(2.52"), height 39.6mm(1.56"), depth including terminal 33mm(1.3")

find out more

Gaskets and Fitting Kit

Gaskets and Fitting Kit

9.26

Application: Series2A and Series3 models with 2.25litre petrol engine.

Description: Kit containing gaskets, studs and nuts for fitting of new exhaust manifold.

find out more

Exhaust Manifold

Exhaust Manifold

50.63

Application: Series2A and Series3 models with 2.25 petrol engine.

Description: Reproduction cast iron exhaust manifold

find out more

Coupling Repair Kit for MT82 Gearbox

Coupling Repair Kit for MT82 Gearbox

179.50

Application: Defender models 2007 to end of production;

Description: Kit to repace coupling shaft between MT82 gearbox and LT230 transfer box. Kit includes shaft, collar, bolt, 2 seals, spring ring, high temperature grease sachet and retaining clip.

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -