Digital Dispensary

Product Sections


Best Sellers

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Gaiter for High/Low Gear Lever

Gaiter for High/Low Gear Lever

2.46

Application: Series 1, Series 2/2A and Series 3.

Description: Reproduction rubber gaiter for the high/low gear lever.

Approximate dimensions: Overall length 143mm, height 90mm.

find out more

Male Union for Vacuum Pipe

Male Union for Vacuum Pipe

3.25

Application: Series 1 and Series 2A.

Description: Brass male union for 1/8" copper pipe. Threaded to fit Solex 32PBI.

Aproximate dimensions: Length 10mm(0.39"), internal diameter 1/8"(3.2mm), hex 9mm(0.35") across flats, thread 1/4"BSF.

find out more

Sump Gasket Series 1

Sump Gasket Series 1

10.82

Application: Series 1 1600cc or 2000cc petrol (gasolene) engine.
Description: Original cork sump gasket, manufactured in the 1950's.
find out more

'O' Ring for Thermostat

'O' Ring for Thermostat

0.55

Application: Series 1, 2 & 3 4cylinder engines.
Description: 'O' ring for sealing thermostat to cylinder head.
Approximate dimensions: outside diameter 55mm (2.2").
Original part number 01645
find out more

Swivel Housing Outer Seal

Swivel Housing Outer Seal

13.78

Application: Series 1, 2 & 3 front axles.
Description: Genuine oil seal for swivel housings.
Approximate dimensions: Outside diameter 16.8cm (6.6"), thickness 14.7mm (0.58")
Original part number: 502406.
find out more

Grommet for vacuum pipe

Grommet for vacuum pipe

4.37

Application: Series 1 and Series 2A.

Description: Split rubber grommet for us with 214228 retaining clip. Used on 1/8" diameter copper vacuum pipe.

Approximate dimensions: Length 17mm(0.67"), internal diameter 3mm(1/8"), overall diameter 9mm(0.35")

find out more

Set of Rivets for Bonnet Strip

Set of Rivets for Bonnet Strip

10.22

Application: Series 1 and early Series 2A.

Description: Set of 12 bifurcated rivets in black for retaining the bonnet rest strip 300824A.

Approximate dimensions: Head diameter 9.5mm(3/8"), length 14mm(9/16"), shank diameter 4.8mm(3/16").

find out more

Series1, 2 & 3 Wheel Bearing Kit with Japanese Bearings

Series1,  2 & 3 Wheel Bearing Kit with Japanese Bearings

39.94

Application: Series 1 front axle only, Series 2, Series 2A and Series 3 to 1980. Where inner bearing is larger than outer bearing. Covers both long and short wheel base vehicles, suitable for either front or rear wheel.

Description: Kit of parts to service one wheel hub. Kit comprises inner and outer Japanese manufactured wheel bearings (NTN or similar brand), Gaco inner seal, flange gasket, hub nut locker, felt outer seal, 'o' ring outer seal and split pin.

find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > LAND Rover Series One Parts > Land Rover Series One Brake Parts
Page:  1  2  3  4  5  ...   >   >>
Brake Master Cylinder and Conversion Kit Ref: 235006D
Application: Series 1 80" 1948 to 1953 with 1/4" diameter brake pipes.

Desc ription: Replacement master cylinder modified to fit early Series 1 models. Outrigger requires an additional 5/16" diameter hole to be drilled to mount the 2 hole flange cylinder.

Price: 175.00 (210.00 Including VAT at 20%)




People who bought this item also bought:
1. Wiper Blade (Ref: 261504)
2. Gasket By-pass Hose Ends (Ref: 210419)
3. Yellow Knob - 4WD Gear lever (Ref: 232813)


Related products:
1. 1litre Bottle of Silicon Brake Fluid (Ref: ZZDYNSILIDOT5)
Brake Master Cylinder and Conversion Kit
Brake Master Cylinder and Conversion Kit Ref: 241687D
Application: Series 1 from 1954 to 1958 with 3/16" diameter brake pipes.

Description: Early Series 2 brake master cylinder and conversion kit to allow it to be fitted to Series 1.


Sorry, out of stock, should be available April 2019.

Price: 81.25 (97.50 Including VAT at 20%)




Related products:
1. 1litre Bottle of Silicon Brake Fluid (Ref: ZZDYNSILIDOT5)
Brake Master Cylinder and Conversion Kit
Seal Kit for Brake Master Cylinder Ref: ZZSP1975-5
Application: Series One from 1948 to 1958.
Description: Reproduction seal kit for brake master cylinder. Suits all short wheel base models. Not suitable for long wheel base models.
Original part number 278524

Price: 16.50 (19.80 Including VAT at 20%)




People who bought this item also bought:
1. Vacuum Advance Pipe (Ref: 214231)
2. Male Union for Vacuum Pipe (Ref: 260707)
3. Stud for Exhaust Manifold (Ref: 213472)


Related products:
1. Cylinder Hones - Brakes (Ref: ZZLAS2243)
2. 1litre Bottle of Silicon Brake Fluid (Ref: ZZDYNSILIDOT5)
Seal Kit for Brake Master Cylinder
Seal Kit for Brake Master Cylinder 107/109 Ref: 278523
Application: Series One 107 and 109 models with 11" brake drums.
Description: Reproduction seal kit for brake master cylinder on long wheel base models. Kit may not include metalwork - depending on availability. This kit is for 1" bore cylinders.

Price: 18.00 (21.60 Including VAT at 20%)





Related products:
1. 1litre Bottle of Silicon Brake Fluid (Ref: ZZDYNSILIDOT5)
2. Cylinder Hones - Brakes (Ref: ZZLAS2243)
Seal Kit for Brake Master Cylinder 107/109
Push Rod - Master Cylinder Ref: 516409
Application: Series 1 1954 to 1958 with 10" drums.

Description: Reproduction pushrod for brake master cylinder. With 3/8"UNF thread and kexagonal collar.

Approximate dimesions: overall length 12.1cm(4.76")



Price: 18.60 (22.32 Including VAT at 20%)



Push Rod - Master Cylinder
Reservoir for S1 Brakes Ref: 271581
Application: Series One 1948 to 1958.

Description: Reproduction steel brake fluid reservoir supplied with steel cap.

Approximate dimensions: Overall length 145mm(5.7"), overall diameter 68.5mm(2.7")

Back in stock.

Price: 32.40 (38.88 Including VAT at 20%)




People who bought this item also bought:
1. Rotor Arm (Ref: 261242)
2. Gasket By-pass Hose Ends (Ref: 210419)
3. Yellow Knob - 4WD Gear lever (Ref: 232813)


Related products:
1. 1litre Bottle of Silicon Brake Fluid (Ref: ZZDYNSILIDOT5)
Reservoir for S1 Brakes
Fixing Bolt Backplate to Front Swivel Housing Ref: 237339
Application: Series 1, 2 & 3.
Description: Set bolt 3/8"BSF x 1" long. For fixing front brake backplate to swivel housing. 6 bolts per backplate.

Price: 0.45 (0.54 Including VAT at 20%)




People who bought this item also bought:
1. Nut - Fuel Pipe (Ref: 2729)
2. Gasket Exhaust Manifold to Down Pipe (Ref: 213358)
3. Stud for Exhaust Manifold (Ref: 213472)
Fixing Bolt Backplate to Front Swivel Housing
Fixing Bolt Rear Backplate to Axle Tube Ref: 576521
Application: Series 1, 2 & 3.
Description: Bolt 38"BSF x 1 3/8" long. For fixing rear brake backplate to axle tube. 6 bolts per backplate

Price: 0.54 (0.65 Including VAT at 20%)




People who bought this item also bought:
1. Axle Set of Brake Shoes - 10" (Ref: STC2796DKIT)
2. Locker for Handbrake Adjuster (Ref: 542515)
3. Wheel Nut (Ref: 217361)
Fixing Bolt Rear Backplate to Axle Tube
Locker for Stub Axle Ref: 277311D
Application: Series 1, 2 & 3.
Description: Replacement locker for stub axle and brake back plate to swivel housing and/or to rear axle tube.
Approximate dimensions: Hole centres 58mm (2.3"), hole diameter 10mm (3/8")

Price: 0.25 (0.30 Including VAT at 20%)




People who bought this item also bought:
1. Wheel Nut (Ref: 217361)
2. Oil Seal Differential Pinion (Ref: FRC4586)
3. Bush for Narrow Springs (Ref: 230713)
Locker for Stub Axle
Seal Kit for 1 3/8" Wheel Cylinders Ref: ZZSP1224
Application: Series 1 models 1948 and 1949 for chassis numbers 860001 to 867720.

Descrition: Replacement seals for front wheel cyliders with bore of 1 3/8"(35mm). Kit has sufficient seals for both front wheel cylinders.


Price: 19.38 (23.26 Including VAT at 20%)



Seal Kit for 1 3/8
Digital Dispensary > LAND Rover Series One Parts > Land Rover Series One Brake Parts
Page:  1  2  3  4  5  ...   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Steering Arm - Series 1

Steering Arm - Series 1

17.82

Application: Series 1 models 1948 to 1956 approx.

Description: Drop arm for early type steering box. This arm is held in place with a pinch bolt.

Approximate dimensions: Overall length 17.4cm(6.9")

find out more

'D' Washer - Pedal Shaft

'D' Washer - Pedal Shaft

0.96

Application: Series 1 models.

Description: 'D' washer for support shaft for brake and clutch pedals.

Approximate dimensions: Outside diameter 38mm(1.5"), thickness 3mm(1/8").


find out more

Fixing Kit for Manifolds - Metric

Fixing Kit for Manifolds - Metric

12.83

Application: Series 3 from 1980 with 2.25 litre petrol engine.

Description: Metric threaded kit of fixings to hold manifolds to cylinder head. Kit includes 6 bolts, 2 set screws, 3 studs, 9 plain washers, 11 lock washers, 3 nuts, 2 clamps and 2 lockers

find out more

Fixing Kit for Manifolds - Imperial

Fixing Kit for Manifolds - Imperial

10.20

Application: Series 2 and Series 3 to approx 1980 with 2.25 litre petrol engine.

Description: Imperial (inch) threaded kit of fixings to hold manifolds to cylinder head. Kit includes 6 bolts, 2 set screws, 3 studs, 9 plain washers, 11 lock washers, 3 nuts, 2 clamps and 2 lockers

find out more

Shackle Plate Rear

Shackle Plate Rear

11.16

Application: Series1 1948 to 1953.

Description: Shackle plate for rear springs with plain 9/16" diameter holes.

Approximate dimensions: Length 113mm(4.45"), width 38mm(1.5"), thickness 9.2mm(0.36")
find out more

Shackle Plate Rear

Shackle Plate Rear

13.02

Application: Series 1 1948 to 1953.

Description: Shackle plate for rear springs with 1/2"BSF threaded holes.

Approximate dimensions: Length 113mm(4.45"), width 38mm(1.5"), thickness 9.2mm(0.36")

find out more

Clip for 3/16" Brake Pipe

Clip for 3/16

1.39

Application: Series1, Series2/2A and Series3 models.

Description: Reproduction stainless steel clip for brake pipes. Intended for 3/16" pipe, but will work with 1/4" diameter pipe also.

Approximate dimensions: Length 20mm(0.8"), width 10mm(3/8"), height 5mm(0.2"), hole diameter 4mm(0.16").

find out more

Rear End-plate for Cylinder Head

Rear End-plate for Cylinder Head

97.66

Application: Series 1 petrol models 1948 to 1958, Series 2 models with 2 litre petrol engine.

Description: Reproduction end plate in cast aluminium with mounting aperature for thermo switch.

Approximate dimensions: Length 91mm(3.6"), height 84mm(3.3"), depth 18.4mm(0.72")

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -