Digital Dispensary

Product Sections


Best Sellers

Grommet - Brake Pipe Support

Grommet - Brake Pipe Support

0.31

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Grommet to support brake pipe on rear axle casing. Used with clip 56666.
Approximate dimensions: overall length 21.5mm(0.85"), inside diameter 7mm(0.3"), outside diameter 14.5mm(0.6")
find out more

Clip for brake pipe grommet

Clip for brake pipe grommet

0.61

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Clip for brake pipe support grommet 6860L. Used on rear axle casing on all Series models from 1954 to 1984.
Approximate dimensions: 11mm(7/16") wide, 34mm(1.3") long, mounting hole 5mm(0.2") diameter, internal diameter of clip when closed 13mm.
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Gasket Set for Series Gearboxes

Gasket Set for Series Gearboxes

4.20

Application: Series 1, Series 2 & 3 with 4 or 6 cylinder engines.
Description: Set of replacement gaskets for main and transfer gearboxes. Does NOT include seals.
find out more

Water Pump Series1 Petrol

Water Pump Series1 Petrol

51.00

Application: Series 1 1.6ltr & 2.0ltr petrol (gasolene) engines.

Description: Reproduction cast iron water pump, supplied with gaskets.
find out more

Gaiter for High/Low Gear Lever

Gaiter for High/Low Gear Lever

2.46

Application: Series 1, Series 2/2A and Series 3.

Description: Reproduction rubber gaiter for the high/low gear lever.

Approximate dimensions: Overall length 143mm, height 90mm.

find out more

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

13.70

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Copper Ring Water Pump to Thermostat Housing

Copper Ring Water Pump to Thermostat Housing

7.44

Application: Series One with 1.6 or 2 litre petrol engine. Series Two with 2 litre petrol engine.
Description: Copper ring to support 'O' ring between water pump and thermostat housing.
Approximate dimensions: outside diameter 16mm(0.63"), inside diameter 11mm(0.43"), height 7.5mm(0.3")
find out more

Wheel Stud for Series 1

Wheel Stud for Series 1

5.82

Application: All Series One models.

Description: Reproduction wheel stud for Series 1. Threaded 9/16"BSF. Use with nut 217361.

Approximate dimensions: Overall length 52mm(2"), short threaded end 12mm(0.47"), long threaded end 27.5mm(1.08"), land 12.5mm(0.5")

find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > LAND Rover Series One Parts > Land Rover Series One Engine Parts
Page:   <<   <  1  2  3  4  5  ...   >   >>
Shaft Distributor Drive Ref: 233681
Application: Series 1 with 1600cc engine 1949 to 1952?

Description: Drive shaft for distributor from oilpump shaft.

Approximate dimesions: Overall length 89.5mm(3.5")

Price: 19.80 (23.76 Including VAT at 20%)



Shaft Distributor Drive
Shaft Distributor Drive Ref: 267829
Application: Series 1 2litre and Series 2/3 2.6litre 6 cylinder engines.

Description: Drive shaft for distributor from oilpump shaft.

Approximate dimesions: Overall length 89.5mm(3.5")

Price: 37.20 (44.64 Including VAT at 20%)



Shaft Distributor Drive
Sleeve - Distributor Mounting Ref: 214047
Application: Series 1 petrol engines.

Description: Aluminium mounting tube with brass bush to lower end.

Approximate dimensions: overall length 19cm(7.5")

Price: 58.90 (70.68 Including VAT at 20%)



Sleeve - Distributor Mounting
Strainer - Oil Pump Ref: 266900
Application: Series 1 petrol engines.

Description: Strainer for pick up of oil pump.

Approximate dimensions: Overall diameter 14.7cm(5.8"), depth 2.8cm(1.1")

Price: 55.80 (66.96 Including VAT at 20%)



Strainer - Oil Pump
Rocker Cover Gasket Ref: 267781
Application: 1.6ltr and 2.0ltr petrol (gasolene) engines.

Description: Gasket for rocker cover to cylinder head.

Price: 6.43 (7.72 Including VAT at 20%)




People who bought this item also bought:
1. Gasket Side Cover (Ref: 267779)
2. Condenser S1 1.6 litre (Ref: 260070)
3. 'O' Ring for Thermostat (Ref: 527235)
Rocker Cover Gasket
Timing Chain - AE boxed Ref: ETC4499
Application: Series 1 1.6ltr & 2ltr petrol engines, Series 2&3 2.25ltr petrol & diesel engines.
Description: Duplex timing chain with 78 links and pitch of 3/8". From Federal Mogul as an AE product.
Original part number: 09156

Price: 10.45 (12.54 Including VAT at 20%)




People who bought this item also bought:
1. Main Bearing Set - Crankshaft (Ref: RTC2626)
2. Big End Set - .010" undersize (Ref: RTC173010)
3. Spigot Bush (Ref: LFB500050)
Timing Chain - AE boxed
Gasket Side Cover Ref: 267779
Application: 1600 & 2000cc petrol (gasolene) engines.
Description: Gasket between side cover and cylinder block.

Price: 3.44 (4.13 Including VAT at 20%)




People who bought this item also bought:
1. Sealing Ring Water Pump to Cylinder Head (Ref: RTC1975)
2. Rocker Cover Gasket (Ref: 267781)
3. Gasket Set for Series Gearboxes (Ref: 600603D)
Gasket Side Cover
Oil Seal between Crankshaft and Front Cover Ref: ERR6490
Application: S1 1600 & 2000 petrol, 2ltr diesel, Series 2 & 3 4 and 6 cylinder engines, 200Tdi and 300TDi.
Description: Oil seal by Corteco for engine front cover.
Approximate dimensions: outside diameter 63.5mm (2.5"), thickness 10mm (3/8").
Original part number 213744.

Price: 3.65 (4.38 Including VAT at 20%)




People who bought this item also bought:
1. Main Bearing Set - Crankshaft (Ref: RTC2626)
2. Spigot Bush (Ref: LFB500050)
3. Big End Set - .010" undersize (Ref: RTC173010)
Oil Seal between Crankshaft and Front Cover
Rear Oilseal for Crankshaft Ref: 275807
Application: Series 1 2.0 litre petrol engine from 1955 - 1958, Series 2 2.0 litre petrol engine from 1958 to 1961.

Description: Reproduction pair of half seals for rear of crankshaft. Bonded seals onto aluminium carriers.

Approximate dimensions: Overall diameter 14cm( 5.5")

Price: 77.50 (93.00 Including VAT at 20%)



Rear Oilseal for Crankshaft
Oil Filter Conversion Ref: 216322CONV
Application: Series One 1948 to 1954.

Description: Conversion kit to replace original bypass type oil filter with screw-on type filter. The filter mounting head looks like original filter from above, but takes an easily replacable modern screw-on filter. This unit will take many different filter elements - see fitting instructions. However one that we stock that fits nicely is LPX100590M.


Price: 151.90 (182.28 Including VAT at 20%)





Related products:
1. Replacement Alternative to LPX100590 (Ref: LPX100590M)
Oil Filter Conversion
Digital Dispensary > LAND Rover Series One Parts > Land Rover Series One Engine Parts
Page:   <<   <  1  2  3  4  5  ...   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Steering Arm - Series 1

Steering Arm - Series 1

17.82

Application: Series 1 models 1948 to 1956 approx.

Description: Drop arm for early type steering box. This arm is held in place with a pinch bolt.

Approximate dimensions: Overall length 17.4cm(6.9")

find out more

'D' Washer - Pedal Shaft

'D' Washer - Pedal Shaft

0.96

Application: Series 1 models.

Description: 'D' washer for support shaft for brake and clutch pedals.

Approximate dimensions: Outside diameter 38mm(1.5"), thickness 3mm(1/8").


find out more

Fixing Kit for Manifolds - Metric

Fixing Kit for Manifolds - Metric

12.83

Application: Series 3 from 1980 with 2.25 litre petrol engine.

Description: Metric threaded kit of fixings to hold manifolds to cylinder head. Kit includes 6 bolts, 2 set screws, 3 studs, 9 plain washers, 11 lock washers, 3 nuts, 2 clamps and 2 lockers

find out more

Fixing Kit for Manifolds - Imperial

Fixing Kit for Manifolds - Imperial

10.20

Application: Series 2 and Series 3 to approx 1980 with 2.25 litre petrol engine.

Description: Imperial (inch) threaded kit of fixings to hold manifolds to cylinder head. Kit includes 6 bolts, 2 set screws, 3 studs, 9 plain washers, 11 lock washers, 3 nuts, 2 clamps and 2 lockers

find out more

Shackle Plate Rear

Shackle Plate Rear

11.16

Application: Series1 1948 to 1953.

Description: Shackle plate for rear springs with plain 9/16" diameter holes.

Approximate dimensions: Length 113mm(4.45"), width 38mm(1.5"), thickness 9.2mm(0.36")
find out more

Shackle Plate Rear

Shackle Plate Rear

13.02

Application: Series 1 1948 to 1953.

Description: Shackle plate for rear springs with 1/2"BSF threaded holes.

Approximate dimensions: Length 113mm(4.45"), width 38mm(1.5"), thickness 9.2mm(0.36")

find out more

Clip for 3/16" Brake Pipe

Clip for 3/16

1.39

Application: Series1, Series2/2A and Series3 models.

Description: Reproduction stainless steel clip for brake pipes. Intended for 3/16" pipe, but will work with 1/4" diameter pipe also.

Approximate dimensions: Length 20mm(0.8"), width 10mm(3/8"), height 5mm(0.2"), hole diameter 4mm(0.16").

find out more

Rear End-plate for Cylinder Head

Rear End-plate for Cylinder Head

97.66

Application: Series 1 petrol models 1948 to 1958, Series 2 models with 2 litre petrol engine.

Description: Reproduction end plate in cast aluminium with mounting aperature for thermo switch.

Approximate dimensions: Length 91mm(3.6"), height 84mm(3.3"), depth 18.4mm(0.72")

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -