Digital Dispensary

Product Sections


Best Sellers

Grommet - Brake Pipe Support

Grommet - Brake Pipe Support

0.31

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Grommet to support brake pipe on rear axle casing. Used with clip 56666.
Approximate dimensions: overall length 21.5mm(0.85"), inside diameter 7mm(0.3"), outside diameter 14.5mm(0.6")
find out more

Clip for brake pipe grommet

Clip for brake pipe grommet

0.61

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Clip for brake pipe support grommet 6860L. Used on rear axle casing on all Series models from 1954 to 1984.
Approximate dimensions: 11mm(7/16") wide, 34mm(1.3") long, mounting hole 5mm(0.2") diameter, internal diameter of clip when closed 13mm.
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Gasket Set for Series Gearboxes

Gasket Set for Series Gearboxes

4.20

Application: Series 1, Series 2 & 3 with 4 or 6 cylinder engines.
Description: Set of replacement gaskets for main and transfer gearboxes. Does NOT include seals.
find out more

Water Pump Series1 Petrol

Water Pump Series1 Petrol

51.00

Application: Series 1 1.6ltr & 2.0ltr petrol (gasolene) engines.

Description: Reproduction cast iron water pump, supplied with gaskets.
find out more

Gaiter for High/Low Gear Lever

Gaiter for High/Low Gear Lever

2.46

Application: Series 1, Series 2/2A and Series 3.

Description: Reproduction rubber gaiter for the high/low gear lever.

Approximate dimensions: Overall length 143mm, height 90mm.

find out more

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

13.70

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Copper Ring Water Pump to Thermostat Housing

Copper Ring Water Pump to Thermostat Housing

7.44

Application: Series One with 1.6 or 2 litre petrol engine. Series Two with 2 litre petrol engine.
Description: Copper ring to support 'O' ring between water pump and thermostat housing.
Approximate dimensions: outside diameter 16mm(0.63"), inside diameter 11mm(0.43"), height 7.5mm(0.3")
find out more

Wheel Stud for Series 1

Wheel Stud for Series 1

5.82

Application: All Series One models.

Description: Reproduction wheel stud for Series 1. Threaded 9/16"BSF. Use with nut 217361.

Approximate dimensions: Overall length 52mm(2"), short threaded end 12mm(0.47"), long threaded end 27.5mm(1.08"), land 12.5mm(0.5")

find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > LAND Rover Series One Parts > Land Rover Series One Engine Parts
Page:   <<   <  1  2  3  4  5  ...   >   >>
Genuine Oil Filter Element RTC3183 Ref: RTC3183
Application: Series1 2 litre petrol, S2A & S3 2.6 litre 6 cylinder petrol.

Approximate dimensions: 70mm diameter x 173mm long.

Price: 4.82 (5.78 Including VAT at 20%)




People who bought this item also bought:
1. Spark Plug Champion N5C (Ref: RTC3571)
2. Mounting Pad for Fuel Pump (Ref: 212557)
3. Mounting Bush for Fuel Pump (Ref: 212558)
Genuine Oil Filter Element RTC3183
Brass Olive 1/4" Pipe Ref: 230172
Application: Series 1 1600cc and early 2000cc engines.

Description: Brass olive for oil feed pipe to bypass oil filter.

Approximate dimensions: 1/4"(6.35mm) internal diameter, overall length 7mm(0.28")

Price: 1.36 (1.63 Including VAT at 20%)





Related products:
1. 25' Roll of Copper Brakepipe (Ref: ZZHCP014300)
Brass Olive 1/4
Brass Olive 5/16" Pipe Ref: 230173
Application: Series 1 1600cc and early 2000cc engines.

Description: Brass olive for oil return pipe from bypass oil filter.

Approximate dimensions: 5/16"(8.5mm) internal diameter, overall length 7mm(0.28")

Price: 1.03 (1.24 Including VAT at 20%)





Related products:
1. 5/16" diameter Copper Pipe - per inch (Ref: ZZHCP516)
Brass Olive 5/16
Gasket Water Pump S1 Ref: 9118
Application Series 1 1.6ltr &2.0Ltr petrol (gasolene) engine.
Description: Original cork gasket between water pump and cylinder block.

Price: 2.00 (2.40 Including VAT at 20%)




People who bought this item also bought:
1. Sealing Ring Water Pump to Cylinder Head (Ref: RTC1975)
2. Copper Ring Water Pump to Thermostat Housing (Ref: 9197)
3. 'O' Ring for Thermostat (Ref: 527235)
Gasket Water Pump S1
Gasket Cylinder Head End Plates Ref: 213811
Application: Series 1 1.6ltr & 2.0ltr petrol (gasolene) engines.
Description: Original cork gasket for cylinder head end plates.

Price: 2.98 (3.58 Including VAT at 20%)




People who bought this item also bought:
1. Sealing Ring Water Pump to Cylinder Head (Ref: RTC1975)
2. 'O' Ring for Thermostat (Ref: 527235)
3. Copper Ring Water Pump to Thermostat Housing (Ref: 9197)
Gasket Cylinder Head End Plates
Gasket By-pass Hose Ends Ref: 210419
Application: Series 1 1.6ltr & 2.0ltr petrol (gasolene) engines.
Description: Original gasket to water pump and cylinder head for end tubes of by-pass hose.

Price: 2.43 (2.92 Including VAT at 20%)




People who bought this item also bought:
1. Sealing Ring Water Pump to Cylinder Head (Ref: RTC1975)
2. Gasket Water Pump S1 (Ref: 9118)
3. Copper Washer Oil Feed Pipe (Ref: 232039)
Gasket By-pass Hose Ends
Gasket Oil Filter Housing to Block Ref: ERR3607
Application: Series 1 1.6 & 2.0 litre petrol, 2.0ltr diesel, Series 2 & 3 4 and 6 cylinder engines.
Description: Gasket between oil filter housing and cylinder block.
Original part number 272839.

Price: 0.93 (1.12 Including VAT at 20%)




People who bought this item also bought:
1. Inlet Valve (Ref: 233427)
2. Seal Kit for Brake Master Cylinder (Ref: ZZSP1975-5)
3. Sump Gasket Series 1 (Ref: 267780)
Gasket Oil Filter Housing to Block
Oil Pressure Switch Ref: 90519864
Application: Series 1 2.0ltr petrol & 2.0ltr diesel, S2&3 2.25ltr petrol & diesel.

Description: Oil pressure switch for oil pressure warning light.

Original part number 505152

Price: 3.83 (4.60 Including VAT at 20%)




People who bought this item also bought:
1. Radiator Cap 9lbs (Ref: RTC3610)
2. Pack of 10 3/8" BSF Plain Nuts (Ref: NH406041Lx10)
3. Banjo Bolt for Oil Feed Pipe (Ref: ETC4498)
Oil Pressure Switch
Gasket Inlet Pipe to Water Pump Ref: 213724
Application: Series 1 1.6ltr & 2.0ltr petrol (gasolene) engines.
Description: Reproduction gasket.

Price: 0.89 (1.07 Including VAT at 20%)




People who bought this item also bought:
1. Sealing Ring Water Pump to Cylinder Head (Ref: RTC1975)
2. Water Pump Series1 Petrol (Ref: 269974)
3. Yellow Knob - 4WD Gear lever (Ref: 232813)
Gasket Inlet Pipe to Water Pump
Banjo Bolt - Oil feed Ref: 218046
Application: Series 1 with 1600cc petrol engine.

Description: Longer version banjo bolt that passes through additional banjo union for oil pressure switch.

Approximate dimensions: Overall length including head 44.5mm(1.75"), diameter 9.5mm(3/8"), head 13mm(0.5") across flats.

Price: 5.27 (6.32 Including VAT at 20%)



Banjo Bolt - Oil feed
Digital Dispensary > LAND Rover Series One Parts > Land Rover Series One Engine Parts
Page:   <<   <  1  2  3  4  5  ...   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Steering Arm - Series 1

Steering Arm - Series 1

17.82

Application: Series 1 models 1948 to 1956 approx.

Description: Drop arm for early type steering box. This arm is held in place with a pinch bolt.

Approximate dimensions: Overall length 17.4cm(6.9")

find out more

'D' Washer - Pedal Shaft

'D' Washer - Pedal Shaft

0.96

Application: Series 1 models.

Description: 'D' washer for support shaft for brake and clutch pedals.

Approximate dimensions: Outside diameter 38mm(1.5"), thickness 3mm(1/8").


find out more

Fixing Kit for Manifolds - Metric

Fixing Kit for Manifolds - Metric

12.83

Application: Series 3 from 1980 with 2.25 litre petrol engine.

Description: Metric threaded kit of fixings to hold manifolds to cylinder head. Kit includes 6 bolts, 2 set screws, 3 studs, 9 plain washers, 11 lock washers, 3 nuts, 2 clamps and 2 lockers

find out more

Fixing Kit for Manifolds - Imperial

Fixing Kit for Manifolds - Imperial

10.20

Application: Series 2 and Series 3 to approx 1980 with 2.25 litre petrol engine.

Description: Imperial (inch) threaded kit of fixings to hold manifolds to cylinder head. Kit includes 6 bolts, 2 set screws, 3 studs, 9 plain washers, 11 lock washers, 3 nuts, 2 clamps and 2 lockers

find out more

Shackle Plate Rear

Shackle Plate Rear

11.16

Application: Series1 1948 to 1953.

Description: Shackle plate for rear springs with plain 9/16" diameter holes.

Approximate dimensions: Length 113mm(4.45"), width 38mm(1.5"), thickness 9.2mm(0.36")
find out more

Shackle Plate Rear

Shackle Plate Rear

13.02

Application: Series 1 1948 to 1953.

Description: Shackle plate for rear springs with 1/2"BSF threaded holes.

Approximate dimensions: Length 113mm(4.45"), width 38mm(1.5"), thickness 9.2mm(0.36")

find out more

Clip for 3/16" Brake Pipe

Clip for 3/16

1.39

Application: Series1, Series2/2A and Series3 models.

Description: Reproduction stainless steel clip for brake pipes. Intended for 3/16" pipe, but will work with 1/4" diameter pipe also.

Approximate dimensions: Length 20mm(0.8"), width 10mm(3/8"), height 5mm(0.2"), hole diameter 4mm(0.16").

find out more

Rear End-plate for Cylinder Head

Rear End-plate for Cylinder Head

97.66

Application: Series 1 petrol models 1948 to 1958, Series 2 models with 2 litre petrol engine.

Description: Reproduction end plate in cast aluminium with mounting aperature for thermo switch.

Approximate dimensions: Length 91mm(3.6"), height 84mm(3.3"), depth 18.4mm(0.72")

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -