Digital Dispensary

Product Sections


Best Sellers

Grommet - Brake Pipe Support

Grommet - Brake Pipe Support

0.31

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Grommet to support brake pipe on rear axle casing. Used with clip 56666.
Approximate dimensions: overall length 21.5mm(0.85"), inside diameter 7mm(0.3"), outside diameter 14.5mm(0.6")
find out more

Clip for brake pipe grommet

Clip for brake pipe grommet

0.61

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Clip for brake pipe support grommet 6860L. Used on rear axle casing on all Series models from 1954 to 1984.
Approximate dimensions: 11mm(7/16") wide, 34mm(1.3") long, mounting hole 5mm(0.2") diameter, internal diameter of clip when closed 13mm.
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Gasket Set for Series Gearboxes

Gasket Set for Series Gearboxes

4.20

Application: Series 1, Series 2 & 3 with 4 or 6 cylinder engines.
Description: Set of replacement gaskets for main and transfer gearboxes. Does NOT include seals.
find out more

Water Pump Series1 Petrol

Water Pump Series1 Petrol

51.00

Application: Series 1 1.6ltr & 2.0ltr petrol (gasolene) engines.

Description: Reproduction cast iron water pump, supplied with gaskets.
find out more

Gaiter for High/Low Gear Lever

Gaiter for High/Low Gear Lever

2.46

Application: Series 1, Series 2/2A and Series 3.

Description: Reproduction rubber gaiter for the high/low gear lever.

Approximate dimensions: Overall length 143mm, height 90mm.

find out more

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

13.70

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Copper Ring Water Pump to Thermostat Housing

Copper Ring Water Pump to Thermostat Housing

7.44

Application: Series One with 1.6 or 2 litre petrol engine. Series Two with 2 litre petrol engine.
Description: Copper ring to support 'O' ring between water pump and thermostat housing.
Approximate dimensions: outside diameter 16mm(0.63"), inside diameter 11mm(0.43"), height 7.5mm(0.3")
find out more

Wheel Stud for Series 1

Wheel Stud for Series 1

5.82

Application: All Series One models.

Description: Reproduction wheel stud for Series 1. Threaded 9/16"BSF. Use with nut 217361.

Approximate dimensions: Overall length 52mm(2"), short threaded end 12mm(0.47"), long threaded end 27.5mm(1.08"), land 12.5mm(0.5")

find out more

These Superb Prices are ONLY available when you order ON-LINE

Page:   <<   <  1  2
Genuine Oil Filter Element RTC3183 Ref: RTC3183
Application: Series1 2 litre petrol, S2A & S3 2.6 litre 6 cylinder petrol.

Approximate dimensions: 70mm diameter x 173mm long.

Price: 4.82 (5.78 Including VAT at 20%)




People who bought this item also bought:
1. Spark Plug Champion N5C (Ref: RTC3571)
2. Mounting Pad for Fuel Pump (Ref: 212557)
3. Mounting Bush for Fuel Pump (Ref: 212558)
Genuine Oil Filter Element RTC3183
Genuine Oil Filter 4 cylinder Series engine Ref: RTC3184
Genuine Land Rover oil filter.

Application: Series 2A 2.25 petrol and diesel engines from approx 1965, Series 3 2.25 petrol and diesel engines.

Approximate dimensions: 92mm diameter x 114mm long.

Price: 8.20 (9.84 Including VAT at 20%)



Genuine Oil Filter 4 cylinder Series engine
Oil Filter Series 2 and Series 3 4cylinder Engines Ref: RTC3184=
Wix brand oil filter element ( Mahle or Fram may be supplied depending on availability).

Application: Series 2A 2.25 petrol and diesel engines from approx 1965, Series 3 2.25 petrol and diesel engines. Please note the sealing rubber is of circular cross section not the original square cross section. Consequently more care is required on fitting to obtain a good seal.

Approximate dimensions: 92mm diameter x 114mm long.

Price: 3.85 (4.62 Including VAT at 20%)



Oil Filter Series 2 and Series 3 4cylinder Engines
Oil Filter Element RTC3185 Ref: RTC3185
Application: Series 2 and early Series 2A 2.25 litre petrol and diesel engines. This is the 'long' type filter element.

Description: We can no longer source either genuine or OE filters for this application. However Bearmach offer a UK made one, so this is what we now offer.

Approximate dimensions: 93mm diameter x 175mm long.

Price: 6.00 (7.20 Including VAT at 20%)



Oil Filter Element RTC3185
Replacement Equivalent to RTC3186 Ref: RTC3186
Mahle oil filter element.

Application: Range Rover V8 1970 to 1975 approx, engine types 341, 355 & 359 up to suffix E inclusive.

Approximate dimensions: 95mm diameter x 105mm long.

Price: 9.76 (11.71 Including VAT at 20%)



Replacement Equivalent to RTC3186
Genuine Oil filter Element - STC2180 Ref: STC2180
Application: Range Rover 2nd Generation with BMW diesel engine upto December 1995.

Approx dimensions: 88mm diameter x 153mm long.

This element has steel end caps and comes with 2 'O' rings and 2 washers.

Price: 7.12 (8.54 Including VAT at 20%)



Genuine Oil filter Element - STC2180
Genuine Oil Filter Element - STC3350 Ref: STC3350
Application: Range Rover 2nd Generation with BMW diesel engine from December 1995.

Approx dimensions: 88mm diameter x 153mm long.

This element has plastic end caps and comes with 3 'O' rings and 1 washer.

Price: 6.07 (7.28 Including VAT at 20%)



Genuine Oil Filter Element - STC3350
Replacement Alternative to STC3350 Ref: STC3350=
Mahle oil filter element - OX126D (Knecht may be supplied as an alternative)

Application: Range Rover 2nd Generation with BMW diesel engine from December 1995.

Approx dimensions: 88mm diameter x 153mm long.

This element has card end caps and comes with 3 'O' rings and 2 washers.

Price: 5.07 (6.08 Including VAT at 20%)



Replacement Alternative to STC3350
Page:   <<   <  1  2

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Steering Arm - Series 1

Steering Arm - Series 1

17.82

Application: Series 1 models 1948 to 1956 approx.

Description: Drop arm for early type steering box. This arm is held in place with a pinch bolt.

Approximate dimensions: Overall length 17.4cm(6.9")

find out more

'D' Washer - Pedal Shaft

'D' Washer - Pedal Shaft

0.96

Application: Series 1 models.

Description: 'D' washer for support shaft for brake and clutch pedals.

Approximate dimensions: Outside diameter 38mm(1.5"), thickness 3mm(1/8").


find out more

Fixing Kit for Manifolds - Metric

Fixing Kit for Manifolds - Metric

12.83

Application: Series 3 from 1980 with 2.25 litre petrol engine.

Description: Metric threaded kit of fixings to hold manifolds to cylinder head. Kit includes 6 bolts, 2 set screws, 3 studs, 9 plain washers, 11 lock washers, 3 nuts, 2 clamps and 2 lockers

find out more

Fixing Kit for Manifolds - Imperial

Fixing Kit for Manifolds - Imperial

10.20

Application: Series 2 and Series 3 to approx 1980 with 2.25 litre petrol engine.

Description: Imperial (inch) threaded kit of fixings to hold manifolds to cylinder head. Kit includes 6 bolts, 2 set screws, 3 studs, 9 plain washers, 11 lock washers, 3 nuts, 2 clamps and 2 lockers

find out more

Shackle Plate Rear

Shackle Plate Rear

11.16

Application: Series1 1948 to 1953.

Description: Shackle plate for rear springs with plain 9/16" diameter holes.

Approximate dimensions: Length 113mm(4.45"), width 38mm(1.5"), thickness 9.2mm(0.36")
find out more

Shackle Plate Rear

Shackle Plate Rear

13.02

Application: Series 1 1948 to 1953.

Description: Shackle plate for rear springs with 1/2"BSF threaded holes.

Approximate dimensions: Length 113mm(4.45"), width 38mm(1.5"), thickness 9.2mm(0.36")

find out more

Clip for 3/16" Brake Pipe

Clip for 3/16

1.39

Application: Series1, Series2/2A and Series3 models.

Description: Reproduction stainless steel clip for brake pipes. Intended for 3/16" pipe, but will work with 1/4" diameter pipe also.

Approximate dimensions: Length 20mm(0.8"), width 10mm(3/8"), height 5mm(0.2"), hole diameter 4mm(0.16").

find out more

Rear End-plate for Cylinder Head

Rear End-plate for Cylinder Head

97.66

Application: Series 1 petrol models 1948 to 1958, Series 2 models with 2 litre petrol engine.

Description: Reproduction end plate in cast aluminium with mounting aperature for thermo switch.

Approximate dimensions: Length 91mm(3.6"), height 84mm(3.3"), depth 18.4mm(0.72")

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -