Digital Dispensary

Product Sections


Best Sellers

Brass Nut 5/16"BSF

Brass Nut 5/16

1.66

Application: Series1 exhaust manifold.

Description: Brass nut 5/16"BSF for holding downpipe to exhaust manifold.

Approximate dimensions: 3/8"(9.5mm) high, 17/32"(13.5mm) across flats.

find out more

Grommet - Brake Pipe Support

Grommet - Brake Pipe Support

0.31

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Grommet to support brake pipe on rear axle casing. Used with clip 56666.
Approximate dimensions: overall length 21.5mm(0.85"), inside diameter 7mm(0.3"), outside diameter 14.5mm(0.6")
find out more

Clip for brake pipe grommet

Clip for brake pipe grommet

0.61

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Clip for brake pipe support grommet 6860L. Used on rear axle casing on all Series models from 1954 to 1984.
Approximate dimensions: 11mm(7/16") wide, 34mm(1.3") long, mounting hole 5mm(0.2") diameter, internal diameter of clip when closed 13mm.
find out more

Ignition Coil

Ignition Coil

30.11

Application: Series 1 and Series 2.
Description: Reproduction ignition coil with screw in high tension connection. Supplied with acorn nut and split washer.
Approximate dimensions: Body diameter 54.8mm(2.2"), height 15cm(5.9")
find out more

Stud for Exhaust Manifold

Stud for Exhaust Manifold

1.85

Application: Series 1 1.6 and 2.0 litre, Series 2 2 litre.

Description: Stud to hold downpipe to exhaust manifold.

Approximate dimesions: 5/16"BSF threads to both ends, overall length 1.25"(32mm)

find out more

Black High Tension Lead, Copper Cored

Black High Tension Lead, Copper Cored

1.86

Application: Series One and Series Two
Description: Black high tension cable for spark plugs. 7mm(0.28") outside diameter with 19 strand copper core.

Sold by the metre
find out more

Rocker Cover Gasket

Rocker Cover Gasket

7.72

Application: 1.6ltr and 2.0ltr petrol (gasolene) engines.

Description: Gasket for rocker cover to cylinder head.
find out more

Gasket Exhaust Manifold to Down Pipe

Gasket Exhaust Manifold to Down Pipe

0.96

Application: Series 1, 2 & 3 four cylinder engines.
Description: Square flange gasket for exhaust. Used on various exhaust manifolds and on some pipe to pipe exhaust joints.
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > REGULAR Service and Repair Parts > Braking Systems > Hydraulics and application systems
Page:   <<   <  1  2  3  4  5  ...   >   >>
Replacement Brake Master Cylinder S2A & S3 Ref: 90577520D
Application: 109" dual line system upto 1980. Standard on North America spec vehicles, optional in other markets.
Description: Replacement dual line brake master cylinder with cast iron body. Can be distinquished from post 1980 dual line master cylinder by the vertical retaining screws for the reservior.
Approximate dimensions: Length 181mm (7.16"), bore 25.4mm (1"), mounting centres 80mm ( 3.15").

Price: 38.00 (45.60 Including VAT at 20%)



Replacement Brake Master Cylinder S2A & S3
Lucas Brake Master Cylinder Ref: STC1284
Application: Discovery 1 with ABS (advanced braking system).
Description: Lucas TRW PML218 brake master cylinder. Supplied with fluid level sensor.
Approximate dimensions: bore diameter 25.4mm (1"), mounting hole centres 96mm (3.8").

Price: 105.00 (126.00 Including VAT at 20%)



Lucas Brake Master Cylinder
Reservoir for S1 Brakes Ref: 271581
Application: Series One 1948 to 1958.

Description: Reproduction steel brake fluid reservoir supplied with steel cap.

Approximate dimensions: Overall length 145mm(5.7"), overall diameter 68.5mm(2.7")

Back in stock.

Price: 32.40 (38.88 Including VAT at 20%)




People who bought this item also bought:
1. Solid Aluminium Rivets - 3/8" long - bag of 50 (Ref: 300789X50)
2. Spring Ring, Boot to Body of Steering Ball Joint (Ref: 214685)
3. Clevis for Hand Brake Linkage (Ref: 215809)


Related products:
1. 1litre Bottle of Silicon Brake Fluid (Ref: ZZDYNSILIDOT5)
Reservoir for S1 Brakes
Cap for Brake Reservoir Ref: 500201
Application: Series 2 and Series 3. Also fits Series 1 reservoir.

Description: Reproduction pressed aluminium cap with sealing washer.

Approximate dimensions: Overall diameter 52.3mm(2.06"), height 18mm(0.71")

Price: 8.12 (9.74 Including VAT at 20%)




People who bought this item also bought:
1. Vacuum Pipe Elbow (Ref: ZZ030.016)
2. Speedo Drive Cable (Ref: RTC3484D)
3. Oil Seal Differential Pinion (Ref: FRC4586)
Cap for Brake Reservoir
Reproduction Combined Reservoir Ref: 504105d
Application: Series 2 and 2A.

Description: Reproduction steel combined reservoir serving both brake and clutch master cylinders. Internal partition prevents failure of both systems if one develops a leak.

Approximate dimensions: overall length 145mm(5.7"), overall diameter 68.5mm(2.7")

Price: 57.37 (68.84 Including VAT at 20%)





Related products:
1. 1litre Bottle of Silicon Brake Fluid (Ref: ZZDYNSILIDOT5)
Reproduction Combined Reservoir
Brake Hose Series 1, 2A & S3 Ref: RTC3386=
Application: Series 1 from 1954 to 1958, Series 2A 88" front and rear, Series 2A 109" front, Series 3 88" rear.

Description: Bearmach brand flexible brake hose, overall length 39.5cm (15.6"), thread 3/8UNF.

Price: 10.00 (12.00 Including VAT at 20%)




People who bought this item also bought:
1. Expander Unit for Hand Brake (Ref: 515366D)
2. Yellow Knob - 4WD Gear lever (Ref: 232813)
3. Locker for Spring U Bolts (Ref: 234734)
Brake Hose Series 1, 2A & S3
Pair of Brake Hoses S2A & S3 Ref: RTC3386KIT
Application: Series 2A 88" front and rear, Series 2A 109" front.

Description: Pair of Bearmach flexible brake hoses with star washers, retaining nuts and copper sealing washers. Overall length of each hose 39.5cm (15.6"), thread 3/8UNF.

Price: 18.50 (22.20 Including VAT at 20%)





Related products:
1. 1litre Bottle of Silicon Brake Fluid (Ref: ZZDYNSILIDOT5)
Pair of Brake Hoses S2A & S3
Replacement Brake Hose Ser2A & Ser3 Ref: RTC3353D
Application: Series 2A and Series 3 109" rear to 1980.
Description: Replacement flexible brake hose, overall length 44cm (17.3"), thread 3/8UNF.

Price: 5.00 (6.00 Including VAT at 20%)



Replacement Brake Hose Ser2A & Ser3
Replacement Brake Hose Series 3 Ref: RTC5903D
Application: Series 3 front with imperial thread to 1980.
Description: Replacement front brake hose.
Approximate dimensions: Overall length 37cm (14.6"), thread 3/8UNF.

Price: 5.00 (6.00 Including VAT at 20%)



Replacement Brake Hose Series 3
Pair of Replacement Brake Hoses Series 3 Ref: RTC5903DKIT
Application: Series 3 front with imperial thread to 1980.
Description: Pair of replacement front brake hoses with star washers and retaining nuts.
Approximate dimensions: Overall length of each 37cm (14.6"), thread 3/8UNF.

Price: 10.00 (12.00 Including VAT at 20%)




People who bought this item also bought:
1. Steering Damper (Ref: STC786D)
2. Pair of Hand Brake Shoes (Ref: STC3821)
3. Steering Ball Joint Series 3 - LH thread (Ref: RTC5868=)
Pair of Replacement Brake Hoses Series 3
Digital Dispensary > REGULAR Service and Repair Parts > Braking Systems > Hydraulics and application systems
Page:   <<   <  1  2  3  4  5  ...   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Lever Arm for 4WD Select

Lever Arm for 4WD Select

15.80

Application: Series 1 to 1955.

Description: Lever arm with bronze bush to middle hole for selection of four wheel drive in high ratio.

Approximate dimensions: Overall length 116mm(4.6"), width 15.5mm(0.61"), thickness 6mm(0.24"), distance from centre of bushed hole to centre of slotted hole 36mm(1.42"), distance from centre of bushed hole to other hole is 68mm(2.67")

find out more

Olive for Vacuum Pipe

Olive for Vacuum Pipe

0.84

Application: Series 1 and Series2 with Solex 32PBI carburettor.

Description: Brass olive for use with 1/8" copper pipe.

Approximate dimensions: Length 4.7mm(0.19"), outside diameter 4.7mm(0.19"), internal dimater 1/8"(3.2mm).

find out more

Male Union for Vacuum Pipe

Male Union for Vacuum Pipe

2.40

Application: Series 1 and Series 2A.

Description: Brass male union for 1/8" copper pipe. Threaded to fit Solex 32PBI.

Aproximate dimensions: Length 10mm(0.39"), internal diameter 1/8"(3.2mm), hex 9mm(0.35") across flats, thread 1/4"BSF.

find out more

Grommet for vacuum pipe

Grommet for vacuum pipe

3.83

Application: Series 1 and Series 2A.

Description: Split rubber grommet for us with 214228 retaining clip. Used on 1/8" diameter copper vacuum pipe.

Approximate dimensions: Length 17mm(0.67"), internal diameter 3mm(1/8"), overall diameter 9mm(0.35")

find out more

Retaining Clip for Vacuum Pipe

Retaining Clip for Vacuum Pipe

2.78

Application: Series 1 and Series 2A.

Description: Retaining clip for copper vacuum pipe for advance and retard.

Approximate dimensions: 41.5mm(1.6") x 13mm(0.5") x 9mm(0.35"). Mounting hole 7mm(0.28")

find out more

Installer Oil Seal

Installer Oil Seal

33.79

Application: Evoque and Freelander 2.

Description: Installer for bellhousing differential oil seal. Use with 307-520.

Approximate dimensions: Overall diameter 80mm(3.15"), inside diameter 54mm(2.13"), height 48.5mm(1.9").

find out more

Installer Oilseal

Installer Oilseal

155.89

Application: Evoque and Freelander 2.

Description: Installer for quillshaft oil seal. Use with 307-520.

Approximate dimensions: Overall diameter 80mm(3.15"), height 64mm(2.52").


find out more

Pinion Bearing for Salisbury Differential

Pinion Bearing for Salisbury Differential

12.37

Application: Series 3 Long Wheel Base and Defender 110 models with rear Salisbury axle.

Descrtiption: Timken/Japanese sourced outer pinion taper roller bearing for Salisbury differentials.

Approximate dimensions: Outside diameter 2.85"(72.3mm), inside diameter 1 3/8"(34.9mm), depth 26.7mm(1.05")

Bearing numbers: HM88649/ HM88610

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -