Digital Dispensary

Product Sections


Best Sellers

Grommet - Brake Pipe Support

Grommet - Brake Pipe Support

0.31

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Grommet to support brake pipe on rear axle casing. Used with clip 56666.
Approximate dimensions: overall length 21.5mm(0.85"), inside diameter 7mm(0.3"), outside diameter 14.5mm(0.6")
find out more

Clip for brake pipe grommet

Clip for brake pipe grommet

0.61

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Clip for brake pipe support grommet 6860L. Used on rear axle casing on all Series models from 1954 to 1984.
Approximate dimensions: 11mm(7/16") wide, 34mm(1.3") long, mounting hole 5mm(0.2") diameter, internal diameter of clip when closed 13mm.
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Gasket Set for Series Gearboxes

Gasket Set for Series Gearboxes

4.20

Application: Series 1, Series 2 & 3 with 4 or 6 cylinder engines.
Description: Set of replacement gaskets for main and transfer gearboxes. Does NOT include seals.
find out more

Water Pump Series1 Petrol

Water Pump Series1 Petrol

51.00

Application: Series 1 1.6ltr & 2.0ltr petrol (gasolene) engines.

Description: Reproduction cast iron water pump, supplied with gaskets.
find out more

Gaiter for High/Low Gear Lever

Gaiter for High/Low Gear Lever

2.46

Application: Series 1, Series 2/2A and Series 3.

Description: Reproduction rubber gaiter for the high/low gear lever.

Approximate dimensions: Overall length 143mm, height 90mm.

find out more

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

13.70

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Copper Ring Water Pump to Thermostat Housing

Copper Ring Water Pump to Thermostat Housing

7.44

Application: Series One with 1.6 or 2 litre petrol engine. Series Two with 2 litre petrol engine.
Description: Copper ring to support 'O' ring between water pump and thermostat housing.
Approximate dimensions: outside diameter 16mm(0.63"), inside diameter 11mm(0.43"), height 7.5mm(0.3")
find out more

Wheel Stud for Series 1

Wheel Stud for Series 1

5.82

Application: All Series One models.

Description: Reproduction wheel stud for Series 1. Threaded 9/16"BSF. Use with nut 217361.

Approximate dimensions: Overall length 52mm(2"), short threaded end 12mm(0.47"), long threaded end 27.5mm(1.08"), land 12.5mm(0.5")

find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > REGULAR Service and Repair Parts > Cooling System > Radiator hoses and heater hoses
Page:   <<   <  1  2
Replacement Heater Hoses S3 RHD Ref: HEATERHOSEKIT01
Application: Series 3 4 cylinder petrol (gasolene) and diesel, right hand drive.
Description: Set of 3 hoses and 6 hose clips. Hose part numbers 577292, 594629 & 594632.

Price: 7.50 (9.00 Including VAT at 20%)



Replacement Heater Hoses S3 RHD
Replacement Heater Hoses S3 LHD Ref: HEATERHOSEKIT02
Application: Series 3 4 cylinder petrol (gasolene) and diesel, left hand drive.
Description: Set of 4 hoses and 8 hose clips. Hose part numbers 2x 577292, 594629 & 594636.

Price: 8.95 (10.74 Including VAT at 20%)



Replacement Heater Hoses S3 LHD
Cap for Overflow Bottle Ref: 564719
Application: Series 3 4cyl & 6cyl engines, 101 Forward Control.

Description: Blacl plastic cap for plastic overflow bottle as fitted to Series 3 and 101FC.

Approximate dimensions: 73mm( 2.9") across flats, 22.5mm(0.9") high.

Price: 4.07 (4.88 Including VAT at 20%)




People who bought this item also bought:
1. Red Rotor Arm for 6 cylinder Distributor (Ref: RTC4542R)
2. Distirbutor Cap 6cyl 45D (Ref: RTC3813)
3. Adaptor for Removal of Oil Seal Collar (Ref: LRT-37-010)
Cap for Overflow Bottle
Radiator Cap 9lbs Ref: RTC3610
Application: Late Series2A, Series3 and early 4cylinder Defenders.

Description: Radiator cap with ears set to regulate cooling system pressure at maximum of 9 pounds per square inch.

Approximate dimensions: Overall diameter (excluding ears) 59.2mm( 2.3"), height 28mm(1.1")

Old part number; GRC118

Price: 1.95 (2.34 Including VAT at 20%)




People who bought this item also bought:
1. Banjo Bolt for Oil Feed Pipe (Ref: ETC4498)
2. Oil Pressure Switch (Ref: 90519864)
3. Fixing Kit for Manifolds - Imperial (Ref: 598473IMPFIT)
Radiator Cap 9lbs
Heater Hoses Discovery NAS Ref: HEATERHOSEKIT03
Application: Discovery 1 North American Specification to chassis number SA163099/SA501919.
Description: Set of four replacement hoses and eight hose clips. Equivalent to 2x PCH000100(AWR1362), 1x ETC6889 and 1x ETC6890.

Price: 9.50 (11.40 Including VAT at 20%)



Heater Hoses Discovery NAS
Heater Hose Set for Discovery 1 NAS Ref: HEATERHOSEKIT04
Application: Discovery 1 North American Specification from chassis numberTA163100/TA501920 onwards.
Description: Set of 3 replacement heater hoses and 6x replacement hose clips. Set contains 2x PCH000110 (AWR2651/AWR3833) and 1x PEH101530.

Price: 16.13 (19.36 Including VAT at 20%)



Heater Hose Set for Discovery 1 NAS
Replacement Top Hose Discovery 1 V8 Ref: PCH000050D
Application: Discovery 1 V8 from chassis number MA098380 (approx 1995), North American Spec Discovery 1 from RA098380 (approx 1994).
Description: Radiator top hose.
Old part number: ESR3297

Price: 6.00 (7.20 Including VAT at 20%)



Replacement Top Hose Discovery 1 V8
Replacement Bottom Hose for Discovery 1 V8 Ref: PCH000060D
Application: Discovery 1 V8 from chassis number MA081992 (approx 1995), North American Spec Discovery 1 all except models fitted with Advance Evaporative Loss System.
Description: Bottom radiator hose assembly.

Price: 12.75 (15.30 Including VAT at 20%)



Replacement Bottom Hose for Discovery 1 V8
Genuine Bottom Hose for Discovery 1 V8 Ref: PCH000070
Application: Discovery 1 V8 and North American Spec Discovery 1 fitted with Advance Evaporative Loss system.
Description: Bottom radiator hose assembly

Price: 27.14 (32.57 Including VAT at 20%)



Genuine Bottom Hose for Discovery 1 V8
Digital Dispensary > REGULAR Service and Repair Parts > Cooling System > Radiator hoses and heater hoses
Page:   <<   <  1  2

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Steering Arm - Series 1

Steering Arm - Series 1

17.82

Application: Series 1 models 1948 to 1956 approx.

Description: Drop arm for early type steering box. This arm is held in place with a pinch bolt.

Approximate dimensions: Overall length 17.4cm(6.9")

find out more

'D' Washer - Pedal Shaft

'D' Washer - Pedal Shaft

0.96

Application: Series 1 models.

Description: 'D' washer for support shaft for brake and clutch pedals.

Approximate dimensions: Outside diameter 38mm(1.5"), thickness 3mm(1/8").


find out more

Fixing Kit for Manifolds - Metric

Fixing Kit for Manifolds - Metric

12.83

Application: Series 3 from 1980 with 2.25 litre petrol engine.

Description: Metric threaded kit of fixings to hold manifolds to cylinder head. Kit includes 6 bolts, 2 set screws, 3 studs, 9 plain washers, 11 lock washers, 3 nuts, 2 clamps and 2 lockers

find out more

Fixing Kit for Manifolds - Imperial

Fixing Kit for Manifolds - Imperial

10.20

Application: Series 2 and Series 3 to approx 1980 with 2.25 litre petrol engine.

Description: Imperial (inch) threaded kit of fixings to hold manifolds to cylinder head. Kit includes 6 bolts, 2 set screws, 3 studs, 9 plain washers, 11 lock washers, 3 nuts, 2 clamps and 2 lockers

find out more

Shackle Plate Rear

Shackle Plate Rear

11.16

Application: Series1 1948 to 1953.

Description: Shackle plate for rear springs with plain 9/16" diameter holes.

Approximate dimensions: Length 113mm(4.45"), width 38mm(1.5"), thickness 9.2mm(0.36")
find out more

Shackle Plate Rear

Shackle Plate Rear

13.02

Application: Series 1 1948 to 1953.

Description: Shackle plate for rear springs with 1/2"BSF threaded holes.

Approximate dimensions: Length 113mm(4.45"), width 38mm(1.5"), thickness 9.2mm(0.36")

find out more

Clip for 3/16" Brake Pipe

Clip for 3/16

1.39

Application: Series1, Series2/2A and Series3 models.

Description: Reproduction stainless steel clip for brake pipes. Intended for 3/16" pipe, but will work with 1/4" diameter pipe also.

Approximate dimensions: Length 20mm(0.8"), width 10mm(3/8"), height 5mm(0.2"), hole diameter 4mm(0.16").

find out more

Rear End-plate for Cylinder Head

Rear End-plate for Cylinder Head

97.66

Application: Series 1 petrol models 1948 to 1958, Series 2 models with 2 litre petrol engine.

Description: Reproduction end plate in cast aluminium with mounting aperature for thermo switch.

Approximate dimensions: Length 91mm(3.6"), height 84mm(3.3"), depth 18.4mm(0.72")

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -