Digital Dispensary

Product Sections


Best Sellers

Air Hose Series 1

Air Hose Series 1

69.60

Application: Series 1 with the 2 litre petrol engine from 1955 to 1958. Also Series 2 with the 2 litre engine.

Description: Reproduction air hose between air filter and carburettor.

Approximate dimensions: Overall length 24.5cm(9.6"), internal diameter 50.8mm(2").

find out more

Brake Master Cylinder and Conversion Kit

Brake Master Cylinder and Conversion Kit

97.50

Application: Series 1 from 1954 to 1958 with 3/16" diameter brake pipes.

Description: Early Series 2 brake master cylinder and conversion kit to allow it to be fitted to Series 1.


Back in stock at long last.

find out more

Nut and Bolt Kit for Propshafts

Nut and Bolt Kit for Propshafts

2.40

Application: Series 1, Series 2, Series 2A, Series 3 Land Rovers. All Defenders, Classic Range Rover, Range Rover 2 (38A), Discovery 1 and Discovery 2.

Description: Set of four 3/8UNF x 1.125" long bolts plus four short nyloc nuts.
find out more

Spider Bypass Link Cable

Spider Bypass Link Cable

11.59

Application: Discovery 1 1995 to 1998 approx, where fitted with original immobilisation and alarm system.
Description: Small wiring harness to bypass the "spider" .
See http://forums.lr4x4.com/index.php?showtopic=86 for full instructions on how to fit.
find out more

Series1, 2 & 3 Wheel Bearing Kit with Japanese Bearings

Series1,  2 & 3 Wheel Bearing Kit with Japanese Bearings

39.94

Application: Series 1 front axle only, Series 2, Series 2A and Series 3 to 1980. Where inner bearing is larger than outer bearing. Covers both long and short wheel base vehicles, suitable for either front or rear wheel.

Description: Kit of parts to service one wheel hub. Kit comprises inner and outer Japanese manufactured wheel bearings (NTN or similar brand), Gaco inner seal, flange gasket, hub nut locker, felt outer seal, 'o' ring outer seal and split pin.

find out more

Land on Stub Axle for Hub Seal

Land on Stub Axle for Hub Seal

9.58

Application: Series 1 front axle, Series 2 and Series 3 upto 1980.
Description: Replaceable land or spacer on stub axle that the wheel hub seal runs on.
Approximate dimensions: outside diameter 2 5/8"(55.8mm), inside diameter 1 13/16" (46mm), depth 7/16"(11mm).
Original part number: 217351
find out more

Pack of 10 3/8" BSF Plain Nuts

Pack of 10 3/8

1.56

Pack of ten 3/8"BSF plain nuts, 19/32"(15mm) across flats, 0.35"(8.8mm) high.
Original part number 2827
find out more

Engine Mount Pair Series One 80"

Engine Mount Pair Series One 80

107.88

Application: 80" wheelbase Series 1 1948 to 1953.

Description: Pair of mounts for engine block with mounting bolts 2&15/16" long.

find out more

Olive for Vacuum Pipe

Olive for Vacuum Pipe

0.84

Application: Series 1 and Series2 with Solex 32PBI carburettor.

Description: Brass olive for use with 1/8" copper pipe.

Approximate dimensions: Length 4.7mm(0.19"), outside diameter 4.7mm(0.19"), internal dimater 1/8"(3.2mm).

find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > LAND Rover Series One Parts > Land Rover Series One Gearbox Parts
Page:   <<   <  1  2  3  4  5  ...   >   >>
Spring - Selector Shaft Reverse Ref: 56102
Application: All Series 1 and Series 2& 3 with 4 or 6 cylinder engines.
Description: Spring for detent on reverse selector shaft. Yellow stripe is for identification.
Approximate dimensions: free length 32mm (1.26"), diameter 9.4mm (0.37").

Price: 0.79 (0.95 Including VAT at 20%)




People who bought this item also bought:
1. Spring - Selectors Forward Gears (Ref: 3649)
2. Sleeve for 1st & 2nd Gears (Ref: 571218D)
3. Gasket Set for Series Gearboxes (Ref: 600603D)
Spring - Selector Shaft Reverse
Clutch Release Bearing Series1 & 2A Ref: STC1130D
Application: Series1, Series2 and 2A part syncromesh gearbox with the unsealed clutch release mechanism. This is the usual setup on the Series 2 and 2A. This bearing is also used in various gearboxes and transfer boxes.

Description: Single row ball bearing by FAG, type 6207.C3.

Approximate dimensions: overall diameter 72mm (2.83"), inside diameter 35mm (1.38"), thickness 17mm (0.67").

Price: 8.50 (10.20 Including VAT at 20%)



Clutch Release Bearing Series1 & 2A
Clutch Withdrawal Sleeve Ref: 231074
Application: Series 1 & 2 with part syncromesh gearbox.
Description: Clutch withdrawal sleeve, mounted in nose of gearbox.

Price: 60.45 (72.54 Including VAT at 20%)



Clutch Withdrawal Sleeve
Bush Cross-Shaft Clutch Release Ref: 214794
Application: Series 1 & 2 with part syncromesh gearbox.
Description: Bronze bush for cross-shaft of clutch release mechanism. Stil in original packing and grease.

Price: 6.03 (7.24 Including VAT at 20%)



Bush Cross-Shaft Clutch Release
Knob for Main Gear Lever Ref: 217735
Application: Series 1 and early Series2/2A.

Description: Reproduction black gear knob for main gear lever.

Approximate dimensions: Overall diameter 47mm(1.85"), height 37.5mm(1.48"), mounting thread 1/2" BSF.

Price: 36.76 (44.11 Including VAT at 20%)



Knob for Main Gear Lever
Lock Nut 1/2" BSF Ref: 3905
Application: Series1 and Series2.

Description: Lock nut (or half nut) 1/2"BSF. Used as lock nut for main gear lever and possibly elsewhere on these models.

Approximate dimensions: 13/16" across flats(20.6mm), 7.3mm(0.29") deep.

Price: 1.95 (2.34 Including VAT at 20%)




People who bought this item also bought:
1. Spring for Main Gear Lever (Ref: 219723)
2. Screw for retaining Brake Drums (Ref: 1510)
3. Pack of 10 1/2" BSF Nyloc Nuts (Ref: 251324x10)
Lock Nut 1/2
Locating Peg Main Gear Lever Ref: 507447
Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Threaded peg for locating main gear lever in it's housing.
Approximate dimensions: overall length 11.7mm.

Price: 1.43 (1.72 Including VAT at 20%)




People who bought this item also bought:
1. Lock Nut 1/2" BSF (Ref: 3905)
2. Circlip Spring Retention Main Gear Lever (Ref: 219797)
3. Spring for Main Gear Lever (Ref: 219723)
Locating Peg Main Gear Lever
Housing for Main Gear Lever Ref: 219714
Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Cast aluminium housing for main gear lever.

Price: 21.00 (25.20 Including VAT at 20%)



Housing for Main Gear Lever
Spherical Seat for Main Gear Lever Ref: 219721
Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Seat for main ball of gear lever. Sits inside housing 219714.
Approximate dimensions: outside diameter 47mm (1.85")

Price: 2.90 (3.48 Including VAT at 20%)




People who bought this item also bought:
1. Locating Peg Main Gear Lever (Ref: 507447)
2. Lock Nut 1/2" BSF (Ref: 3905)
3. Circlip Spring Retention Main Gear Lever (Ref: 219797)
Spherical Seat for Main Gear Lever
Retaining Plate for Spring Ref: 219722
Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Retaining plate for spring inside main gear lever housing. Effectively this is a flat washer.
Approximate dimensions: outside diameter 47mm (1.85"£)

Price: 0.60 (0.72 Including VAT at 20%)



Retaining Plate for Spring
Digital Dispensary > LAND Rover Series One Parts > Land Rover Series One Gearbox Parts
Page:   <<   <  1  2  3  4  5  ...   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Shackle Plate Rear

Shackle Plate Rear

11.16

Application: Series1 1948 to 1953.

Description: Shackle plate for rear springs with plain 9/16" diameter holes.

Approximate dimensions: Length 113mm(4.45"), width 38mm(1.5"), thickness 9.2mm(0.36")
find out more

Shackle Plate Rear

Shackle Plate Rear

13.02

Application: Series 1 1948 to 1953.

Description: Shackle plate for rear springs with 1/2"BSF threaded holes.

Approximate dimensions: Length 113mm(4.45"), width 38mm(1.5"), thickness 9.2mm(0.36")

find out more

Clip for 3/16" Brake Pipe

Clip for 3/16

1.39

Application: Series1, Series2/2A and Series3 models.

Description: Reproduction stainless steel clip for brake pipes. Intended for 3/16" pipe, but will work with 1/4" diameter pipe also.

Approximate dimensions: Length 20mm(0.8"), width 10mm(3/8"), height 5mm(0.2"), hole diameter 4mm(0.16").

find out more

Rear End-plate for Cylinder Head

Rear End-plate for Cylinder Head

97.66

Application: Series 1 petrol models 1948 to 1958, Series 2 models with 2 litre petrol engine.

Description: Reproduction end plate in cast aluminium with mounting aperature for thermo switch.

Approximate dimensions: Length 91mm(3.6"), height 84mm(3.3"), depth 18.4mm(0.72")

find out more

Thermo Switch Series 1

Thermo Switch Series 1

80.92

Application: Series 1 petrol engines from 1948 to 1958.

Description: Reproduction switch for choke warning lamp. Supplied with mounting screws and lock washers.

Approximate dimensions: Length 64mm(2.52"), height 39.6mm(1.56"), depth including terminal 33mm(1.3")

find out more

Gaskets and Fitting Kit

Gaskets and Fitting Kit

9.26

Application: Series2A and Series3 models with 2.25litre petrol engine.

Description: Kit containing gaskets, studs and nuts for fitting of new exhaust manifold.

find out more

Exhaust Manifold

Exhaust Manifold

50.63

Application: Series2A and Series3 models with 2.25 petrol engine.

Description: Reproduction cast iron exhaust manifold

find out more

Coupling Repair Kit for MT82 Gearbox

Coupling Repair Kit for MT82 Gearbox

179.50

Application: Defender models 2007 to end of production;

Description: Kit to repace coupling shaft between MT82 gearbox and LT230 transfer box. Kit includes shaft, collar, bolt, 2 seals, spring ring, high temperature grease sachet and retaining clip.

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -