Digital Dispensary

Product Sections


Best Sellers

Grommet - Brake Pipe Support

Grommet - Brake Pipe Support

0.31

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Grommet to support brake pipe on rear axle casing. Used with clip 56666.
Approximate dimensions: overall length 21.5mm(0.85"), inside diameter 7mm(0.3"), outside diameter 14.5mm(0.6")
find out more

Clip for brake pipe grommet

Clip for brake pipe grommet

0.61

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Clip for brake pipe support grommet 6860L. Used on rear axle casing on all Series models from 1954 to 1984.
Approximate dimensions: 11mm(7/16") wide, 34mm(1.3") long, mounting hole 5mm(0.2") diameter, internal diameter of clip when closed 13mm.
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Gasket Set for Series Gearboxes

Gasket Set for Series Gearboxes

4.20

Application: Series 1, Series 2 & 3 with 4 or 6 cylinder engines.
Description: Set of replacement gaskets for main and transfer gearboxes. Does NOT include seals.
find out more

Water Pump Series1 Petrol

Water Pump Series1 Petrol

51.00

Application: Series 1 1.6ltr & 2.0ltr petrol (gasolene) engines.

Description: Reproduction cast iron water pump, supplied with gaskets.
find out more

Gaiter for High/Low Gear Lever

Gaiter for High/Low Gear Lever

2.46

Application: Series 1, Series 2/2A and Series 3.

Description: Reproduction rubber gaiter for the high/low gear lever.

Approximate dimensions: Overall length 143mm, height 90mm.

find out more

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

13.70

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Copper Ring Water Pump to Thermostat Housing

Copper Ring Water Pump to Thermostat Housing

7.44

Application: Series One with 1.6 or 2 litre petrol engine. Series Two with 2 litre petrol engine.
Description: Copper ring to support 'O' ring between water pump and thermostat housing.
Approximate dimensions: outside diameter 16mm(0.63"), inside diameter 11mm(0.43"), height 7.5mm(0.3")
find out more

Wheel Stud for Series 1

Wheel Stud for Series 1

5.82

Application: All Series One models.

Description: Reproduction wheel stud for Series 1. Threaded 9/16"BSF. Use with nut 217361.

Approximate dimensions: Overall length 52mm(2"), short threaded end 12mm(0.47"), long threaded end 27.5mm(1.08"), land 12.5mm(0.5")

find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > LAND Rover Series One Parts > Land Rover Series One Axles and Transmission Parts
Page:   <<   <  6  7   >   >>
Gasket Swivel Housing to Axle Tube Ref: 232413
Application: Series 1, 2 & 3 front axles.
Description: Replacement paper gasket for swivel housing to front axle tube.
Approximate dimensions: overall diameter 12.8cm (5")

Price: 0.15 (0.18 Including VAT at 20%)




People who bought this item also bought:
1. Oil Seal Differential Pinion (Ref: FRC4586)
2. Hub Bearing Rear (Ref: 270604)
3. Wheel Stud for Series 1 (Ref: 217360)
Gasket Swivel Housing to Axle Tube
Swivel Housing Outer Seal Ref: RTC3528
Application: Series 1, 2 & 3 front axles.
Description: Genuine oil seal for swivel housings.
Approximate dimensions: Outside diameter 16.8cm (6.6"), thickness 14.7mm (0.58")
Original part number: 502406.

Price: 11.48 (13.78 Including VAT at 20%)




People who bought this item also bought:
1. Inner Wheel Hub Seal (Ref: RTC3510)
2. Filler Plug - Differential Housing (Ref: 533358)
3. Series 1 Workshop Manual (Ref: 4291)
Swivel Housing Outer Seal
Retainer Swivel Housing Oil Seal Ref: 235968D
Application: Series 1, 2 & 3.
Description: Reproduction pressed steel retainer for oil seal to swivel housing.
Approximate dimensions: outside diameter 203mm (8"), inside diameter 157mm (6.18").

Price: 1.84 (2.21 Including VAT at 20%)



Retainer Swivel Housing Oil Seal
Gaiter Kit for Swivel Housings Ref: 276954D
Application: Series 1, Series2, Series 2A and Series 3.

Description: Replacement pair of leather gaiters and fixing kit for the swivel housings on the front axle. Protect your swivel housings from road salt and other forms of corrosion.



Price: 15.85 (19.02 Including VAT at 20%)




People who bought this item also bought:
1. Clip for brake pipe grommet (Ref: 56666)
2. Clip for 3/16" Brake Pipe (Ref: 41379)
3. Genuine One Shot Swivel Housing Grease (Ref: STC3435)
Gaiter Kit for Swivel Housings
Locker for Stub Axle Ref: 277311D
Application: Series 1, 2 & 3.
Description: Replacement locker for stub axle and brake back plate to swivel housing and/or to rear axle tube.
Approximate dimensions: Hole centres 58mm (2.3"), hole diameter 10mm (3/8")

Price: 0.25 (0.30 Including VAT at 20%)




People who bought this item also bought:
1. Felt Seal Stub Shaft to Drive Flange (Ref: RTC3515)
2. Cap for Hub Flange (Ref: 219098)
3. Flange Gasket (Ref: 231505=)
Locker for Stub Axle
Gasket, front Stub Axle to Swivel Housing Ref: 277289
Application: Series 1, Series 2 and Series 3.
Description: Gasket between front stub axle and swivel housing.
Approximate dimensions: outside diameter 140mm (5.5"), inside diameter 93mm (3.66").

Price: 0.25 (0.30 Including VAT at 20%)



Gasket, front Stub Axle to Swivel Housing
Felt Seal Stub Shaft to Drive Flange Ref: RTC3515
Application: Series 1 front axles, Series 2 front and rear axles, Series 3 SWB front and rear axles.
Description: Felt seal for 10 spline axle shafts to outer drive flanges.
Original part number 272086

Price: 0.40 (0.48 Including VAT at 20%)




People who bought this item also bought:
1. Locker for Stub Axle (Ref: 277311D)
2. Inner Wheel Hub Seal (Ref: RTC3510)
3. Locker for Hub Nuts (Ref: 217353=)
Felt Seal Stub Shaft to Drive Flange
Inner Wheel Hub Seal Ref: RTC3510
Application: Series 1 front axles, Series 2 & Series 3 to 1980.
Description: Inner hub oil seal made by Corteco/Gaco.
Approximate dimensions: outside diameter 85mm (3.35"), thickness 7.8mm (0.3").
Original part number 239422.

Price: 3.57 (4.28 Including VAT at 20%)




People who bought this item also bought:
1. Locker for Hub Nuts (Ref: 217353=)
2. Flange Gasket (Ref: 231505=)
3. Felt Seal Stub Shaft to Drive Flange (Ref: RTC3515)
Inner Wheel Hub Seal
Inner Hub Bearing NTN Ref: RTC3416N
Application: Series 1 front hubs, Series 2 & 2A front and rear hubs, Series 3 front and rear hubs to 1980.
Description: Inner wheel hub bearing. NTN (Japanese) taper roller bearing 359S/354X.
Approximate dimensions: outside diameter 85mm (3.35"), inside diameter 46mm (1.8").
Original part number 217269

Price: 18.59 (22.31 Including VAT at 20%)



Inner Hub Bearing NTN
Outer Hub Bearing NTN Ref: RTC3426N
Application: Series 1 front hubs, Series 2 & 2A front and rear hubs, Series 3 front and rear hubs to 1980.
Description: Outer wheel hub bearing. NTN (Japanese) taper roller bearing 11162/11300.
Approximate dimensions: outside diameter 76.5mm (3.0"), inside diameter 41.2mm (1.62").
Original part number 217270

Price: 10.80 (12.96 Including VAT at 20%)



Outer Hub Bearing NTN
Digital Dispensary > LAND Rover Series One Parts > Land Rover Series One Axles and Transmission Parts
Page:   <<   <  6  7   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Steering Arm - Series 1

Steering Arm - Series 1

17.82

Application: Series 1 models 1948 to 1956 approx.

Description: Drop arm for early type steering box. This arm is held in place with a pinch bolt.

Approximate dimensions: Overall length 17.4cm(6.9")

find out more

'D' Washer - Pedal Shaft

'D' Washer - Pedal Shaft

0.96

Application: Series 1 models.

Description: 'D' washer for support shaft for brake and clutch pedals.

Approximate dimensions: Outside diameter 38mm(1.5"), thickness 3mm(1/8").


find out more

Fixing Kit for Manifolds - Metric

Fixing Kit for Manifolds - Metric

12.83

Application: Series 3 from 1980 with 2.25 litre petrol engine.

Description: Metric threaded kit of fixings to hold manifolds to cylinder head. Kit includes 6 bolts, 2 set screws, 3 studs, 9 plain washers, 11 lock washers, 3 nuts, 2 clamps and 2 lockers

find out more

Fixing Kit for Manifolds - Imperial

Fixing Kit for Manifolds - Imperial

10.20

Application: Series 2 and Series 3 to approx 1980 with 2.25 litre petrol engine.

Description: Imperial (inch) threaded kit of fixings to hold manifolds to cylinder head. Kit includes 6 bolts, 2 set screws, 3 studs, 9 plain washers, 11 lock washers, 3 nuts, 2 clamps and 2 lockers

find out more

Shackle Plate Rear

Shackle Plate Rear

11.16

Application: Series1 1948 to 1953.

Description: Shackle plate for rear springs with plain 9/16" diameter holes.

Approximate dimensions: Length 113mm(4.45"), width 38mm(1.5"), thickness 9.2mm(0.36")
find out more

Shackle Plate Rear

Shackle Plate Rear

13.02

Application: Series 1 1948 to 1953.

Description: Shackle plate for rear springs with 1/2"BSF threaded holes.

Approximate dimensions: Length 113mm(4.45"), width 38mm(1.5"), thickness 9.2mm(0.36")

find out more

Clip for 3/16" Brake Pipe

Clip for 3/16

1.39

Application: Series1, Series2/2A and Series3 models.

Description: Reproduction stainless steel clip for brake pipes. Intended for 3/16" pipe, but will work with 1/4" diameter pipe also.

Approximate dimensions: Length 20mm(0.8"), width 10mm(3/8"), height 5mm(0.2"), hole diameter 4mm(0.16").

find out more

Rear End-plate for Cylinder Head

Rear End-plate for Cylinder Head

97.66

Application: Series 1 petrol models 1948 to 1958, Series 2 models with 2 litre petrol engine.

Description: Reproduction end plate in cast aluminium with mounting aperature for thermo switch.

Approximate dimensions: Length 91mm(3.6"), height 84mm(3.3"), depth 18.4mm(0.72")

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -