Digital Dispensary

Product Sections


Best Sellers

Brass Nut 5/16"BSF

Brass Nut 5/16

1.66

Application: Series1 exhaust manifold.

Description: Brass nut 5/16"BSF for holding downpipe to exhaust manifold.

Approximate dimensions: 3/8"(9.5mm) high, 17/32"(13.5mm) across flats.

find out more

Grommet - Brake Pipe Support

Grommet - Brake Pipe Support

0.31

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Grommet to support brake pipe on rear axle casing. Used with clip 56666.
Approximate dimensions: overall length 21.5mm(0.85"), inside diameter 7mm(0.3"), outside diameter 14.5mm(0.6")
find out more

Clip for brake pipe grommet

Clip for brake pipe grommet

0.61

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Clip for brake pipe support grommet 6860L. Used on rear axle casing on all Series models from 1954 to 1984.
Approximate dimensions: 11mm(7/16") wide, 34mm(1.3") long, mounting hole 5mm(0.2") diameter, internal diameter of clip when closed 13mm.
find out more

Ignition Coil

Ignition Coil

30.11

Application: Series 1 and Series 2.
Description: Reproduction ignition coil with screw in high tension connection. Supplied with acorn nut and split washer.
Approximate dimensions: Body diameter 54.8mm(2.2"), height 15cm(5.9")
find out more

Stud for Exhaust Manifold

Stud for Exhaust Manifold

1.85

Application: Series 1 1.6 and 2.0 litre, Series 2 2 litre.

Description: Stud to hold downpipe to exhaust manifold.

Approximate dimesions: 5/16"BSF threads to both ends, overall length 1.25"(32mm)

find out more

Black High Tension Lead, Copper Cored

Black High Tension Lead, Copper Cored

1.86

Application: Series One and Series Two
Description: Black high tension cable for spark plugs. 7mm(0.28") outside diameter with 19 strand copper core.

Sold by the metre
find out more

Rocker Cover Gasket

Rocker Cover Gasket

7.72

Application: 1.6ltr and 2.0ltr petrol (gasolene) engines.

Description: Gasket for rocker cover to cylinder head.
find out more

Gasket Exhaust Manifold to Down Pipe

Gasket Exhaust Manifold to Down Pipe

0.96

Application: Series 1, 2 & 3 four cylinder engines.
Description: Square flange gasket for exhaust. Used on various exhaust manifolds and on some pipe to pipe exhaust joints.
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > REGULAR Service and Repair Parts > Braking Systems > Hydraulics and application systems
Page:   <<   <  1  2  3  4  5  ...   >   >>
Brake Master Cylinder and Conversion Kit Ref: 235006D
Application: Series 1 80" 1948 to 1953 with 1/4" diameter brake pipes.

Desc ription: Replacement master cylinder modified to fit early Series 1 models. Outrigger requires an additional 5/16" diameter hole to be drilled to mount the 2 hole flange cylinder.

Price: 175.00 (210.00 Including VAT at 20%)





Related products:
1. 1litre Bottle of Silicon Brake Fluid (Ref: ZZDYNSILIDOT5)
Brake Master Cylinder and Conversion Kit
Brake Master Cylinder and Conversion Kit Ref: 241687D
Application: Series 1 from 1954 to 1958 with 3/16" diameter brake pipes.

Description: Early Series 2 brake master cylinder and conversion kit to allow it to be fitted to Series 1.


Out of stock, due January 2018.

Price: 101.00 (121.20 Including VAT at 20%)




Related products:
1. 1litre Bottle of Silicon Brake Fluid (Ref: ZZDYNSILIDOT5)
Brake Master Cylinder and Conversion Kit
Seal Kit for Brake Master Cylinder Ref: ZZSP1975-5
Application: Series One from 1948 to 1958.
Description: Reproduction seal kit for brake master cylinder. Suits all short wheel base models. Not suitable for long wheel base models.
Original part number 278524

Price: 16.50 (19.80 Including VAT at 20%)




People who bought this item also bought:
1. Bolt, Steering Relay to Chassis (Ref: BX605281)


Related products:
1. Cylinder Hones - Brakes (Ref: ZZLAS2243)
2. 1litre Bottle of Silicon Brake Fluid (Ref: ZZDYNSILIDOT5)
Seal Kit for Brake Master Cylinder
Seal Kit for Brake Master Cylinder 107/109 Ref: 278523
Application: Series One 107 and 109 models with 11" brake drums.
Description: Reproduction seal kit for brake master cylinder on long wheel base models. Kit may not include metalwork - depending on availability. This kit is for 1" bore cylinders.

Price: 18.00 (21.60 Including VAT at 20%)




People who bought this item also bought:
1. Grommet - Brake Pipe Support (Ref: 6860L)
2. Set of Rivets for Bonnet Strip (Ref: 68087x12)
3. Clip for brake pipe grommet (Ref: 56666)


Related products:
1. 1litre Bottle of Silicon Brake Fluid (Ref: ZZDYNSILIDOT5)
2. Cylinder Hones - Brakes (Ref: ZZLAS2243)
Seal Kit for Brake Master Cylinder 107/109
Brake Master Cylinder - CB type Ref: 520849D
Application: Early Series2 and 2A short wheelbase models.

Description: Replacement brake master cylinder of the 'CB' type.

Approximate dimensions: 3/4" bore, from mounting face to back of body 123mm( 4.8"), body diameter 45mm(1.8"), mounting hole centres 2.25"(57.5mm).

Previous part number: GMC314

Price: 24.05 (28.86 Including VAT at 20%)



Brake Master Cylinder - CB type
Brake Master Cylinder - CB type. Ref: 564706D
Application: Early Series2 and 2A long wheelbase models.

Description: Replacement brake master cylinder of the 'CB' type.

Approximate dimensions: 1" bore, from mounting face to back of body 136mm(5.35"), body diameter 51mm(2"), mounting hole centres 2.5"(63.5mm).

Previous part number: GMC312

Price: 21.06 (25.27 Including VAT at 20%)



Brake Master Cylinder - CB type.
Lucas Brake Master Cylinder Series 2A &3 Ref: 90569126.
Application: Series 2A and Series 3 SWB (88") models with non-servo brakes, uses remote reservoir.
Description: Lucas - TRW brake master cylinder with cast iron body. Also used as clutch master on 2A - see clutch section.
Approximate dimensions: Length of body 130mm, pushrod 80mm, bore 19mm (3/4"), mounting centres 57mm.

Price: 30.02 (36.02 Including VAT at 20%)




People who bought this item also bought:
1. Replacement Brake Master Cylinder S2A & S3 (Ref: 90569128D)
2. Dust Cap for Bleed Screw (Ref: 594091)
3. Lockheed Delphi Wheel Cylinder S1, S2A & S3 (Ref: 243303D)


Related products:
1. 1litre Bottle of Silicon Brake Fluid (Ref: ZZDYNSILIDOT5)
Lucas Brake Master Cylinder Series 2A &3
Replacement Brake Master Cylinder S2A & S3 Ref: 90569126D.
Application: Series 2A and Series 3 SWB (88") models with non-servo brakes, uses remote reservoir.
Description: Replacement brake master cylinder with cast iron body. Also used as clutch master on 2A - see clutch section.
Approximate dimensions: Length of body 130mm, pushrod 80mm, bore 19mm (3/4"), mounting centres 57mm.

Price: 12.00 (14.40 Including VAT at 20%)



Replacement Brake Master Cylinder S2A & S3
Replacement Brake Master Cylinder S2A & S3 Ref: 90569128D
Application: 109" non-servo vehicles 'CV' type cylinder.
Description: Replacement single line brake master cylinder for use with remote reservoir.
Approximate dimensions: Length excluding pushrod 143mm (5.63"), bore 28.6mm (1.125"), mounting hole centres 63.5mm (2.5").

Price: 16.00 (19.20 Including VAT at 20%)




People who bought this item also bought:
1. Lucas Brake Master Cylinder Series 2A &3 (Ref: 90569126.)
2. Dust Cap for Bleed Screw (Ref: 594091)
3. Lockheed Delphi Wheel Cylinder S1, S2A & S3 (Ref: 243303D)


Related products:
1. 1litre Bottle of Silicon Brake Fluid (Ref: ZZDYNSILIDOT5)
Replacement Brake Master Cylinder S2A & S3
Replacement Brake Master Cylinder S2A & S3 Ref: 569671D
Application: 88" dual line system upto 1980. Standard on North America spec vehicles, optional in other markets. Also standard on many military models.

Description: Replacement dual line brake master cylinder with cast iron body. Can be distinquished from post 1980 dual line master cylinder by the vertical retaining screws for the reservior.

Approximate dimensions: Length 181mm (7.16"), bore 22.2mm (0.875"), mounting centres 80mm ( 3.15").

Price: 45.00 (54.00 Including VAT at 20%)



Replacement Brake Master Cylinder S2A & S3
Digital Dispensary > REGULAR Service and Repair Parts > Braking Systems > Hydraulics and application systems
Page:   <<   <  1  2  3  4  5  ...   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Lever Arm for 4WD Select

Lever Arm for 4WD Select

15.80

Application: Series 1 to 1955.

Description: Lever arm with bronze bush to middle hole for selection of four wheel drive in high ratio.

Approximate dimensions: Overall length 116mm(4.6"), width 15.5mm(0.61"), thickness 6mm(0.24"), distance from centre of bushed hole to centre of slotted hole 36mm(1.42"), distance from centre of bushed hole to other hole is 68mm(2.67")

find out more

Olive for Vacuum Pipe

Olive for Vacuum Pipe

0.84

Application: Series 1 and Series2 with Solex 32PBI carburettor.

Description: Brass olive for use with 1/8" copper pipe.

Approximate dimensions: Length 4.7mm(0.19"), outside diameter 4.7mm(0.19"), internal dimater 1/8"(3.2mm).

find out more

Male Union for Vacuum Pipe

Male Union for Vacuum Pipe

2.40

Application: Series 1 and Series 2A.

Description: Brass male union for 1/8" copper pipe. Threaded to fit Solex 32PBI.

Aproximate dimensions: Length 10mm(0.39"), internal diameter 1/8"(3.2mm), hex 9mm(0.35") across flats, thread 1/4"BSF.

find out more

Grommet for vacuum pipe

Grommet for vacuum pipe

3.83

Application: Series 1 and Series 2A.

Description: Split rubber grommet for us with 214228 retaining clip. Used on 1/8" diameter copper vacuum pipe.

Approximate dimensions: Length 17mm(0.67"), internal diameter 3mm(1/8"), overall diameter 9mm(0.35")

find out more

Retaining Clip for Vacuum Pipe

Retaining Clip for Vacuum Pipe

2.78

Application: Series 1 and Series 2A.

Description: Retaining clip for copper vacuum pipe for advance and retard.

Approximate dimensions: 41.5mm(1.6") x 13mm(0.5") x 9mm(0.35"). Mounting hole 7mm(0.28")

find out more

Installer Oil Seal

Installer Oil Seal

33.79

Application: Evoque and Freelander 2.

Description: Installer for bellhousing differential oil seal. Use with 307-520.

Approximate dimensions: Overall diameter 80mm(3.15"), inside diameter 54mm(2.13"), height 48.5mm(1.9").

find out more

Installer Oilseal

Installer Oilseal

155.89

Application: Evoque and Freelander 2.

Description: Installer for quillshaft oil seal. Use with 307-520.

Approximate dimensions: Overall diameter 80mm(3.15"), height 64mm(2.52").


find out more

Pinion Bearing for Salisbury Differential

Pinion Bearing for Salisbury Differential

12.37

Application: Series 3 Long Wheel Base and Defender 110 models with rear Salisbury axle.

Descrtiption: Timken/Japanese sourced outer pinion taper roller bearing for Salisbury differentials.

Approximate dimensions: Outside diameter 2.85"(72.3mm), inside diameter 1 3/8"(34.9mm), depth 26.7mm(1.05")

Bearing numbers: HM88649/ HM88610

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -