Digital Dispensary

Product Sections


Best Sellers

Grommet - Brake Pipe Support

Grommet - Brake Pipe Support

0.31

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Grommet to support brake pipe on rear axle casing. Used with clip 56666.
Approximate dimensions: overall length 21.5mm(0.85"), inside diameter 7mm(0.3"), outside diameter 14.5mm(0.6")
find out more

Clip for brake pipe grommet

Clip for brake pipe grommet

0.61

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Clip for brake pipe support grommet 6860L. Used on rear axle casing on all Series models from 1954 to 1984.
Approximate dimensions: 11mm(7/16") wide, 34mm(1.3") long, mounting hole 5mm(0.2") diameter, internal diameter of clip when closed 13mm.
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Gasket Set for Series Gearboxes

Gasket Set for Series Gearboxes

4.20

Application: Series 1, Series 2 & 3 with 4 or 6 cylinder engines.
Description: Set of replacement gaskets for main and transfer gearboxes. Does NOT include seals.
find out more

Water Pump Series1 Petrol

Water Pump Series1 Petrol

51.00

Application: Series 1 1.6ltr & 2.0ltr petrol (gasolene) engines.

Description: Reproduction cast iron water pump, supplied with gaskets.
find out more

Gaiter for High/Low Gear Lever

Gaiter for High/Low Gear Lever

2.46

Application: Series 1, Series 2/2A and Series 3.

Description: Reproduction rubber gaiter for the high/low gear lever.

Approximate dimensions: Overall length 143mm, height 90mm.

find out more

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

13.70

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Copper Ring Water Pump to Thermostat Housing

Copper Ring Water Pump to Thermostat Housing

7.44

Application: Series One with 1.6 or 2 litre petrol engine. Series Two with 2 litre petrol engine.
Description: Copper ring to support 'O' ring between water pump and thermostat housing.
Approximate dimensions: outside diameter 16mm(0.63"), inside diameter 11mm(0.43"), height 7.5mm(0.3")
find out more

Wheel Stud for Series 1

Wheel Stud for Series 1

5.82

Application: All Series One models.

Description: Reproduction wheel stud for Series 1. Threaded 9/16"BSF. Use with nut 217361.

Approximate dimensions: Overall length 52mm(2"), short threaded end 12mm(0.47"), long threaded end 27.5mm(1.08"), land 12.5mm(0.5")

find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > LAND Rover Series One Parts > Land Rover Series One Suspension Parts
Page:   <<   <  1  2  3
Rear Shock Absorber Ref: RTC4232D
Application: Series 1 1954 onwards, Series 2 and 3 short wheel base models.

Description: Replacement rear shock absorber by Armstrong.

Approximate dimensions: Overall length closed 36.2cm(14.3"), overall length open 55.5cm(21.9").

Original part number 501445

Price: 15.62 (18.74 Including VAT at 20%)




People who bought this item also bought:
1. Seal Kit for Brake Master Cylinder (Ref: ZZSP1975-5)
2. Axle Set of Brake Shoes - 10" (Ref: STC2796DKIT)
3. Front Shock Absorber (Ref: RTC4230D)
Rear Shock Absorber
Bush for Shock Absorber Ref: 552819
Application: Series 1 1954 - 1958, Series 2 and Series 3 shock absorbers. Defender, Discovery 1 and Range Rover Classic anti-roll bar linkage.

Description: Original Equipment shock absorber bush. For eye ended shockers.

Approximate dimensions: outside diameter at widest 36.5mm(1.4"), inside diameter 19mm(0.75"), length 22mm(0.9")

Old part number: 243057

Price: 0.80 (0.96 Including VAT at 20%)




People who bought this item also bought:
1. Rubber Peg for Wiper Blade (Ref: ZZB00100)
2. Repair kit for Water Pump S2 & S3 (Ref: RTC3072D)
3. Spring Ring retaining Small End of Rubber Boot (Ref: 90214684)
Bush for Shock Absorber
Bush for Shock Absorber Ref: 552819D
Application: Series 1 1954 - 1958, Series 2 and Series 3. Defender, Discovery 1 and Range Rover Classic anti-roll bar linkage.

Description: Replacement shock absorber bush. For eye ended shockers. Softer material than the O E version.

Approximate dimensions: outside diameter at widest 36.5mm(1.4"), inside diameter 19mm(0.75"), length 22mm(0.9")

Old part number: 243057

Price: 0.25 (0.30 Including VAT at 20%)




People who bought this item also bought:
1. GKN boxed Universal Joint Repair Kit (Ref: TVC100010D)
2. Washer Shock Absorber Bush (Ref: RYF500160)
3. Shackle Plate Rear (Ref: 58192)
Bush for Shock Absorber
Washer Shock Absorber Bush Ref: RYF500160
Application: Series 1, Series 2 and Series 3 shock absorbers. Defender, Discovery 1 and Range Rover Classic anti-roll bar links.

Description: Replacement washer for retaining shock absorber to spring bottom plate.

Approximate dimensions: overall diameter 41mm(1 5/8"), inside diameter 21.5mm(0.85"), thickness 3.2mm(1/8").

Old part number: 264024

Price: 0.25 (0.30 Including VAT at 20%)




People who bought this item also bought:
1. GKN boxed Universal Joint Repair Kit (Ref: TVC100010D)
2. Shackle Plate Rear (Ref: 58192)
3. Bush for Shock Absorber (Ref: 552819D)
Washer Shock Absorber Bush
Split Pin - Shocker Retention Ref: 4063A
Application: Series 1, Series 2 and Series 3.

Description: Replacement split pin for retaining shock absorber to bottom plate of spring.

Approximate dimensions: Overall length 55.5mm(2.2"), diameter 6mm(0.24")

Price: 0.21 (0.25 Including VAT at 20%)




People who bought this item also bought:
1. Brush Set for Dynamo (Ref: 261483)
2. Thermostat 74 degrees (Ref: 532453)
3. Bottom Hose Series 2A (Ref: 530585)
Split Pin - Shocker Retention
Axle Bump Rubber Ref: 241380
Application: Series 1 1954-1958, Series 2 and Series 3.
Description: Replacement axle bump rubber. Mounting holes at 4 1/8" centres (105mm)

Price: 2.50 (3.00 Including VAT at 20%)



Axle Bump Rubber
Engine Mount Front Ref: NRC2054
Application: Series 1, 2 & 3.
Description: Replacement front engine mount for petrol engines. Studs take M8 nuts.
Approximate dimensions: Hight (excluding studs) 38mm(1.5"), overall diameter 64mm(2.5").
Original part number: 526777

Price: 2.50 (3.00 Including VAT at 20%)



Engine Mount Front
Retainer for Check Strap Ref: 219574
Application: Series 1 models.

Description: Reproduction retaining plate for check straps on rear axle.

Approximate dimensions: 11.1cm(4.4") x 3.8cm(1.5") x3mm(0.12"), holes 66mm(2.6") centres and 9.3mm(0.37") diameter,

Price: 4.81 (5.77 Including VAT at 20%)



Retainer for Check Strap
Digital Dispensary > LAND Rover Series One Parts > Land Rover Series One Suspension Parts
Page:   <<   <  1  2  3

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Steering Arm - Series 1

Steering Arm - Series 1

17.82

Application: Series 1 models 1948 to 1956 approx.

Description: Drop arm for early type steering box. This arm is held in place with a pinch bolt.

Approximate dimensions: Overall length 17.4cm(6.9")

find out more

'D' Washer - Pedal Shaft

'D' Washer - Pedal Shaft

0.96

Application: Series 1 models.

Description: 'D' washer for support shaft for brake and clutch pedals.

Approximate dimensions: Outside diameter 38mm(1.5"), thickness 3mm(1/8").


find out more

Fixing Kit for Manifolds - Metric

Fixing Kit for Manifolds - Metric

12.83

Application: Series 3 from 1980 with 2.25 litre petrol engine.

Description: Metric threaded kit of fixings to hold manifolds to cylinder head. Kit includes 6 bolts, 2 set screws, 3 studs, 9 plain washers, 11 lock washers, 3 nuts, 2 clamps and 2 lockers

find out more

Fixing Kit for Manifolds - Imperial

Fixing Kit for Manifolds - Imperial

10.20

Application: Series 2 and Series 3 to approx 1980 with 2.25 litre petrol engine.

Description: Imperial (inch) threaded kit of fixings to hold manifolds to cylinder head. Kit includes 6 bolts, 2 set screws, 3 studs, 9 plain washers, 11 lock washers, 3 nuts, 2 clamps and 2 lockers

find out more

Shackle Plate Rear

Shackle Plate Rear

11.16

Application: Series1 1948 to 1953.

Description: Shackle plate for rear springs with plain 9/16" diameter holes.

Approximate dimensions: Length 113mm(4.45"), width 38mm(1.5"), thickness 9.2mm(0.36")
find out more

Shackle Plate Rear

Shackle Plate Rear

13.02

Application: Series 1 1948 to 1953.

Description: Shackle plate for rear springs with 1/2"BSF threaded holes.

Approximate dimensions: Length 113mm(4.45"), width 38mm(1.5"), thickness 9.2mm(0.36")

find out more

Clip for 3/16" Brake Pipe

Clip for 3/16

1.39

Application: Series1, Series2/2A and Series3 models.

Description: Reproduction stainless steel clip for brake pipes. Intended for 3/16" pipe, but will work with 1/4" diameter pipe also.

Approximate dimensions: Length 20mm(0.8"), width 10mm(3/8"), height 5mm(0.2"), hole diameter 4mm(0.16").

find out more

Rear End-plate for Cylinder Head

Rear End-plate for Cylinder Head

97.66

Application: Series 1 petrol models 1948 to 1958, Series 2 models with 2 litre petrol engine.

Description: Reproduction end plate in cast aluminium with mounting aperature for thermo switch.

Approximate dimensions: Length 91mm(3.6"), height 84mm(3.3"), depth 18.4mm(0.72")

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -