Digital Dispensary

Product Sections


Best Sellers

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Gaiter for High/Low Gear Lever

Gaiter for High/Low Gear Lever

2.46

Application: Series 1, Series 2/2A and Series 3.

Description: Reproduction rubber gaiter for the high/low gear lever.

Approximate dimensions: Overall length 143mm, height 90mm.

find out more

Male Union for Vacuum Pipe

Male Union for Vacuum Pipe

3.25

Application: Series 1 and Series 2A.

Description: Brass male union for 1/8" copper pipe. Threaded to fit Solex 32PBI.

Aproximate dimensions: Length 10mm(0.39"), internal diameter 1/8"(3.2mm), hex 9mm(0.35") across flats, thread 1/4"BSF.

find out more

Sump Gasket Series 1

Sump Gasket Series 1

10.82

Application: Series 1 1600cc or 2000cc petrol (gasolene) engine.
Description: Original cork sump gasket, manufactured in the 1950's.
find out more

'O' Ring for Thermostat

'O' Ring for Thermostat

0.55

Application: Series 1, 2 & 3 4cylinder engines.
Description: 'O' ring for sealing thermostat to cylinder head.
Approximate dimensions: outside diameter 55mm (2.2").
Original part number 01645
find out more

Swivel Housing Outer Seal

Swivel Housing Outer Seal

13.78

Application: Series 1, 2 & 3 front axles.
Description: Genuine oil seal for swivel housings.
Approximate dimensions: Outside diameter 16.8cm (6.6"), thickness 14.7mm (0.58")
Original part number: 502406.
find out more

Grommet for vacuum pipe

Grommet for vacuum pipe

4.37

Application: Series 1 and Series 2A.

Description: Split rubber grommet for us with 214228 retaining clip. Used on 1/8" diameter copper vacuum pipe.

Approximate dimensions: Length 17mm(0.67"), internal diameter 3mm(1/8"), overall diameter 9mm(0.35")

find out more

Set of Rivets for Bonnet Strip

Set of Rivets for Bonnet Strip

10.22

Application: Series 1 and early Series 2A.

Description: Set of 12 bifurcated rivets in black for retaining the bonnet rest strip 300824A.

Approximate dimensions: Head diameter 9.5mm(3/8"), length 14mm(9/16"), shank diameter 4.8mm(3/16").

find out more

Series1, 2 & 3 Wheel Bearing Kit with Japanese Bearings

Series1,  2 & 3 Wheel Bearing Kit with Japanese Bearings

39.94

Application: Series 1 front axle only, Series 2, Series 2A and Series 3 to 1980. Where inner bearing is larger than outer bearing. Covers both long and short wheel base vehicles, suitable for either front or rear wheel.

Description: Kit of parts to service one wheel hub. Kit comprises inner and outer Japanese manufactured wheel bearings (NTN or similar brand), Gaco inner seal, flange gasket, hub nut locker, felt outer seal, 'o' ring outer seal and split pin.

find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > LAND Rover Series One Parts > Land Rover Series One Fuel System
Page:   <<   <  1  2  3  4  5
Nut for Fuel Pipe 5/16 Ref: 50421
Application: Series 1 with petrol engine.

Description: Brass female nut 1/4"BSP for use with 3136 solder-on nipple on 5/16" diameter copper pipe.

Approximate dimensions: Nut is 16mm(5/8") across flats.



Price: 3.72 (4.46 Including VAT at 20%)




People who bought this item also bought:
1. 5/16" diameter Copper Pipe - per inch (Ref: ZZHCP516)
2. 1/8" diameter Copper Pipe - per inch (Ref: ZZHCP018)
3. 80" Brake Pipe Set RHD (Ref: ZZGB5600)
Nut for Fuel Pipe 5/16
5/16" diameter Copper Pipe - per inch Ref: ZZHCP516
Application: Series 1 fuel pipe and brake pipe.

Description: 5/16" outside diameter hard copper pipe. Suitable for use with either fuel or brake fluid. We sell this by the inch,but if you want a full 25' roll contact us by phone or email for a quote.

Price: 0.14 (0.17 Including VAT at 20%)




People who bought this item also bought:
1. 1/8" diameter Copper Pipe - per inch (Ref: ZZHCP018)
2. 80" Brake Pipe Set RHD (Ref: ZZGB5600)
3. Nut for Fuel Pipe 5/16 (Ref: 50421)
5/16
Vacuum Advance Pipe Ref: 214231
Application: Series 1 petrol engines.

Description: 28"(70cm) long 1/8" diameter copper pipe with brass nut and nipple(soldered on). This is connection for distributor. Use 260707 and 260708 for connection to caburetor.

Price: 15.00 (18.00 Including VAT at 20%)




People who bought this item also bought:
1. Male Union for Vacuum Pipe (Ref: 260707)
2. Seal Kit for Brake Master Cylinder (Ref: ZZSP1975-5)
3. Olive for Vacuum Pipe (Ref: 260708)
Vacuum Advance Pipe
Retaining Clip for Vacuum Pipe Ref: 214228
Application: Series 1 and Series 2A.

Description: Retaining clip for copper vacuum pipe for advance and retard.

Approximate dimensions: 41.5mm(1.6") x 13mm(0.5") x 9mm(0.35"). Mounting hole 7mm(0.28")


Price: 2.32 (2.78 Including VAT at 20%)




People who bought this item also bought:
1. Grommet for vacuum pipe (Ref: 214229)
2. Male Union for Vacuum Pipe (Ref: 260707)
3. Vacuum Advance Pipe (Ref: 214231)
Retaining Clip for Vacuum Pipe
Grommet for vacuum pipe Ref: 214229
Application: Series 1 and Series 2A.

Description: Split rubber grommet for us with 214228 retaining clip. Used on 1/8" diameter copper vacuum pipe.

Approximate dimensions: Length 17mm(0.67"), internal diameter 3mm(1/8"), overall diameter 9mm(0.35")

Price: 3.64 (4.37 Including VAT at 20%)




People who bought this item also bought:
1. Brush Set for Starter Motor (Ref: 260055)
2. Male Union for Vacuum Pipe (Ref: 260707)
3. Retaining Clip for Vacuum Pipe (Ref: 214228)
Grommet for vacuum pipe
Male Union for Vacuum Pipe Ref: 260707
Application: Series 1 and Series 2A.

Description: Brass male union for 1/8" copper pipe. Threaded to fit Solex 32PBI.

Aproximate dimensions: Length 10mm(0.39"), internal diameter 1/8"(3.2mm), hex 9mm(0.35") across flats, thread 1/4"BSF.

Price: 2.71 (3.25 Including VAT at 20%)




People who bought this item also bought:
1. Vacuum Advance Pipe (Ref: 214231)
2. Olive for Vacuum Pipe (Ref: 260708)
3. Retaining Clip for Vacuum Pipe (Ref: 214228)
Male Union for Vacuum Pipe
Olive for Vacuum Pipe Ref: 260708
Application: Series 1 and Series2 with Solex 32PBI carburettor.

Description: Brass olive for use with 1/8" copper pipe.

Approximate dimensions: Length 4.7mm(0.19"), outside diameter 4.7mm(0.19"), internal dimater 1/8"(3.2mm).

Price: 0.70 (0.84 Including VAT at 20%)




People who bought this item also bought:
1. Male Union for Vacuum Pipe (Ref: 260707)
2. Flexible Fuel Pipe (Ref: 276267)
3. Vacuum Advance Pipe (Ref: 214231)
Olive for Vacuum Pipe
Nut - Vacuum Pipe to Distributor Ref: 3783
Application: Series 1 petrol models and early series2.

Description: Brass female nut for connecting vacuum advance pipe to distributor. Use with 3787 solder on nipple and 1/8" copper pipe.

Approximate dimensions: 5/16UNF thread with 3/8"(9.5mm) across flats hexagon x 8.4mm(0.33") long.

Price: 2.09 (2.51 Including VAT at 20%)




People who bought this item also bought:
1. Nipple for Vacuum Pipe (Ref: 3787)
2. 1/8" diameter Copper Pipe - per inch (Ref: ZZHCP018)
3. Male Union for Vacuum Pipe (Ref: 260707)
Nut - Vacuum Pipe to Distributor
Nipple for Vacuum Pipe Ref: 3787
Application: Series 1 and early Series 2 petrol models.

Description: Brass solder on nipple for copper vacuum advance pipe. Used with 3783 nut.

Approximate dimesions: Outside diameter 6.4mm(0.25"), inside diameter 1/8"(3.2mm), 1/22(12.7mm) long.

Price: 2.95 (3.54 Including VAT at 20%)




People who bought this item also bought:
1. Nut - Vacuum Pipe to Distributor (Ref: 3783)
2. Male Union for Vacuum Pipe (Ref: 260707)
3. 1/8" diameter Copper Pipe - per inch (Ref: ZZHCP018)
Nipple for Vacuum Pipe
1/8" diameter Copper Pipe - per inch Ref: ZZHCP018
Application: Series 1 and early Series 2 vacuum advance pipe.

Description: 1/8" outside diameter copper pipe - sold by the inch. Vacuum pipe on Series 1 is approx 20" long.

Price: 0.09 (0.11 Including VAT at 20%)




People who bought this item also bought:
1. Nipple for Vacuum Pipe (Ref: 3787)
2. Nut - Vacuum Pipe to Distributor (Ref: 3783)
3. Male Union for Vacuum Pipe (Ref: 260707)
1/8
Digital Dispensary > LAND Rover Series One Parts > Land Rover Series One Fuel System
Page:   <<   <  1  2  3  4  5

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Steering Arm - Series 1

Steering Arm - Series 1

17.82

Application: Series 1 models 1948 to 1956 approx.

Description: Drop arm for early type steering box. This arm is held in place with a pinch bolt.

Approximate dimensions: Overall length 17.4cm(6.9")

find out more

'D' Washer - Pedal Shaft

'D' Washer - Pedal Shaft

0.96

Application: Series 1 models.

Description: 'D' washer for support shaft for brake and clutch pedals.

Approximate dimensions: Outside diameter 38mm(1.5"), thickness 3mm(1/8").


find out more

Fixing Kit for Manifolds - Metric

Fixing Kit for Manifolds - Metric

12.83

Application: Series 3 from 1980 with 2.25 litre petrol engine.

Description: Metric threaded kit of fixings to hold manifolds to cylinder head. Kit includes 6 bolts, 2 set screws, 3 studs, 9 plain washers, 11 lock washers, 3 nuts, 2 clamps and 2 lockers

find out more

Fixing Kit for Manifolds - Imperial

Fixing Kit for Manifolds - Imperial

10.20

Application: Series 2 and Series 3 to approx 1980 with 2.25 litre petrol engine.

Description: Imperial (inch) threaded kit of fixings to hold manifolds to cylinder head. Kit includes 6 bolts, 2 set screws, 3 studs, 9 plain washers, 11 lock washers, 3 nuts, 2 clamps and 2 lockers

find out more

Shackle Plate Rear

Shackle Plate Rear

11.16

Application: Series1 1948 to 1953.

Description: Shackle plate for rear springs with plain 9/16" diameter holes.

Approximate dimensions: Length 113mm(4.45"), width 38mm(1.5"), thickness 9.2mm(0.36")
find out more

Shackle Plate Rear

Shackle Plate Rear

13.02

Application: Series 1 1948 to 1953.

Description: Shackle plate for rear springs with 1/2"BSF threaded holes.

Approximate dimensions: Length 113mm(4.45"), width 38mm(1.5"), thickness 9.2mm(0.36")

find out more

Clip for 3/16" Brake Pipe

Clip for 3/16

1.39

Application: Series1, Series2/2A and Series3 models.

Description: Reproduction stainless steel clip for brake pipes. Intended for 3/16" pipe, but will work with 1/4" diameter pipe also.

Approximate dimensions: Length 20mm(0.8"), width 10mm(3/8"), height 5mm(0.2"), hole diameter 4mm(0.16").

find out more

Rear End-plate for Cylinder Head

Rear End-plate for Cylinder Head

97.66

Application: Series 1 petrol models 1948 to 1958, Series 2 models with 2 litre petrol engine.

Description: Reproduction end plate in cast aluminium with mounting aperature for thermo switch.

Approximate dimensions: Length 91mm(3.6"), height 84mm(3.3"), depth 18.4mm(0.72")

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -