Digital Dispensary

Product Sections


Best Sellers

Clip for brake pipe grommet

Clip for brake pipe grommet

0.61

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Clip for brake pipe support grommet 6860L. Used on rear axle casing on all Series models from 1954 to 1984.
Approximate dimensions: 11mm(7/16") wide, 34mm(1.3") long, mounting hole 5mm(0.2") diameter, internal diameter of clip when closed 13mm.
find out more

Grommet - Brake Pipe Support

Grommet - Brake Pipe Support

0.31

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Grommet to support brake pipe on rear axle casing. Used with clip 56666.
Approximate dimensions: overall length 21.5mm(0.85"), inside diameter 7mm(0.3"), outside diameter 14.5mm(0.6")
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Copper Ring Water Pump to Thermostat Housing

Copper Ring Water Pump to Thermostat Housing

7.44

Application: Series One with 1.6 or 2 litre petrol engine. Series Two with 2 litre petrol engine.
Description: Copper ring to support 'O' ring between water pump and thermostat housing.
Approximate dimensions: outside diameter 16mm(0.63"), inside diameter 11mm(0.43"), height 7.5mm(0.3")
find out more

Replacement Universal Joint Kit

Replacement Universal Joint Kit

11.93

Application: Series 1 and Series 2/2A to approximately 1964.
Description: Universal joint repair kit including 4 circlips and a grease nipple.
Approximate Dimensions: Distance across faces of joint 75mm (2.95"), cap diameter 27mm (1.06"), cap length including seal 17mm ( 0.67").
Original part number 43023.
find out more

Dust Cap for Bleed Screw

Dust Cap for Bleed Screw

0.30

Application: Suitable for all bleed screws.
Description: Soft plastic dust cap for bleed screws.
Approximate dimensions: length 15mm(0.6"), diameter 8mm (0.3")
Original part number 234957
find out more

Lockheed Delphi Wheel Cylinder S1, S2a & S3

Lockheed Delphi Wheel Cylinder S1, S2a & S3

18.00

Application: Front right hand cylinder on SWB models to 1980, rear RH wheel cylinder on SWB models fron 1980 onwards. Rear RH wheel cylinder on all 109 models.
Description: Brake wheel cylinder for use with 10 inch brake drums. Bore diameter 1.25".
Approximate dimensions: Length 83mm (3.3"), bore diameter 31.8mm (1.25"), mounting stud centres 42mm (1.65").
find out more

Reservoir for S1 Brakes

Reservoir for S1 Brakes

38.88

Application: Series One 1948 to 1958.

Description: Reproduction steel brake fluid reservoir supplied with steel cap.

Approximate dimensions: Overall length 145mm(5.7"), overall diameter 68.5mm(2.7")

Back in stock.
find out more

Lockheed Delphi Wheel Cylinder S1, S2A & S3

Lockheed Delphi Wheel Cylinder S1, S2A & S3

18.00

Application: 88 inch wheel base rear right hand to 1980. Used in 10 inch drums.

Description: Cast iron wheel cylinder by Lockheed Delphi. Internal bore 25mm (1 inch), length 84mm (3.3 ionches). NB on early vehicles this cylinder was used on the left hand rear drum.

find out more

These Superb Prices are ONLY available when you order ON-LINE

Dingo Data

DINGOCROFT is a small, specialist family company born of the parent company, Penn Rental Service Ltd, which used to hire out mobile loos. (see Prancer's Previous )

We thought you might like to know a bit about our philosophy, aims and business practices.

  Dingocroft operates in a strong market with a lot of competition. We succeed because we offer a dedicated service.
  Dingocroft carries an enormous range of parts for all Land Rover models including Freelander 2 and North American Spec. vehicles at competitive prices.
  Dingocroft has an unusual depth and breadth of stock for the older vehicles. Our archives start from 1948 and cover all mainstream models plus most of the backwater ones too!
  Our current stockholding amounts to over 12,000 separate lines with a retail value in excess of £500,000. These lines of course include mechanical parts, service items, body panels, chassis parts, glasses [vehicular and the alcohol containing ones], electrical parts and also accessories, off-road equipment, special tools, manuals, parts catalogues, books, models [for adults and kids], in fact just about anything Land Rover.
  At Dingocroft we work from the manufacturers [ i.e. Land Rover’s ] parts catalogues and we can therefore offer the full range of parts from Land Rover. We also source parts from many other suppliers to offer you choices and parts that may otherwise be unobtainable.
  There are now in excess of 65,000 part numbers from Land Rover and this number is growing rapidly with new models, up grades, etc. We do not even attempt to produce a full catalogue of our own.
  Instead we offer a personal quotation service with prices guaranteed for four weeks. Also we can supply genuine factory parts books for nearly all models..
  Genuine and original equipment sourced stock is our main and preferred business. However, for some popular applications [particularly in the case of older vehicles] alternative good quality, but more economic options, are also offered.
  All parts are made available to you via a personal quotation service with prices guaranteed for four weeks from the date of the quote.
  We at Dingocroft are very anxious that all our customers get exactly what they need first time. However, since we are only human, the odd mistake does occur. But fear not, any part can be returned to us for credit or replacement provided it is unused, clean and in its original packing whether the error is ours or yours. Whilst we reserve the right to charge a handling fee it is seldom imposed.
  Despite our large stock holding we are sometimes caught out. However non-stock items can be rapidly sourced, usually within 24hrs and normally without loss of discount.

How to Order

We do now offer shopping trolley sales on a large range of products, go to Our Shops Gateway page for further information.
For all other items, please make a note of the products you are interested in (whether they are listed on the website or not) and send us a message via Dingo Direct Discourse. Please let us have as much information as possible on your vehicle to help us identify the correct parts.
 We will then produce a quotation for you including carriage charges if appropriate. For your security and to keep credit card charges down, we ask that you fax or telephone us your credit card details once you are  ready to order.

Hours of Business

Weekdays we are open from 8.30am to 6.00pm with full staff and delivery service. We now offer late night shopping on Thursdays until 8:00pm

We are closed on all UK National holidays.


Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Alignment Pins

Alignment Pins

53.27

Application: Freelander 2 and Evoque.

Description: Pair of pins for aligning front subrame to bodyshell.

Approximate dimensions: Overall length 168mm(6.6"), pin diameter 20mm(0.8")

find out more

Rear Lens Right Hand

Rear Lens Right Hand

47.04

Application: Range Rover Classic.

Description: Reproduction rear lamp lens with fog guard.

Approximate dimensions: Height 22.8cm(9"), width 14.3cm(5.6"), thickness 1.8cm(0.7")

find out more

Clamp for Disributor

Clamp for Disributor

18.60

Application: Series 1, Series 2 and Series 3 petrol models.

Description: Clamp for retaining distributor.

Approximate dimensions: Internal diameter 36mm(1.4"), thickness 3mm(0.12")

find out more

6 Way Junction Box

6 Way Junction Box

22.80

Application: All Series 1 models.

Description: Reproduction 6 way junction box.

Approximate dimensions: Overal diameter 54mm(2.1"), height 37.5mm(1.5")

find out more

Fuse Box Series 1

Fuse Box Series 1

34.54

Application: All Series 1 models.

Description: Reproduction 1 way fuse box, needs glass fuse.

Approximate dimensions: Length 54mm(2.1"), width 33mm(1.3"), height 45mm(1.9")

find out more

TDC Alignment Plate

TDC Alignment Plate

120.43

Application: 2.0 I4 MID DOHC AJ200 engine as used in Evoque and Freelander 2.

Description: Alignment plate for setting Top Dead Centre for this engine.

Approximate dimensions: 25cm(9.8"), x 20cm(7.9") x 0.8cm(0.31")

find out more

Thrust Bearing Assembly

Thrust Bearing Assembly

27.90

Application: Fairey overdrive for LT76 gearbox.

Description: Thrust bearing assembly for input shaft. Chamfered plate to clear radius on shaft step.

Approximate dimensions: Overall diameter 1-7/8"(47.6mm), inside diameter 30.8mm(1.21"), thickness of assembly 6mm(0.24")

find out more

Aligner for Balance Shaft

Aligner for Balance Shaft

78.14

Application: 2.0 I4 MID DOHC AJ200 engine as used in Evoque and Freelander 2.

Description: ool for aligning the balance shaft of this engine.

Approximate dimensions: Overall length 84mm(3.3"), flange diameter 70mm(2.75"), body diameter 44mm(1.73").

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -