Digital Dispensary

Product Sections


Best Sellers

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

13.70

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Diaphragm Kit for Solex 32PBI-2

Diaphragm Kit for Solex 32PBI-2

18.80

Application: Series 1 1600cc & 2.0ltr petrol (gasolene).

Description: Diaphragm kit for accelerator pump

find out more

Contact Breakers Lucas 25D

Contact Breakers Lucas 25D

4.13

Application: Lucas 25D 4cylinder distributor as fitted to Series 2A and early Series 3 petrol engines, also used on late Series 1 engines with the DM2 distributor.

Description: Lucas boxed contact breaker set also known as 'points'.

Original part number 269987.

find out more

Flexible Fuel Pipe

Flexible Fuel Pipe

39.06

Application: Series I models with petrol engines.

Description: Reproduction flexible fuel pipe with one male end and one female end. Runs from fuel pipe towards carburettor. Now with ethanol proof lining!

Approximate dimensions: Overall length 39cm(15.3")

find out more

Axle Set of Brake Shoes - 10"

Axle Set of Brake Shoes - 10

33.94

Axle set of 4 10inch brake shoes by Mintex plus 4x pull-off springs, 6x imperial brake drum screws, 2x metric brake drum screws, 2 locking plates and 4 screws for anchor plates.

Application: Series1 80", 86" & 88" front and rear axles, Series 2/2A SWB front and rear, Series3 SWB front and rear to June 1980, Series3 SWB rear only from July 1980, Defender 90 rear to 1994.

Previous part numbers for shoes: RTC3411, GBS728, 505675, 505676
find out more

Replacement Condensor for Lucas 25D

Replacement Condensor for Lucas 25D

2.68

Application: Lucas 25D 4cylinder distributor as fitted to Series 2A and early Series 3 petrol engines.Also used on late Series 1 engines.

Description: No longer Lucas boxed condensor as the Lucas ones have a different connector on lead now that makes fixing ackward. So now sourcing from good after market source to original style of Lucas unit!

Approximate dimensions: overall diameter 17mm (0.67 inches), lead 57mm (2.24 inches).

Original part numbers 269988, 245007. DCB101, GSC101

find out more

Copper Ring Water Pump to Thermostat Housing

Copper Ring Water Pump to Thermostat Housing

7.44

Application: Series One with 1.6 or 2 litre petrol engine. Series Two with 2 litre petrol engine.
Description: Copper ring to support 'O' ring between water pump and thermostat housing.
Approximate dimensions: outside diameter 16mm(0.63"), inside diameter 11mm(0.43"), height 7.5mm(0.3")
find out more

Spark Plug Champion N5C

Spark Plug Champion N5C

2.14

Application: Series 2A and Series 3 4 cylinder engines with 7:1 compression ratio and all 6 cylinder Series engines. Also applicable to Series 1 engines.
Description: Champion N5C spark plug, original equipment.
Supersession of Series 1 part number 262796.
find out more

Felt Seal for Series 1 Pedals

Felt Seal for Series 1 Pedals

3.91

Application: Series 1 brake and clutch pedals.
Description: felt seal for brake and clutch pedals. Used with grommet 70620.
Approximate dimensions: 60mm (2.4") long, 44mm (1.7") wide, 15mm (0.6") deep.
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > LAND Rover Series One Parts > Land Rover Series One Axles and Transmission Parts
Page:   <<   <  1  2  3  4  5  ...   >   >>
Diff Pinion Bearing, Inner Ref: 219544
Application: Series 1 and Series 2 to suffix A chassis numbers.

Description: Taper roller bearing on inner end of pinion gear of differential. Equivalent to Timken bearings 3490/3420.

Approximate dimensions: Outside diameter 3.125"(79.4mm), inside diameter 1.5"(38.1mm), depth 1.25"(32mm)

Price: 38.00 (45.60 Including VAT at 20%)



Diff Pinion Bearing, Inner
Bearing, Differential Support Ref: 41045
Application: Series 1, Series 2 and Series 3 to suffix 'G' chassis number with Rover type differentials.

Description: Taper roller bearing used in pairs to support axle differential. Bearing is numbered 2729/2788.

Approximate dimensions: outside diameter 3" (76.4mm), inside diameter 1.5"(38mm).

Price: 15.00 (18.00 Including VAT at 20%)




People who bought this item also bought:
1. Axle Set of Brake Shoes - 10" (Ref: STC2796DKIT)
2. Rear Shock Absorber (Ref: RTC4232D)
3. Felt Seal Stub Shaft to Drive Flange (Ref: RTC3515)
Bearing, Differential Support
Cross-shaft for Differential Ref: 539703
Application: Series 1 differentials and Series2A Rover type differentials.
Description: Cross-shaft for differential gears.
Approximate dimensions: overall length 123mm (4.85"), diameter 15.5mm (0.61").
Original part number 11378.

Price: 6.00 (7.20 Including VAT at 20%)



Cross-shaft for Differential
Thrust Washer for Diff Wheels 0.040" Ref: 533786
Application: Series 1 differentials and Series2A Rover type differentials.
Description: Fibre thrust washer for differential wheels.
Approximate dimensions: outside diameter 69mm (2.72"), inside diameter 40mm (1.57"), thickness 1mm (0.040")
Original part number 07902.

Price: 2.05 (2.46 Including VAT at 20%)




People who bought this item also bought:
1. Thrust Washer for Diff Wheels 0.050" (Ref: 533788)
2. Replacement Universal Joint Kit (Ref: RTC3291=)
3. Gasket for Differential to Axle Casing (Ref: 7316)
Thrust Washer for Diff Wheels 0.040
Thrust Washer for Diff Wheels 0.045" Ref: 533787
Application: Series 1 differentials and Series2A Rover type differentials.
Description: Fibre thrust washer for differential wheels.
Approximate dimensions: outside diameter 69mm (2.72"), inside diameter 40mm (1.57"), thickness 1.15mm (0.045")
Original part number 07904.

Temporarily out of stock.

Price: 2.26 (2.71 Including VAT at 20%)


Thrust Washer for Diff Wheels 0.045
Thrust Washer for Diff Wheels 0.050" Ref: 533788
Application: Series 1 differentials and Series2A Rover type differentials.
Description: Fibre thrust washer for differential wheels.
Approximate dimensions: outside diameter 69mm (2.72"), inside diameter 40mm (1.57"), thickness 1.3mm (0.050")
Original part number 50139.

Price: 3.09 (3.71 Including VAT at 20%)




People who bought this item also bought:
1. Thrust Washer for Diff Wheels 0.040" (Ref: 533786)
2. Gasket for Differential to Axle Casing (Ref: 7316)
3. Bearing First Motion Shaft (Ref: 6397)
Thrust Washer for Diff Wheels 0.050
Shim for Inner bearing of Diff Pinion, 0.003" Ref: 230438
Application: Series 1 and Series 2 differentials.
Description: 0.003" shim for setting position of differntial pinion and bearing pre-load.
Approximate dimensions: outside diameter 78.6mm (3.09"), inside diameter 67mm (2.64").

Price: 2.73 (3.28 Including VAT at 20%)



Shim for Inner bearing of Diff Pinion, 0.003
Shim for Inner Bearing of Diff Pinion, 0.005" Ref: 230439
Application: Series 1 and Series 2 differentials.
Description: 0.005" shim for setting position of differntial pinion and bearing pre-load.
Approximate dimensions: outside diameter 78.6mm (3.09"), inside diameter 67mm (2.64").

Price: 1.20 (1.44 Including VAT at 20%)




People who bought this item also bought:
1. Axle Set of Brake Shoes - 10" (Ref: STC2796DKIT)
2. Rear Shock Absorber (Ref: RTC4232D)
3. Felt Seal Stub Shaft to Drive Flange (Ref: RTC3515)
Shim for Inner Bearing of Diff Pinion, 0.005
Oil Seal Differential Pinion Ref: FRC4586
Application: Series 1, 2 & 3 Rover type differentials.

Description: Oil seal to nose of differential. Corteco/Gaco boxed.

Approximate dimensions: outside diameter 70mm (2.76"), thickness 12.5mm (0.5").

Original part number: 217507.

Price: 4.34 (5.21 Including VAT at 20%)




People who bought this item also bought:
1. Axle Set of Brake Shoes - 10" (Ref: STC2796DKIT)
2. Rear Shock Absorber (Ref: RTC4232D)
3. Felt Seal Stub Shaft to Drive Flange (Ref: RTC3515)
Oil Seal Differential Pinion
Brass Gasket Differential Nose Ref: 553412=
Application: Series 1 and Series 2 differentials.
Description: Brass gasket/shim for nose peice of differentials. 0.2mm (0.008") thick
Original part number 233473.

Price: 10.08 (12.10 Including VAT at 20%)



Brass Gasket Differential Nose
Digital Dispensary > LAND Rover Series One Parts > Land Rover Series One Axles and Transmission Parts
Page:   <<   <  1  2  3  4  5  ...   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Alignment Pins

Alignment Pins

53.27

Application: Freelander 2 and Evoque.

Description: Pair of pins for aligning front subrame to bodyshell.

Approximate dimensions: Overall length 168mm(6.6"), pin diameter 20mm(0.8")

find out more

Rear Lens Right Hand

Rear Lens Right Hand

47.04

Application: Range Rover Classic.

Description: Reproduction rear lamp lens with fog guard.

Approximate dimensions: Height 22.8cm(9"), width 14.3cm(5.6"), thickness 1.8cm(0.7")

find out more

Clamp for Disributor

Clamp for Disributor

18.60

Application: Series 1, Series 2 and Series 3 petrol models.

Description: Clamp for retaining distributor.

Approximate dimensions: Internal diameter 36mm(1.4"), thickness 3mm(0.12")

find out more

6 Way Junction Box

6 Way Junction Box

22.80

Application: All Series 1 models.

Description: Reproduction 6 way junction box.

Approximate dimensions: Overal diameter 54mm(2.1"), height 37.5mm(1.5")

find out more

Fuse Box Series 1

Fuse Box Series 1

34.54

Application: All Series 1 models.

Description: Reproduction 1 way fuse box, needs glass fuse.

Approximate dimensions: Length 54mm(2.1"), width 33mm(1.3"), height 45mm(1.9")

find out more

TDC Alignment Plate

TDC Alignment Plate

120.43

Application: 2.0 I4 MID DOHC AJ200 engine as used in Evoque and Freelander 2.

Description: Alignment plate for setting Top Dead Centre for this engine.

Approximate dimensions: 25cm(9.8"), x 20cm(7.9") x 0.8cm(0.31")

find out more

Thrust Bearing Assembly

Thrust Bearing Assembly

27.90

Application: Fairey overdrive for LT76 gearbox.

Description: Thrust bearing assembly for input shaft. Chamfered plate to clear radius on shaft step.

Approximate dimensions: Overall diameter 1-7/8"(47.6mm), inside diameter 30.8mm(1.21"), thickness of assembly 6mm(0.24")

find out more

Aligner for Balance Shaft

Aligner for Balance Shaft

78.14

Application: 2.0 I4 MID DOHC AJ200 engine as used in Evoque and Freelander 2.

Description: ool for aligning the balance shaft of this engine.

Approximate dimensions: Overall length 84mm(3.3"), flange diameter 70mm(2.75"), body diameter 44mm(1.73").

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -