Digital Dispensary

Product Sections


Best Sellers

Brass Nut 5/16"BSF

Brass Nut 5/16

1.66

Application: Series1 exhaust manifold.

Description: Brass nut 5/16"BSF for holding downpipe to exhaust manifold.

Approximate dimensions: 3/8"(9.5mm) high, 17/32"(13.5mm) across flats.

find out more

Grommet - Brake Pipe Support

Grommet - Brake Pipe Support

0.31

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Grommet to support brake pipe on rear axle casing. Used with clip 56666.
Approximate dimensions: overall length 21.5mm(0.85"), inside diameter 7mm(0.3"), outside diameter 14.5mm(0.6")
find out more

Clip for brake pipe grommet

Clip for brake pipe grommet

0.61

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Clip for brake pipe support grommet 6860L. Used on rear axle casing on all Series models from 1954 to 1984.
Approximate dimensions: 11mm(7/16") wide, 34mm(1.3") long, mounting hole 5mm(0.2") diameter, internal diameter of clip when closed 13mm.
find out more

Ignition Coil

Ignition Coil

30.11

Application: Series 1 and Series 2.
Description: Reproduction ignition coil with screw in high tension connection. Supplied with acorn nut and split washer.
Approximate dimensions: Body diameter 54.8mm(2.2"), height 15cm(5.9")
find out more

Stud for Exhaust Manifold

Stud for Exhaust Manifold

1.85

Application: Series 1 1.6 and 2.0 litre, Series 2 2 litre.

Description: Stud to hold downpipe to exhaust manifold.

Approximate dimesions: 5/16"BSF threads to both ends, overall length 1.25"(32mm)

find out more

Black High Tension Lead, Copper Cored

Black High Tension Lead, Copper Cored

1.86

Application: Series One and Series Two
Description: Black high tension cable for spark plugs. 7mm(0.28") outside diameter with 19 strand copper core.

Sold by the metre
find out more

Rocker Cover Gasket

Rocker Cover Gasket

7.72

Application: 1.6ltr and 2.0ltr petrol (gasolene) engines.

Description: Gasket for rocker cover to cylinder head.
find out more

Gasket Exhaust Manifold to Down Pipe

Gasket Exhaust Manifold to Down Pipe

0.96

Application: Series 1, 2 & 3 four cylinder engines.
Description: Square flange gasket for exhaust. Used on various exhaust manifolds and on some pipe to pipe exhaust joints.
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > BOOKS and Publications > Other Technical Titles
The Essential Towing Handbook Ref: ZZBOOKK20228
Towing Roadcraft, the essential towing handbook
from The Police Foundation and The Stationery Office.
The Essential Towing Handbook is the definitive guide to towing in the UK. Whether you are towing for the first time or are an experienced tower who needs to know about recent legislation, this book is for you. It provides a wealth of helpful and important advice to help keep you safe and on the right side of the law.
Softback, 5.8" x 8.3", 196 pages with numerous diagrams

Price: 9.99



The Essential Towing Handbook
Driving Abroad SKILLS - ADVICE- SAFETY - LAWS Ref: ZZBOOKL7803
Driving Abroad SKILLS - ADVICE - SAFETY - LAWS
by Robert Davies. Published by Haynes in association with the Institute of Advanced Motorists.
Driving Abroad gives advice on the techniques needed to stay safe on foreign roads, including tips on coping with extreme weather and road conditions. There's vital information on local motoring regulations, unusual driving habits, and documents and accessories you must by law take with you. No-one who drives abroad can afford to be without this guide.
Softback 5.2" x 8.7", 208 pages plus numerous tables, illustrations and colour photos.

Price: 12.99



Driving Abroad SKILLS - ADVICE- SAFETY - LAWS
The Driving Manual Ref: ZZBOOKK17820
The Driving Manual from The Driving Standards Agency.
Essential reference book for all motorists and instructors regardless of experience. Aimed at UK situation, but much there for were ever you live.
Sections include - The Driver & the Law, Manoeuvering, Defensive Driving, All Weather Driving, Breakdowns, Towing, European Driving.
Soft-back book 5.8" x 8.3", 345 pages.

Price: 12.99



The Driving Manual
ROADCRAFT - The Essential Police Driver's Manual Ref: ZZBOOKK08587
'Roadcraft' is the handbook for police driver training in the UK. It is also the handbook for all other advanced drivers concerned about safety.
Sections on Technique, Safety, Awareness and Skills.
Carries on where 'The Driving Manual' leaves off.
Soft-back book 5.8" x 8.3", 177 pages.

Price: 13.99



ROADCRAFT - The Essential Police Driver's Manual
Winching in Safety Ref: SMR699MI
Winching in Safety is an official Land Rover publication.
Covers; winching in safety, techniques, care of equipment plus specifics on Land Rover approved winches.
Soft-back book 5.5" x 8.2", 100 pages.

Price: 9.85



Winching in Safety
Overhaul Manual for 300TDI, R380 and LT230T Ref: LRL0070ENG
Three overhaul manuals bound together covering;
the 300TDi engine - application: Defender 1994 to 1999, Discovery 1 1994 to 1999, Range Rover Classic 1994 to 1995.
the R380 gearbox - application: Defender 1994 onwards, Discovery 1 1994 to 1999, Range Rover Classic 1994 to 1995.
the LT230T transfer box - application: Defender 1989 onwards, Discovery 1 1989 to 1999.
Soft-back book 8.3" x 11.5", 183 pages

Price: 17.95



Overhaul Manual for 300TDI, R380 and LT230T
Digital Dispensary > BOOKS and Publications > Other Technical Titles

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Lever Arm for 4WD Select

Lever Arm for 4WD Select

15.80

Application: Series 1 to 1955.

Description: Lever arm with bronze bush to middle hole for selection of four wheel drive in high ratio.

Approximate dimensions: Overall length 116mm(4.6"), width 15.5mm(0.61"), thickness 6mm(0.24"), distance from centre of bushed hole to centre of slotted hole 36mm(1.42"), distance from centre of bushed hole to other hole is 68mm(2.67")

find out more

Olive for Vacuum Pipe

Olive for Vacuum Pipe

0.84

Application: Series 1 and Series2 with Solex 32PBI carburettor.

Description: Brass olive for use with 1/8" copper pipe.

Approximate dimensions: Length 4.7mm(0.19"), outside diameter 4.7mm(0.19"), internal dimater 1/8"(3.2mm).

find out more

Male Union for Vacuum Pipe

Male Union for Vacuum Pipe

2.40

Application: Series 1 and Series 2A.

Description: Brass male union for 1/8" copper pipe. Threaded to fit Solex 32PBI.

Aproximate dimensions: Length 10mm(0.39"), internal diameter 1/8"(3.2mm), hex 9mm(0.35") across flats, thread 1/4"BSF.

find out more

Grommet for vacuum pipe

Grommet for vacuum pipe

3.83

Application: Series 1 and Series 2A.

Description: Split rubber grommet for us with 214228 retaining clip. Used on 1/8" diameter copper vacuum pipe.

Approximate dimensions: Length 17mm(0.67"), internal diameter 3mm(1/8"), overall diameter 9mm(0.35")

find out more

Retaining Clip for Vacuum Pipe

Retaining Clip for Vacuum Pipe

2.78

Application: Series 1 and Series 2A.

Description: Retaining clip for copper vacuum pipe for advance and retard.

Approximate dimensions: 41.5mm(1.6") x 13mm(0.5") x 9mm(0.35"). Mounting hole 7mm(0.28")

find out more

Installer Oil Seal

Installer Oil Seal

33.79

Application: Evoque and Freelander 2.

Description: Installer for bellhousing differential oil seal. Use with 307-520.

Approximate dimensions: Overall diameter 80mm(3.15"), inside diameter 54mm(2.13"), height 48.5mm(1.9").

find out more

Installer Oilseal

Installer Oilseal

155.89

Application: Evoque and Freelander 2.

Description: Installer for quillshaft oil seal. Use with 307-520.

Approximate dimensions: Overall diameter 80mm(3.15"), height 64mm(2.52").


find out more

Pinion Bearing for Salisbury Differential

Pinion Bearing for Salisbury Differential

12.37

Application: Series 3 Long Wheel Base and Defender 110 models with rear Salisbury axle.

Descrtiption: Timken/Japanese sourced outer pinion taper roller bearing for Salisbury differentials.

Approximate dimensions: Outside diameter 2.85"(72.3mm), inside diameter 1 3/8"(34.9mm), depth 26.7mm(1.05")

Bearing numbers: HM88649/ HM88610

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -