Digital Dispensary

Product Sections


Best Sellers

Grommet - Brake Pipe Support

Grommet - Brake Pipe Support

0.31

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Grommet to support brake pipe on rear axle casing. Used with clip 56666.
Approximate dimensions: overall length 21.5mm(0.85"), inside diameter 7mm(0.3"), outside diameter 14.5mm(0.6")
find out more

Clip for brake pipe grommet

Clip for brake pipe grommet

0.61

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Clip for brake pipe support grommet 6860L. Used on rear axle casing on all Series models from 1954 to 1984.
Approximate dimensions: 11mm(7/16") wide, 34mm(1.3") long, mounting hole 5mm(0.2") diameter, internal diameter of clip when closed 13mm.
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Gasket Set for Series Gearboxes

Gasket Set for Series Gearboxes

4.20

Application: Series 1, Series 2 & 3 with 4 or 6 cylinder engines.
Description: Set of replacement gaskets for main and transfer gearboxes. Does NOT include seals.
find out more

Water Pump Series1 Petrol

Water Pump Series1 Petrol

51.00

Application: Series 1 1.6ltr & 2.0ltr petrol (gasolene) engines.

Description: Reproduction cast iron water pump, supplied with gaskets.
find out more

Gaiter for High/Low Gear Lever

Gaiter for High/Low Gear Lever

2.46

Application: Series 1, Series 2/2A and Series 3.

Description: Reproduction rubber gaiter for the high/low gear lever.

Approximate dimensions: Overall length 143mm, height 90mm.

find out more

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

13.70

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Copper Ring Water Pump to Thermostat Housing

Copper Ring Water Pump to Thermostat Housing

7.44

Application: Series One with 1.6 or 2 litre petrol engine. Series Two with 2 litre petrol engine.
Description: Copper ring to support 'O' ring between water pump and thermostat housing.
Approximate dimensions: outside diameter 16mm(0.63"), inside diameter 11mm(0.43"), height 7.5mm(0.3")
find out more

Wheel Stud for Series 1

Wheel Stud for Series 1

5.82

Application: All Series One models.

Description: Reproduction wheel stud for Series 1. Threaded 9/16"BSF. Use with nut 217361.

Approximate dimensions: Overall length 52mm(2"), short threaded end 12mm(0.47"), long threaded end 27.5mm(1.08"), land 12.5mm(0.5")

find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > LAND Rover Series One Parts > Land Rover Series One Brake Parts
Page:   <<   <  1  2  3  4  5  ...   >   >>
Lockheed Delphi Wheel Cylinder S1, S2A & S3 Ref: 243303D
Application: 88 inch wheel base rear left hand to 1980. Used in 10 inch drums.

Description: Cast iron wheel cylinder by Lockheed Delphi. Internal bore 25mm (1 inch), length 84mm (3.3 ionches). NB on early vehicles this cylinder was used on the right hand rear drum.

Price: 15.00 (18.00 Including VAT at 20%)




People who bought this item also bought:
1. Lockheed Delphi Wheel Cylinder S1, S2A & S3 (Ref: 243302D)
2. Axle Set of Brake Shoes - 10" (Ref: STC2796DKIT)
3. Spark Plug Champion N12YC (Ref: RTC3570)
Lockheed Delphi Wheel Cylinder S1, S2A & S3
Replacement Seal Kit for Wheel Cylinders Ref: 266687
Application: Series 1, 2, & 3 with 1" diameter bore wheel cylinders as fitted to rear of 86" & 88" wheel base Land Rovers.
Description: Seal kit for pair of 1" diameter wheel cylinders. Kit contains 4 cup seals, 4 cylinder dust seals and 2 dust caps for bleed screws. Suits 243302 and 243303 wheel cylinders.

Please note that this is now a replacement kit as the Lockheed kit is no longer available.

Price: 2.50 (3.00 Including VAT at 20%)




People who bought this item also bought:
1. Seal Kit - front wheel cylinders (Ref: 275744)
2. Copper Ring Water Pump to Thermostat Housing (Ref: 9197)
3. Clip for 3/16" Brake Pipe (Ref: 41379)


Related products:
1. Cylinder Hones - Brakes (Ref: ZZLAS2243)
Replacement Seal Kit for Wheel Cylinders
Bleed Screw for Wheel Cylinders Ref: 556508
Application: Series 1, 2, & 3.
Description: Bleed screw with conical seat. Suits all Series wheel cylinders (and clutch slave cylinders) except original Series 1 cylinders which had a spherical seat.
Original part number 248909

Price: 0.50 (0.60 Including VAT at 20%)



Bleed Screw for Wheel Cylinders
Dust Cap for Bleed Screw Ref: 594091
Application: Suitable for all bleed screws.
Description: Soft plastic dust cap for bleed screws.
Approximate dimensions: length 15mm(0.6"), diameter 8mm (0.3")
Original part number 234957

Price: 0.25 (0.30 Including VAT at 20%)




People who bought this item also bought:
1. Clip for brake pipe grommet (Ref: 56666)
2. Grommet - Brake Pipe Support (Ref: 6860L)
3. Genuine One Shot Swivel Housing Grease (Ref: STC3435)
Dust Cap for Bleed Screw
Brake Hose Ref: 219824KIT
Application: Series One 1948 to 1953.

Description: Large diameter brake hose for early models with 1/4" diameter brake pipes. This hose has 7/16"UNF threaded ends. Supplied with copper washer, star washer and locking nut.

Overall length 38cm (15").

Price: 22.50 (27.00 Including VAT at 20%)




People who bought this item also bought:
1. Axle Breather (Ref: 515845=)
2. Castellated Nut (Ref: 3259)
3. Seal Axle Tube (Ref: 217400)
Brake Hose
Brake Hose Series 1, 2A & S3 Ref: RTC3386=
Application: Series 1 from 1954 to 1958, Series 2A 88" front and rear, Series 2A 109" front, Series 3 88" rear.

Description: Bearmach brand flexible brake hose, overall length 39.5cm (15.6"), thread 3/8UNF.

Price: 10.00 (12.00 Including VAT at 20%)




People who bought this item also bought:
1. Starter Switch (Ref: RTC4827)
2. Front Shock Absorber (Ref: RTC4230D)
3. Spark Plug Champion N5C (Ref: RTC3571)
Brake Hose Series 1, 2A & S3
Brass 'T' Piece for 1/4" Pipes Ref: ZZHU34
Brass T peice threaded 7/16"UNF to take male connectors. Similar to 219827 T peice on Series 1 80" models.

Approximate dimensions: 34mm(1.3") x 35.4mm(1.4") x 16mm(0.625")

Price: 9.64 (11.57 Including VAT at 20%)



Brass 'T' Piece for 1/4
Pair of Brake Hoses S2A & S3 Ref: RTC3386KIT
Application: Series 2A 88" front and rear, Series 2A 109" front.

Description: Pair of Bearmach flexible brake hoses with star washers, retaining nuts and copper sealing washers. Overall length of each hose 39.5cm (15.6"), thread 3/8UNF.

Price: 18.50 (22.20 Including VAT at 20%)




People who bought this item also bought:
1. Hydraulic Brake Light Switch (Ref: ZZ21B291)
2. Brake Master Cylinder - CB type. (Ref: 564706D)
3. Gasket Steering Box Side Plate (Ref: 515849)


Related products:
1. 1litre Bottle of Silicon Brake Fluid (Ref: ZZDYNSILIDOT5)
Pair of Brake Hoses S2A & S3
Tee Piece Ref: BTB657L
Application: Series 1 from 1954, Series 2/2A and Series 3 to 1980.
Description: Reproduction tee piece in brass to take 3x 3/16" brake pipes with 3/8"UNF threaded unions. Also with mounting hole.
Original part number 234928

Price: 9.64 (11.57 Including VAT at 20%)



Tee Piece
4-Way Brake Pipe Union Ref: 565719
Application: Series One from 1954 to 1958. Series 2/2A with mechanical brake light switch.
Description: Reproduction 4-way brake union in solid brass. Takes 4 3/16" brake pipes with 3/8"UNF 24TPI threads. Also has fixing hole.
Original part number 241690

Price: 14.80 (17.76 Including VAT at 20%)




People who bought this item also bought:
1. Grommet - Brake Pipe Support (Ref: 6860L)
2. Set of Rivets for Bonnet Strip (Ref: 68087x12)
3. Oil Seal Set for Gearbox (Ref: 600603KIT)
4-Way Brake Pipe Union
Digital Dispensary > LAND Rover Series One Parts > Land Rover Series One Brake Parts
Page:   <<   <  1  2  3  4  5  ...   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Steering Arm - Series 1

Steering Arm - Series 1

17.82

Application: Series 1 models 1948 to 1956 approx.

Description: Drop arm for early type steering box. This arm is held in place with a pinch bolt.

Approximate dimensions: Overall length 17.4cm(6.9")

find out more

'D' Washer - Pedal Shaft

'D' Washer - Pedal Shaft

0.96

Application: Series 1 models.

Description: 'D' washer for support shaft for brake and clutch pedals.

Approximate dimensions: Outside diameter 38mm(1.5"), thickness 3mm(1/8").


find out more

Fixing Kit for Manifolds - Metric

Fixing Kit for Manifolds - Metric

12.83

Application: Series 3 from 1980 with 2.25 litre petrol engine.

Description: Metric threaded kit of fixings to hold manifolds to cylinder head. Kit includes 6 bolts, 2 set screws, 3 studs, 9 plain washers, 11 lock washers, 3 nuts, 2 clamps and 2 lockers

find out more

Fixing Kit for Manifolds - Imperial

Fixing Kit for Manifolds - Imperial

10.20

Application: Series 2 and Series 3 to approx 1980 with 2.25 litre petrol engine.

Description: Imperial (inch) threaded kit of fixings to hold manifolds to cylinder head. Kit includes 6 bolts, 2 set screws, 3 studs, 9 plain washers, 11 lock washers, 3 nuts, 2 clamps and 2 lockers

find out more

Shackle Plate Rear

Shackle Plate Rear

11.16

Application: Series1 1948 to 1953.

Description: Shackle plate for rear springs with plain 9/16" diameter holes.

Approximate dimensions: Length 113mm(4.45"), width 38mm(1.5"), thickness 9.2mm(0.36")
find out more

Shackle Plate Rear

Shackle Plate Rear

13.02

Application: Series 1 1948 to 1953.

Description: Shackle plate for rear springs with 1/2"BSF threaded holes.

Approximate dimensions: Length 113mm(4.45"), width 38mm(1.5"), thickness 9.2mm(0.36")

find out more

Clip for 3/16" Brake Pipe

Clip for 3/16

1.39

Application: Series1, Series2/2A and Series3 models.

Description: Reproduction stainless steel clip for brake pipes. Intended for 3/16" pipe, but will work with 1/4" diameter pipe also.

Approximate dimensions: Length 20mm(0.8"), width 10mm(3/8"), height 5mm(0.2"), hole diameter 4mm(0.16").

find out more

Rear End-plate for Cylinder Head

Rear End-plate for Cylinder Head

97.66

Application: Series 1 petrol models 1948 to 1958, Series 2 models with 2 litre petrol engine.

Description: Reproduction end plate in cast aluminium with mounting aperature for thermo switch.

Approximate dimensions: Length 91mm(3.6"), height 84mm(3.3"), depth 18.4mm(0.72")

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -