Digital Dispensary

Product Sections


Best Sellers

Air Hose Series 1

Air Hose Series 1

69.60

Application: Series 1 with the 2 litre petrol engine from 1955 to 1958. Also Series 2 with the 2 litre engine.

Description: Reproduction air hose between air filter and carburettor.

Approximate dimensions: Overall length 24.5cm(9.6"), internal diameter 50.8mm(2").

find out more

Brake Master Cylinder and Conversion Kit

Brake Master Cylinder and Conversion Kit

97.50

Application: Series 1 from 1954 to 1958 with 3/16" diameter brake pipes.

Description: Early Series 2 brake master cylinder and conversion kit to allow it to be fitted to Series 1.


Back in stock at long last.

find out more

Nut and Bolt Kit for Propshafts

Nut and Bolt Kit for Propshafts

2.40

Application: Series 1, Series 2, Series 2A, Series 3 Land Rovers. All Defenders, Classic Range Rover, Range Rover 2 (38A), Discovery 1 and Discovery 2.

Description: Set of four 3/8UNF x 1.125" long bolts plus four short nyloc nuts.
find out more

Spider Bypass Link Cable

Spider Bypass Link Cable

11.59

Application: Discovery 1 1995 to 1998 approx, where fitted with original immobilisation and alarm system.
Description: Small wiring harness to bypass the "spider" .
See http://forums.lr4x4.com/index.php?showtopic=86 for full instructions on how to fit.
find out more

Series1, 2 & 3 Wheel Bearing Kit with Japanese Bearings

Series1,  2 & 3 Wheel Bearing Kit with Japanese Bearings

39.94

Application: Series 1 front axle only, Series 2, Series 2A and Series 3 to 1980. Where inner bearing is larger than outer bearing. Covers both long and short wheel base vehicles, suitable for either front or rear wheel.

Description: Kit of parts to service one wheel hub. Kit comprises inner and outer Japanese manufactured wheel bearings (NTN or similar brand), Gaco inner seal, flange gasket, hub nut locker, felt outer seal, 'o' ring outer seal and split pin.

find out more

Land on Stub Axle for Hub Seal

Land on Stub Axle for Hub Seal

9.58

Application: Series 1 front axle, Series 2 and Series 3 upto 1980.
Description: Replaceable land or spacer on stub axle that the wheel hub seal runs on.
Approximate dimensions: outside diameter 2 5/8"(55.8mm), inside diameter 1 13/16" (46mm), depth 7/16"(11mm).
Original part number: 217351
find out more

Pack of 10 3/8" BSF Plain Nuts

Pack of 10 3/8

1.56

Pack of ten 3/8"BSF plain nuts, 19/32"(15mm) across flats, 0.35"(8.8mm) high.
Original part number 2827
find out more

Engine Mount Pair Series One 80"

Engine Mount Pair Series One 80

107.88

Application: 80" wheelbase Series 1 1948 to 1953.

Description: Pair of mounts for engine block with mounting bolts 2&15/16" long.

find out more

Olive for Vacuum Pipe

Olive for Vacuum Pipe

0.84

Application: Series 1 and Series2 with Solex 32PBI carburettor.

Description: Brass olive for use with 1/8" copper pipe.

Approximate dimensions: Length 4.7mm(0.19"), outside diameter 4.7mm(0.19"), internal dimater 1/8"(3.2mm).

find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > LAND Rover Series One Parts > Land Rover Series One Gearbox Parts
Page:  1  2  3  4  5  ...   >   >>
Gasket Set for Series Gearboxes Ref: 600603D
Application: Series 1, Series 2 & 3 with 4 or 6 cylinder engines.
Description: Set of replacement gaskets for main and transfer gearboxes. Does NOT include seals.

Price: 3.50 (4.20 Including VAT at 20%)




People who bought this item also bought:
1. Oil Seal Set for Gearbox (Ref: 600603KIT)
2. Sleeve for 1st & 2nd Gears (Ref: 571218D)
3. Spring - Selectors Forward Gears (Ref: 3649)
Gasket Set for Series Gearboxes
Oil Seal Set for Gearbox Ref: 600603KIT
Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.

Price: 11.42 (13.70 Including VAT at 20%)




People who bought this item also bought:
1. Gasket Set for Series Gearboxes (Ref: 600603D)
2. Sleeve for 1st & 2nd Gears (Ref: 571218D)
3. Spring - Selectors Forward Gears (Ref: 3649)
Oil Seal Set for Gearbox
Bearing First Motion Shaft Ref: 55714=
Application: Series 1, Series 2 & 3 with 4 or 6 cylinder engines.

Description: Bearing for 1st motion shaft (input shaft) of gearbox. This is a Japanese sourced bearing, KSM or similar - not SKF as pictured.
Bearing number: RLS12.

Approximate dimensions: outside diameter 3.25" (82.6mm), inside diameter 1.5" (38mm), thickness 0.75" (19mm).

Price: 16.97 (20.36 Including VAT at 20%)




People who bought this item also bought:
1. Bearing First Motion Shaft (Ref: 6397)
2. Gasket Set for Series Gearboxes (Ref: 600603D)
3. Thrust Washer (Ref: 576735)
Bearing First Motion Shaft
Bearing First Motion Shaft Ref: 55714D
Application: Series 1, Series 2 & 3 with 4 or 6 cylinder engines.

Description: Bearing for 1st motion shaft (input shaft) of gearbox. This is a replacement bearing - not SKF as pictured.
Bearing number: RLS12.

Approximate dimensions: outside diameter 3.25" (82.6mm), inside diameter 1.5" (38mm), thickness 0.75" (19mm).

Price: 5.00 (6.00 Including VAT at 20%)




People who bought this item also bought:
1. Bearing Layshaft Rear (Ref: RTC1412D)
2. Spigot Bush (Ref: LFB500050)
3. Bearing First Motion Shaft (Ref: 6397)
Bearing First Motion Shaft
Bearing First Motion Shaft Ref: 6397
Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.

Description: OEM caged roller bearing between first motion shaft and main shaft with 10 rollers.. Made in the EU.

Approximate dimensions: Cage length 23.6mm(0.93"), rollers 6mm diameter, 19.4mm long.

Price: 4.55 (5.46 Including VAT at 20%)




People who bought this item also bought:
1. Gasket Set for Series Gearboxes (Ref: 600603D)
2. Sleeve for 1st & 2nd Gears (Ref: 571218D)
3. Mainshaft Nut (Ref: 217477)
Bearing First Motion Shaft
Bearing Mainshaft Rear Ref: 1645
Application: Series 1, Series 2 and Series 3 with either 4 or 6 cylinder engine.

Description: OEM boxed bearing for rear of mainshaft on both part syncromesh and full syncromesh gearboxes. Bearing number is 6307C3 and is a single row ball bearing.

Approximate dimensions: Outside diameter 80mm(3.15"), inside diameter 35mm(1.38"), thickness 21mm(0.83")

Price: 11.95 (14.34 Including VAT at 20%)




People who bought this item also bought:
1. Bearing First Motion Shaft (Ref: 6397)
2. Gasket Set for Series Gearboxes (Ref: 600603D)
3. Thrust Washer (Ref: 576735)
Bearing Mainshaft Rear
Roller Bearing - Mainshaft to Rear Cover Plate Ref: 217478
Application: Series 1, Series 2, Series 2A and Series 3.

Description: Needle roller bearing in steel cage for rear of mainshaft where it is supported in cover plate to rear of transfer case.

Approximate dimensions: Outside diameter 28mm(1.1"), inside diameter 19.5mm(0.75"), length 24mm(0.95").


Price: 26.82 (32.18 Including VAT at 20%)




People who bought this item also bought:
1. Bearing Layshaft Rear (Ref: RTC1412D)
2. Spigot Bush (Ref: LFB500050)
3. Bearing First Motion Shaft (Ref: 6397)
Roller Bearing - Mainshaft to Rear Cover Plate
Bearing Layshaft Front Ref: 576207
Application: Series1 and Series2 to suffix 'A' gearboxes.

Description: Original equipment specification single row ball bearing for front of layshaft.

Approximate dimensions: Outside diameter 2"(50.8mm), inside diameter 3/4"(19mm), thickness 19/32"(15mm)

Previous part numbers: 09962, 9962.

Price: 22.50 (27.00 Including VAT at 20%)



Bearing Layshaft Front
Bearing Layshaft Front - Replacement Ref: 576207D
Application: Series1 and Series2 to suffix 'A' gearboxes.

Description: Replacement single row ball bearing for front of layshaft.

Approximate dimensions: Outside diameter 2"(50.8mm), inside diameter 3/4"(19mm), thickness 19/32"(15mm)

Previous part numbers: 09962, 9962.

Price: 6.50 (7.80 Including VAT at 20%)



Bearing Layshaft Front - Replacement
Bearing Layshaft Rear Ref: RTC1412D
Application: Series1, Series2, Series2A and Series3 with LT76 gearbox.

Description: Replacement single row roller bearing for rear of layshaft. Bearing number CFL-7.

Approximate dimensions: Outside diameter 2"(50.8mm), inside diameter 7/8"(22mm), thickness 9/16"(14.3mm).

Previous part number: 55715


Price: 6.05 (7.26 Including VAT at 20%)




People who bought this item also bought:
1. Spigot Bush (Ref: LFB500050)
2. Bearing First Motion Shaft (Ref: 6397)
3. Oil Seal Set for Gearbox (Ref: 600603KIT)
Bearing Layshaft Rear
Digital Dispensary > LAND Rover Series One Parts > Land Rover Series One Gearbox Parts
Page:  1  2  3  4  5  ...   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Shackle Plate Rear

Shackle Plate Rear

11.16

Application: Series1 1948 to 1953.

Description: Shackle plate for rear springs with plain 9/16" diameter holes.

Approximate dimensions: Length 113mm(4.45"), width 38mm(1.5"), thickness 9.2mm(0.36")
find out more

Shackle Plate Rear

Shackle Plate Rear

13.02

Application: Series 1 1948 to 1953.

Description: Shackle plate for rear springs with 1/2"BSF threaded holes.

Approximate dimensions: Length 113mm(4.45"), width 38mm(1.5"), thickness 9.2mm(0.36")

find out more

Clip for 3/16" Brake Pipe

Clip for 3/16

1.39

Application: Series1, Series2/2A and Series3 models.

Description: Reproduction stainless steel clip for brake pipes. Intended for 3/16" pipe, but will work with 1/4" diameter pipe also.

Approximate dimensions: Length 20mm(0.8"), width 10mm(3/8"), height 5mm(0.2"), hole diameter 4mm(0.16").

find out more

Rear End-plate for Cylinder Head

Rear End-plate for Cylinder Head

97.66

Application: Series 1 petrol models 1948 to 1958, Series 2 models with 2 litre petrol engine.

Description: Reproduction end plate in cast aluminium with mounting aperature for thermo switch.

Approximate dimensions: Length 91mm(3.6"), height 84mm(3.3"), depth 18.4mm(0.72")

find out more

Thermo Switch Series 1

Thermo Switch Series 1

80.92

Application: Series 1 petrol engines from 1948 to 1958.

Description: Reproduction switch for choke warning lamp. Supplied with mounting screws and lock washers.

Approximate dimensions: Length 64mm(2.52"), height 39.6mm(1.56"), depth including terminal 33mm(1.3")

find out more

Gaskets and Fitting Kit

Gaskets and Fitting Kit

9.26

Application: Series2A and Series3 models with 2.25litre petrol engine.

Description: Kit containing gaskets, studs and nuts for fitting of new exhaust manifold.

find out more

Exhaust Manifold

Exhaust Manifold

50.63

Application: Series2A and Series3 models with 2.25 petrol engine.

Description: Reproduction cast iron exhaust manifold

find out more

Coupling Repair Kit for MT82 Gearbox

Coupling Repair Kit for MT82 Gearbox

179.50

Application: Defender models 2007 to end of production;

Description: Kit to repace coupling shaft between MT82 gearbox and LT230 transfer box. Kit includes shaft, collar, bolt, 2 seals, spring ring, high temperature grease sachet and retaining clip.

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -