Digital Dispensary

Product Sections


Best Sellers

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

13.70

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Diaphragm Kit for Solex 32PBI-2

Diaphragm Kit for Solex 32PBI-2

18.80

Application: Series 1 1600cc & 2.0ltr petrol (gasolene).

Description: Diaphragm kit for accelerator pump

find out more

Contact Breakers Lucas 25D

Contact Breakers Lucas 25D

4.13

Application: Lucas 25D 4cylinder distributor as fitted to Series 2A and early Series 3 petrol engines, also used on late Series 1 engines with the DM2 distributor.

Description: Lucas boxed contact breaker set also known as 'points'.

Original part number 269987.

find out more

Flexible Fuel Pipe

Flexible Fuel Pipe

39.06

Application: Series I models with petrol engines.

Description: Reproduction flexible fuel pipe with one male end and one female end. Runs from fuel pipe towards carburettor. Now with ethanol proof lining!

Approximate dimensions: Overall length 39cm(15.3")

find out more

Axle Set of Brake Shoes - 10"

Axle Set of Brake Shoes - 10

33.94

Axle set of 4 10inch brake shoes by Mintex plus 4x pull-off springs, 6x imperial brake drum screws, 2x metric brake drum screws, 2 locking plates and 4 screws for anchor plates.

Application: Series1 80", 86" & 88" front and rear axles, Series 2/2A SWB front and rear, Series3 SWB front and rear to June 1980, Series3 SWB rear only from July 1980, Defender 90 rear to 1994.

Previous part numbers for shoes: RTC3411, GBS728, 505675, 505676
find out more

Replacement Condensor for Lucas 25D

Replacement Condensor for Lucas 25D

2.68

Application: Lucas 25D 4cylinder distributor as fitted to Series 2A and early Series 3 petrol engines.Also used on late Series 1 engines.

Description: No longer Lucas boxed condensor as the Lucas ones have a different connector on lead now that makes fixing ackward. So now sourcing from good after market source to original style of Lucas unit!

Approximate dimensions: overall diameter 17mm (0.67 inches), lead 57mm (2.24 inches).

Original part numbers 269988, 245007. DCB101, GSC101

find out more

Copper Ring Water Pump to Thermostat Housing

Copper Ring Water Pump to Thermostat Housing

7.44

Application: Series One with 1.6 or 2 litre petrol engine. Series Two with 2 litre petrol engine.
Description: Copper ring to support 'O' ring between water pump and thermostat housing.
Approximate dimensions: outside diameter 16mm(0.63"), inside diameter 11mm(0.43"), height 7.5mm(0.3")
find out more

Spark Plug Champion N5C

Spark Plug Champion N5C

2.14

Application: Series 2A and Series 3 4 cylinder engines with 7:1 compression ratio and all 6 cylinder Series engines. Also applicable to Series 1 engines.
Description: Champion N5C spark plug, original equipment.
Supersession of Series 1 part number 262796.
find out more

Felt Seal for Series 1 Pedals

Felt Seal for Series 1 Pedals

3.91

Application: Series 1 brake and clutch pedals.
Description: felt seal for brake and clutch pedals. Used with grommet 70620.
Approximate dimensions: 60mm (2.4") long, 44mm (1.7") wide, 15mm (0.6") deep.
find out more

These Superb Prices are ONLY available when you order ON-LINE

Page:  1  2   >   >>
Genuine Oil Filter Canister - LPW100180L Ref: LPW100180L
Application: Freelander 1.8 petrol engine.

Approximate dimensions: 77mm diameter x 93mm long.

Original part number: CDU1268

Price: 6.30 (7.56 Including VAT at 20%)



Genuine Oil Filter Canister - LPW100180L
Replacement Oil Filter Canister Ref: LPW100180L=
Application: Freelander 1 with 1.8 litre K series petrol engine.

Description: Coopers FIAAM boxed oil filter.

Approximate dimensions; 77mm(3") diameter, 93mm(3.7") long.

Price: 2.55 (3.06 Including VAT at 20%)



Replacement Oil Filter Canister
Genuine Oil Filter Canister - ERR3340 Ref: ERR3340
Application:
Defender 2.5 petrol, 2.5 diesel naturally aspirated, 2.5 diesel turbo, 200TDi, 300TDI and V8.
Discovery I 200TDi, 300TDi and V8.
Range Rover Classic V8 post approx 1975, 200TDi and 300TDi.
Range Rover 2nd Generation (38A) 4.0 V8 and 4.6 V8.

Approx diamensions: 95mm dia x 106mm long

Price: 5.91 (7.09 Including VAT at 20%)



Genuine Oil Filter Canister - ERR3340
Replacement alternative to ERR3340 Ref: ERR3340D
Coopers oil filter element Z1159 ( Crosland or Fram may be supplied depending on availability)
Application:
Defender 2.5 petrol, 2.5 diesel naturally aspirated, 2.5 diesel turbo, 200TDi, 300TDI and V8.
Discovery I 200TDi, 300TDi and V8.
Range Rover Classic V8 post approx 1975, 200TDi and 300TDi.
Range Rover 2nd Generation (38A) 4.0 V8 and 4.6 V8.

Approx diamensions: 95mm dia x 106mm long

Price: 2.94 (3.53 Including VAT at 20%)




People who bought this item also bought:
1. Diaphragm kit for Zenith 36IV (Ref: ZZB17333)
2. Service Kit for Lucas 25D Distributor (Ref: DISTSERVKIT01)
3. Vacuum Unit (Ref: 608111)
Replacement alternative to ERR3340
Genuine Oil Filter Canister - ERR5542 Ref: ERR5542
Genuine oil filter canister.

Application:
Freelander 2.0 diesel (not TD4) engines in the series 18N and 17N.

Approximate dimensions: 96mm diameter x 76mm long

Price: 6.51 (7.81 Including VAT at 20%)



Genuine Oil Filter Canister - ERR5542
Replacement Alternative to ERR5542 Ref: ERR5542=
Coopers oil filter canister - Z1302. ( Crosland, Mann or Fram may be supplied depending on availability)

Application:
Freelander 2.0 diesel (not TD4) engines in the series 18N and 17N.

Approximate dimensions: 96mm diameter x 76mm long

Price: 3.50 (4.20 Including VAT at 20%)



Replacement Alternative to ERR5542
Genuine Oil Pre-cleaning Rotor - ERR6299 Ref: ERR6299
Genuine oil pre-cleaning rotor for TD5 engines.

Approx dimensions: 82mm diameter x 66mm long.

Price: 18.23 (21.88 Including VAT at 20%)



Genuine Oil Pre-cleaning Rotor - ERR6299
Genuine Oil Filter Element - LPX100590 Ref: LPX100590
Application: Defender TD5 and Discovery2 TD5.

Approx dimensions: 78mm diameter x 105mm long.

Price: 8.31 (9.97 Including VAT at 20%)





Related products:
1. Wrench Oil Filter TD5 (Ref: ZZDA1117)
Genuine Oil Filter Element - LPX100590
Replacement Alternative to LPX100590 Ref: LPX100590M
Coopers oil filter element Z1353 ( Mahle or Fram may be supplied depending on availability).

Application: Defender TD5 and Discovery2 TD5.

Approx dimensions: 78mm diameter x 105mm long.

Price: 4.50 (5.40 Including VAT at 20%)



Replacement Alternative to LPX100590
Genuine Oil Filter Element - LRF100150L Ref: LRF100150L
Application: Freelander TD4 diesel engine.

Approximate dimensions: 63mm diameter x 115mm long.

Comes with 1x 'O' ring and 1x copper washer.

Price: 9.81 (11.77 Including VAT at 20%)



Genuine Oil Filter Element - LRF100150L
Page:  1  2   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Alignment Pins

Alignment Pins

53.27

Application: Freelander 2 and Evoque.

Description: Pair of pins for aligning front subrame to bodyshell.

Approximate dimensions: Overall length 168mm(6.6"), pin diameter 20mm(0.8")

find out more

Rear Lens Right Hand

Rear Lens Right Hand

47.04

Application: Range Rover Classic.

Description: Reproduction rear lamp lens with fog guard.

Approximate dimensions: Height 22.8cm(9"), width 14.3cm(5.6"), thickness 1.8cm(0.7")

find out more

Clamp for Disributor

Clamp for Disributor

18.60

Application: Series 1, Series 2 and Series 3 petrol models.

Description: Clamp for retaining distributor.

Approximate dimensions: Internal diameter 36mm(1.4"), thickness 3mm(0.12")

find out more

6 Way Junction Box

6 Way Junction Box

22.80

Application: All Series 1 models.

Description: Reproduction 6 way junction box.

Approximate dimensions: Overal diameter 54mm(2.1"), height 37.5mm(1.5")

find out more

Fuse Box Series 1

Fuse Box Series 1

34.54

Application: All Series 1 models.

Description: Reproduction 1 way fuse box, needs glass fuse.

Approximate dimensions: Length 54mm(2.1"), width 33mm(1.3"), height 45mm(1.9")

find out more

TDC Alignment Plate

TDC Alignment Plate

120.43

Application: 2.0 I4 MID DOHC AJ200 engine as used in Evoque and Freelander 2.

Description: Alignment plate for setting Top Dead Centre for this engine.

Approximate dimensions: 25cm(9.8"), x 20cm(7.9") x 0.8cm(0.31")

find out more

Thrust Bearing Assembly

Thrust Bearing Assembly

27.90

Application: Fairey overdrive for LT76 gearbox.

Description: Thrust bearing assembly for input shaft. Chamfered plate to clear radius on shaft step.

Approximate dimensions: Overall diameter 1-7/8"(47.6mm), inside diameter 30.8mm(1.21"), thickness of assembly 6mm(0.24")

find out more

Aligner for Balance Shaft

Aligner for Balance Shaft

78.14

Application: 2.0 I4 MID DOHC AJ200 engine as used in Evoque and Freelander 2.

Description: ool for aligning the balance shaft of this engine.

Approximate dimensions: Overall length 84mm(3.3"), flange diameter 70mm(2.75"), body diameter 44mm(1.73").

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -