Digital Dispensary

Product Sections


Best Sellers

Air Hose Series 1

Air Hose Series 1

69.60

Application: Series 1 with the 2 litre petrol engine from 1955 to 1958. Also Series 2 with the 2 litre engine.

Description: Reproduction air hose between air filter and carburettor.

Approximate dimensions: Overall length 24.5cm(9.6"), internal diameter 50.8mm(2").

find out more

Brake Master Cylinder and Conversion Kit

Brake Master Cylinder and Conversion Kit

97.50

Application: Series 1 from 1954 to 1958 with 3/16" diameter brake pipes.

Description: Early Series 2 brake master cylinder and conversion kit to allow it to be fitted to Series 1.


Back in stock at long last.

find out more

Nut and Bolt Kit for Propshafts

Nut and Bolt Kit for Propshafts

2.40

Application: Series 1, Series 2, Series 2A, Series 3 Land Rovers. All Defenders, Classic Range Rover, Range Rover 2 (38A), Discovery 1 and Discovery 2.

Description: Set of four 3/8UNF x 1.125" long bolts plus four short nyloc nuts.
find out more

Spider Bypass Link Cable

Spider Bypass Link Cable

11.59

Application: Discovery 1 1995 to 1998 approx, where fitted with original immobilisation and alarm system.
Description: Small wiring harness to bypass the "spider" .
See http://forums.lr4x4.com/index.php?showtopic=86 for full instructions on how to fit.
find out more

Series1, 2 & 3 Wheel Bearing Kit with Japanese Bearings

Series1,  2 & 3 Wheel Bearing Kit with Japanese Bearings

39.94

Application: Series 1 front axle only, Series 2, Series 2A and Series 3 to 1980. Where inner bearing is larger than outer bearing. Covers both long and short wheel base vehicles, suitable for either front or rear wheel.

Description: Kit of parts to service one wheel hub. Kit comprises inner and outer Japanese manufactured wheel bearings (NTN or similar brand), Gaco inner seal, flange gasket, hub nut locker, felt outer seal, 'o' ring outer seal and split pin.

find out more

Land on Stub Axle for Hub Seal

Land on Stub Axle for Hub Seal

9.58

Application: Series 1 front axle, Series 2 and Series 3 upto 1980.
Description: Replaceable land or spacer on stub axle that the wheel hub seal runs on.
Approximate dimensions: outside diameter 2 5/8"(55.8mm), inside diameter 1 13/16" (46mm), depth 7/16"(11mm).
Original part number: 217351
find out more

Pack of 10 3/8" BSF Plain Nuts

Pack of 10 3/8

1.56

Pack of ten 3/8"BSF plain nuts, 19/32"(15mm) across flats, 0.35"(8.8mm) high.
Original part number 2827
find out more

Engine Mount Pair Series One 80"

Engine Mount Pair Series One 80

107.88

Application: 80" wheelbase Series 1 1948 to 1953.

Description: Pair of mounts for engine block with mounting bolts 2&15/16" long.

find out more

Olive for Vacuum Pipe

Olive for Vacuum Pipe

0.84

Application: Series 1 and Series2 with Solex 32PBI carburettor.

Description: Brass olive for use with 1/8" copper pipe.

Approximate dimensions: Length 4.7mm(0.19"), outside diameter 4.7mm(0.19"), internal dimater 1/8"(3.2mm).

find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > REGULAR Service and Repair Parts > Cooling System > Radiator hoses and heater hoses
Page:  1  2   >   >>
Top Hose Series 1 Ref: 268037
Application: Series 1 models with petrol engine.

Description: Reproduction top hose.

Approximate dimensions: Overall length round bend is 15.7cm(6.2"), inside diameter 28mm(1.1"), outside diameter 37mm(1.5")

Sorry we cannot obtain this hose currently. However the bottom hose, 268038 can be trimmed to fit.

Price: 9.30 (11.16 Including VAT at 20%)



People who bought this item also bought:
1. Axle Set of Brake Shoes - 10" (Ref: STC2796DKIT)
2. Pair of Brake Hoses S2A & S3 (Ref: RTC3386KIT)
3. Bottom Hose (Ref: 268038)
Top Hose Series 1
Bottom Hose Ref: 268038
Application: all Series 1 models.

Description: Reproduction bottom for Series 1. Can be cut to suit top hose 268037.

Approximate dimensions: inside diameter 28mm(1.1"), overall length 35cm(13.8").

Price: 12.00 (14.40 Including VAT at 20%)




People who bought this item also bought:
1. Fan Belt (Ref: STC3673)
2. Sealing Ring Water Pump to Cylinder Head (Ref: RTC1975)
3. 'O' Ring for Thermostat (Ref: 527235)
Bottom Hose
Bypass Hose Series 1 1948-1953 Ref: 212345
Application: Series 1 1948 to 1953 with 1.6 litre and early 2 litre engines.

Description: Reproduction bypass hose.

Approximate dimensions: Overall length 88mm(3.5"), outside diameter 45mm(1.8"), inside diameter 34mm(1.3")

Price: 4.91 (5.89 Including VAT at 20%)




People who bought this item also bought:
1. 'O' Ring for Thermostat (Ref: 527235)
2. Bypass Hose Series 1 (Ref: 242056)
3. Bottom Hose (Ref: 268038)
Bypass Hose Series 1 1948-1953
Bypass Hose Series 1 Ref: 242056
Application: Series 1 with 2 litre petrol engine.

Description: Reproduction thermostat bypass hose.

Approximate dimensions: Length 23cm(9"), internal diameter 35mm(1.4")

Price: 12.12 (14.54 Including VAT at 20%)




People who bought this item also bought:
1. Fan Belt (Ref: STC3673)
2. Sealing Ring Water Pump to Cylinder Head (Ref: RTC1975)
3. 'O' Ring for Thermostat (Ref: 527235)
Bypass Hose Series 1
Heater Control Valve Ref: 88G588L
Application: Series 2 & 2A.

Description: Reproduction brass control valve for heater on the above models.

Price: 16.48 (19.78 Including VAT at 20%)




People who bought this item also bought:
1. Hydraulic Brake Light Switch (Ref: STC1689)
2. Spark Plug Champion N12YC (Ref: RTC3570)
3. Nut and Bolt Kit for Propshafts (Ref: PROPFIX01)
Heater Control Valve
Replacement Heater Valve Series 3 Ref: 90577299
Application: Series 3 with 4 cylinder and 6 cylinder engines.

Description: Reproduction heater control valve.

Approximate dimensions: Height 84mm(3.3")

Price: 17.50 (21.00 Including VAT at 20%)



Replacement Heater Valve Series 3
Top Hose Series 3 4 cylinder Ref: 577346=
Application: Series 3 2.25 litre engines, both petrol and diesel. Also applicable to Series 2A four cylinder models which are fitted with the later radiator with narrow header tank.
Description: Top hose between radiator and engine..
Approximate dimensions: internal diameter 30.5mm (1. 3/16 inches), length around curve 27cm (10.5 inches).

Price: 3.50 (4.20 Including VAT at 20%)



Top Hose Series 3 4 cylinder
Bypass hose Series 2A and Series 3 Ref: 574871=
Application: Series 2A and Series 3 2.25 litre engines, both petrol and diesel.
Description: Replacement hose between water pump and thermostat housing.
Approximate dimensions: internal diameter 30.5mm (1.3/16 inches), length 95mm (3.75 inches).

Price: 0.90 (1.08 Including VAT at 20%)



Bypass hose Series 2A and Series 3
Bottom Hose Series 2A Ref: 530585
Application: Series2 and Series2A 2.25petrol models.

Description: Bottom hose for radiators with straight (perpendicular to bottom tank) connection. This is a tortured hose and is old limited stock.

Approximate dimensions: 33mm(1.3") outside diameter and 28mm(1.1")

Price: 9.36 (11.23 Including VAT at 20%)



Bottom Hose Series 2A
Bottom Hose Series 3 Ref: NRC3115=
Application: Series 3 2.25 litre engines, both petrol and diesel. Also applicable to Series 2A four cylinder models which are fitted with the later radiator with narrow header tank.
Description: Replacement bottom hose between radiator and engine..
Approximate dimensions: internal diameter 33.5mm (1. 5/16 inches), length around curve 33cm (13 inches).

Price: 3.50 (4.20 Including VAT at 20%)




People who bought this item also bought:
1. Oil Seal Differential Pinion (Ref: AEU2515)
2. Washer for Drain Plug (Ref: 515599)
Bottom Hose Series 3
Digital Dispensary > REGULAR Service and Repair Parts > Cooling System > Radiator hoses and heater hoses
Page:  1  2   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Shackle Plate Rear

Shackle Plate Rear

11.16

Application: Series1 1948 to 1953.

Description: Shackle plate for rear springs with plain 9/16" diameter holes.

Approximate dimensions: Length 113mm(4.45"), width 38mm(1.5"), thickness 9.2mm(0.36")
find out more

Shackle Plate Rear

Shackle Plate Rear

13.02

Application: Series 1 1948 to 1953.

Description: Shackle plate for rear springs with 1/2"BSF threaded holes.

Approximate dimensions: Length 113mm(4.45"), width 38mm(1.5"), thickness 9.2mm(0.36")

find out more

Clip for 3/16" Brake Pipe

Clip for 3/16

1.39

Application: Series1, Series2/2A and Series3 models.

Description: Reproduction stainless steel clip for brake pipes. Intended for 3/16" pipe, but will work with 1/4" diameter pipe also.

Approximate dimensions: Length 20mm(0.8"), width 10mm(3/8"), height 5mm(0.2"), hole diameter 4mm(0.16").

find out more

Rear End-plate for Cylinder Head

Rear End-plate for Cylinder Head

97.66

Application: Series 1 petrol models 1948 to 1958, Series 2 models with 2 litre petrol engine.

Description: Reproduction end plate in cast aluminium with mounting aperature for thermo switch.

Approximate dimensions: Length 91mm(3.6"), height 84mm(3.3"), depth 18.4mm(0.72")

find out more

Thermo Switch Series 1

Thermo Switch Series 1

80.92

Application: Series 1 petrol engines from 1948 to 1958.

Description: Reproduction switch for choke warning lamp. Supplied with mounting screws and lock washers.

Approximate dimensions: Length 64mm(2.52"), height 39.6mm(1.56"), depth including terminal 33mm(1.3")

find out more

Gaskets and Fitting Kit

Gaskets and Fitting Kit

9.26

Application: Series2A and Series3 models with 2.25litre petrol engine.

Description: Kit containing gaskets, studs and nuts for fitting of new exhaust manifold.

find out more

Exhaust Manifold

Exhaust Manifold

50.63

Application: Series2A and Series3 models with 2.25 petrol engine.

Description: Reproduction cast iron exhaust manifold

find out more

Coupling Repair Kit for MT82 Gearbox

Coupling Repair Kit for MT82 Gearbox

179.50

Application: Defender models 2007 to end of production;

Description: Kit to repace coupling shaft between MT82 gearbox and LT230 transfer box. Kit includes shaft, collar, bolt, 2 seals, spring ring, high temperature grease sachet and retaining clip.

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -