Digital Dispensary

Product Sections


Best Sellers

Brass Nut 5/16"BSF

Brass Nut 5/16

1.66

Application: Series1 exhaust manifold.

Description: Brass nut 5/16"BSF for holding downpipe to exhaust manifold.

Approximate dimensions: 3/8"(9.5mm) high, 17/32"(13.5mm) across flats.

find out more

Grommet - Brake Pipe Support

Grommet - Brake Pipe Support

0.31

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Grommet to support brake pipe on rear axle casing. Used with clip 56666.
Approximate dimensions: overall length 21.5mm(0.85"), inside diameter 7mm(0.3"), outside diameter 14.5mm(0.6")
find out more

Clip for brake pipe grommet

Clip for brake pipe grommet

0.61

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Clip for brake pipe support grommet 6860L. Used on rear axle casing on all Series models from 1954 to 1984.
Approximate dimensions: 11mm(7/16") wide, 34mm(1.3") long, mounting hole 5mm(0.2") diameter, internal diameter of clip when closed 13mm.
find out more

Ignition Coil

Ignition Coil

30.11

Application: Series 1 and Series 2.
Description: Reproduction ignition coil with screw in high tension connection. Supplied with acorn nut and split washer.
Approximate dimensions: Body diameter 54.8mm(2.2"), height 15cm(5.9")
find out more

Stud for Exhaust Manifold

Stud for Exhaust Manifold

1.85

Application: Series 1 1.6 and 2.0 litre, Series 2 2 litre.

Description: Stud to hold downpipe to exhaust manifold.

Approximate dimesions: 5/16"BSF threads to both ends, overall length 1.25"(32mm)

find out more

Black High Tension Lead, Copper Cored

Black High Tension Lead, Copper Cored

1.86

Application: Series One and Series Two
Description: Black high tension cable for spark plugs. 7mm(0.28") outside diameter with 19 strand copper core.

Sold by the metre
find out more

Rocker Cover Gasket

Rocker Cover Gasket

7.72

Application: 1.6ltr and 2.0ltr petrol (gasolene) engines.

Description: Gasket for rocker cover to cylinder head.
find out more

Gasket Exhaust Manifold to Down Pipe

Gasket Exhaust Manifold to Down Pipe

0.96

Application: Series 1, 2 & 3 four cylinder engines.
Description: Square flange gasket for exhaust. Used on various exhaust manifolds and on some pipe to pipe exhaust joints.
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > REGULAR Service and Repair Parts > Braking Systems > Hydraulics and application systems
Page:   <<   <  1  2  3  4  5  ...   >   >>
Piston for Front Brake Caliper Ref: 606683D
Application: Defender 90 to 'HA' VIN number, Discovery 1 and Range Rover Classic.

Description: Chrome plated steel piston for front brake caliper.

Approximate dimensions: Outside diameter 1.625"(41.3mm), overall length 1.35"(34.3mm)

Price: 3.50 (4.20 Including VAT at 20%)



Piston for Front Brake Caliper
Stainless Steel Piston for Brake Caliper Ref: 606683S
Application: Defender 90 to 'HA' VIN number, Discovery 1 and Range Rover Classic.

Description: Stainless steel piston for front brake caliper.

Approximate dimensions: Outside diameter 1.625"(41.3mm), overall length 1.35"(34.3mm)

Price: 8.00 (9.60 Including VAT at 20%)



Stainless Steel Piston for Brake Caliper
Piston for Rear Brake Caliper Ref: 606696
Application: Discovery 1 and Classic Range Rover.

Description: Replacement chromed steel piston for rear brake caliper.

Approximate dimensions: Outside diameter 1 5/8"( 41.3mm), overall length 1.1"(28.2mm)

Price: 5.67 (6.80 Including VAT at 20%)



Piston for Rear Brake Caliper
Stainless Steel Piston for Brake Caliper Ref: 606696S
Application: Discovery 1 and Classic Range Rover.

Description: Stainless steel piston for rear brake caliper.

Approximate dimensions: Outside diameter 1 5/8"( 41.3mm), overall length 1.1"(28.2mm)

Price: 8.25 (9.90 Including VAT at 20%)



Stainless Steel Piston for Brake Caliper
Piston for Front Caliper Ref: STC201D
Application: Defender front calipers with 46mm diameter pistons.

Description: Replacement chromed steel caliper piston.

Approximate dimensions: Overall diameter 46mm(1.8"!), overall length 31mm(1.2")

Price: 3.50 (4.20 Including VAT at 20%)



Piston for Front Caliper
Stainless Steel Piston for Caliper Ref: STC201S
Application: Defender front calipers with 46mm diameter pistons.

Description: Stainless steel caliper piston.

Approximate dimensions: Overall diameter 46mm(1.8"!), overall length 31mm(1.2")

Price: 8.08 (9.70 Including VAT at 20%)



Stainless Steel Piston for Caliper
Seal Kit for Brake Caliper Ref: AEU1547
Application: Classic Range Rover, Discovery 1 and Defender 90 to 'HA' chassis number.

Description: Genuine seal kit for 1 5/8"(41.3mm) diameter caliper pistons. Kit contains 4x retainers, 4x wiper seals and 4x fluid seals.

Price: 10.68 (12.82 Including VAT at 20%)



Seal Kit for Brake Caliper
Seal Kit for Brake Caliper Ref: AEU2539
Application: Defender front calipers with 46mm(1.8") diameter pistons.

Description: Genuine seal kit for 46mm(1.8") diameter caliper pistons. Kit contains 4x retainers, 4x wiper seals and 4x fluid seals.

Price: 8.64 (10.37 Including VAT at 20%)



Seal Kit for Brake Caliper
Front Caliper Repair Kit Ref: STC1280D
Application: Defender front caliper from 1994 onwards.

Description: Replacement set of 4 pistons, 4x seal retainers, 4x wiper seals and 4x fluid seals for 46mm diameter piston calipers.

Price: 16.00 (19.20 Including VAT at 20%)



Front Caliper Repair Kit
Kit of Caliper Guide Pins Ref: STC1910
Application: Freelander One to 'YA', Discovery Two and Range Rover 38A 1995 to 2002.
Description: Genuine set of guide pins for front brake calipers. Kit serves 2 calipers.
Approximate dimensions: Pins are 5.9cm(2.3") long.

Price: 12.35 (14.82 Including VAT at 20%)



Kit of Caliper Guide Pins
Digital Dispensary > REGULAR Service and Repair Parts > Braking Systems > Hydraulics and application systems
Page:   <<   <  1  2  3  4  5  ...   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Lever Arm for 4WD Select

Lever Arm for 4WD Select

15.80

Application: Series 1 to 1955.

Description: Lever arm with bronze bush to middle hole for selection of four wheel drive in high ratio.

Approximate dimensions: Overall length 116mm(4.6"), width 15.5mm(0.61"), thickness 6mm(0.24"), distance from centre of bushed hole to centre of slotted hole 36mm(1.42"), distance from centre of bushed hole to other hole is 68mm(2.67")

find out more

Olive for Vacuum Pipe

Olive for Vacuum Pipe

0.84

Application: Series 1 and Series2 with Solex 32PBI carburettor.

Description: Brass olive for use with 1/8" copper pipe.

Approximate dimensions: Length 4.7mm(0.19"), outside diameter 4.7mm(0.19"), internal dimater 1/8"(3.2mm).

find out more

Male Union for Vacuum Pipe

Male Union for Vacuum Pipe

2.40

Application: Series 1 and Series 2A.

Description: Brass male union for 1/8" copper pipe. Threaded to fit Solex 32PBI.

Aproximate dimensions: Length 10mm(0.39"), internal diameter 1/8"(3.2mm), hex 9mm(0.35") across flats, thread 1/4"BSF.

find out more

Grommet for vacuum pipe

Grommet for vacuum pipe

3.83

Application: Series 1 and Series 2A.

Description: Split rubber grommet for us with 214228 retaining clip. Used on 1/8" diameter copper vacuum pipe.

Approximate dimensions: Length 17mm(0.67"), internal diameter 3mm(1/8"), overall diameter 9mm(0.35")

find out more

Retaining Clip for Vacuum Pipe

Retaining Clip for Vacuum Pipe

2.78

Application: Series 1 and Series 2A.

Description: Retaining clip for copper vacuum pipe for advance and retard.

Approximate dimensions: 41.5mm(1.6") x 13mm(0.5") x 9mm(0.35"). Mounting hole 7mm(0.28")

find out more

Installer Oil Seal

Installer Oil Seal

33.79

Application: Evoque and Freelander 2.

Description: Installer for bellhousing differential oil seal. Use with 307-520.

Approximate dimensions: Overall diameter 80mm(3.15"), inside diameter 54mm(2.13"), height 48.5mm(1.9").

find out more

Installer Oilseal

Installer Oilseal

155.89

Application: Evoque and Freelander 2.

Description: Installer for quillshaft oil seal. Use with 307-520.

Approximate dimensions: Overall diameter 80mm(3.15"), height 64mm(2.52").


find out more

Pinion Bearing for Salisbury Differential

Pinion Bearing for Salisbury Differential

12.37

Application: Series 3 Long Wheel Base and Defender 110 models with rear Salisbury axle.

Descrtiption: Timken/Japanese sourced outer pinion taper roller bearing for Salisbury differentials.

Approximate dimensions: Outside diameter 2.85"(72.3mm), inside diameter 1 3/8"(34.9mm), depth 26.7mm(1.05")

Bearing numbers: HM88649/ HM88610

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -