Digital Dispensary

Product Sections


Best Sellers

Grommet - Brake Pipe Support

Grommet - Brake Pipe Support

0.31

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Grommet to support brake pipe on rear axle casing. Used with clip 56666.
Approximate dimensions: overall length 21.5mm(0.85"), inside diameter 7mm(0.3"), outside diameter 14.5mm(0.6")
find out more

Clip for brake pipe grommet

Clip for brake pipe grommet

0.61

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Clip for brake pipe support grommet 6860L. Used on rear axle casing on all Series models from 1954 to 1984.
Approximate dimensions: 11mm(7/16") wide, 34mm(1.3") long, mounting hole 5mm(0.2") diameter, internal diameter of clip when closed 13mm.
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Gasket Set for Series Gearboxes

Gasket Set for Series Gearboxes

4.20

Application: Series 1, Series 2 & 3 with 4 or 6 cylinder engines.
Description: Set of replacement gaskets for main and transfer gearboxes. Does NOT include seals.
find out more

Water Pump Series1 Petrol

Water Pump Series1 Petrol

51.00

Application: Series 1 1.6ltr & 2.0ltr petrol (gasolene) engines.

Description: Reproduction cast iron water pump, supplied with gaskets.
find out more

Gaiter for High/Low Gear Lever

Gaiter for High/Low Gear Lever

2.46

Application: Series 1, Series 2/2A and Series 3.

Description: Reproduction rubber gaiter for the high/low gear lever.

Approximate dimensions: Overall length 143mm, height 90mm.

find out more

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

13.70

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Copper Ring Water Pump to Thermostat Housing

Copper Ring Water Pump to Thermostat Housing

7.44

Application: Series One with 1.6 or 2 litre petrol engine. Series Two with 2 litre petrol engine.
Description: Copper ring to support 'O' ring between water pump and thermostat housing.
Approximate dimensions: outside diameter 16mm(0.63"), inside diameter 11mm(0.43"), height 7.5mm(0.3")
find out more

Wheel Stud for Series 1

Wheel Stud for Series 1

5.82

Application: All Series One models.

Description: Reproduction wheel stud for Series 1. Threaded 9/16"BSF. Use with nut 217361.

Approximate dimensions: Overall length 52mm(2"), short threaded end 12mm(0.47"), long threaded end 27.5mm(1.08"), land 12.5mm(0.5")

find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > REGULAR Service and Repair Parts > Engine Parts > 4 Cylinder Petrol Engine Parts
Page:   <<   <  1  2  3   >   >>
Bearing Set for Connecting Rods Ref: RTC1730
Application: 2.25 litre 4 cylinder petrol and diesel engines in Series 2A, Series 3 and early 110/90 with the 2.25 petrol engine.

Description: Original Equipment bearing set by Glyco(possibly Vandervell or Glacier depending on availability) for the connecting rods to the crankshaft. For crank pin journals of 2.312"(58.72mm)diameter.

Old part number: 524151

Price: 15.00 (18.00 Including VAT at 20%)




People who bought this item also bought:
1. Thrust Washer Pair - Standard Size (Ref: RTC2825)
2. Main Bearing Set - Crankshaft (Ref: RTC2626)
Bearing Set for Connecting Rods
Big End Set - .010" undersize Ref: RTC173010
Application: 2.25 litre 4 cylinder petrol and diesel engines in Series 2A, Series 3 and early 110/90.

Description: 0.010"(0.25mm) undersize Original Equipment bearing set by Glyco(possibly Vandervell or Glacier depending on availability) for the connecting rods to the crankshaft. For crank pin journals of 2.302"(58.47mm)diameter.

Old part number: 524152

Price: 15.00 (18.00 Including VAT at 20%)




People who bought this item also bought:
1. Main Bearing Set - Crankshaft (Ref: RTC2626)
2. Spigot Bush (Ref: LFB500050)
3. Timing Chain - AE boxed (Ref: ETC4499)
Big End Set - .010
Big End Set - .020" undersize Ref: RTC173020
Application: 2.25 litre 4 cylinder petrol and diesel engines in Series 2A, Series 3 and early 110/90.

Description: 0.020"(0.50mm) undersize Original Equipment bearing set by Glyco(possibly Vandervell or Glacier depending on availability) for the connecting rods to the crankshaft. For crank pin journals of 2.292"(58.22mm)diameter.

Old part number: 524153

Price: 15.00 (18.00 Including VAT at 20%)



Big End Set - .020
Big End Set - .030" undersize Ref: RTC173030
Application: 2.25 litre 4 cylinder petrol and diesel engines in Series 2A, Series 3 and early 110/90.

Description: 0.030"(0.75mm) undersize Original Equipment bearing set by Glyco(possibly Vandervell or Glacier depending on availability) for the connecting rods to the crankshaft. For crank pin journals of 2.282"(57.97mm)diameter.

Old part number: 524154

Price: 15.00 (18.00 Including VAT at 20%)



Big End Set - .030
Big End Set - .040" undersize Ref: RTC173040
Application: 2.25 litre 4 cylinder petrol and diesel engines in Series 2A, Series 3 and early 110/90.

Description: 0.040"(1.00mm) undersize Original Equipment bearing set by Glyco(possibly Vandervell or Glacier depending on availability) for the connecting rods to the crankshaft. For crank pin journals of 2.272"(57.72mm)diameter.

Old part number: 524155

Price: 15.00 (18.00 Including VAT at 20%)



Big End Set - .040
Thrust Washer Pair - Standard Size Ref: RTC2825
Application: Series 2A & Series 3 4 cylinder engines, Defender 2.25P, 2.5P, 2.5NAD and 2.5TD, 200TDI and 300TDI.

Description: Replacement pair of thrust washers for crankshaft - standard size. Usually fitted when crankshaft main journal bearings are replaced.

Approximate dimensions: Outside diameter of pair 86mm( 3.39"), inside diameter of pair 71mm(2.8"), thickness 2.36mm(0.093")

Previous part number: 538130

Price: 2.00 (2.40 Including VAT at 20%)




People who bought this item also bought:
1. Main Bearing Set - Crankshaft (Ref: RTC2626)
2. Bearing Set for Connecting Rods (Ref: RTC1730)
Thrust Washer Pair - Standard Size
Thrust Washer Pair - 0.0025" Oversize Ref: 538131
Application: Series 2A & Series 3 4 cylinder engines, Defender 2.25P, 2.5P, 2.5NAD and 2.5TD, 200TDI and 300TDI.

Description: Replacement pair of thrust washers for crankshaft0.0025" oversize. Usually fitted when crankshaft main journal bearings are replaced.

Approximate dimensions: Outside diameter of pair 86mm( 3.39"), inside diameter of pair 71mm(2.8"), thickness 2.43mm(0.0955")

Price: 2.00 (2.40 Including VAT at 20%)




People who bought this item also bought:
1. Main Bearing Set - Crankshaft (Ref: RTC2626)
2. Big End Set - .010" undersize (Ref: RTC173010)
3. Spigot Bush (Ref: LFB500050)
Thrust Washer Pair - 0.0025
Exhaust Manifold Ref: 598473D
Application: Series2A and Series3 models with 2.25 petrol engine.

Description: Reproduction cast iron exhaust manifold

Price: 42.19 (50.63 Including VAT at 20%)



Exhaust Manifold
Gaskets and Fitting Kit Ref: 598473FIT
Application: Series2A and Series3 models with 2.25litre petrol engine.

Description: Kit containing gaskets, studs and nuts for fitting of new exhaust manifold.

Price: 7.72 (9.26 Including VAT at 20%)



Gaskets and Fitting Kit
Fixing Kit for Manifolds - Imperial Ref: 598473IMPFIT
Application: Series 2 and Series 3 to approx 1980 with 2.25 litre petrol engine.

Description: Imperial (inch) threaded kit of fixings to hold manifolds to cylinder head. Kit includes 6 bolts, 2 set screws, 3 studs, 9 plain washers, 11 lock washers, 3 nuts, 2 clamps and 2 lockers

Price: 8.50 (10.20 Including VAT at 20%)




People who bought this item also bought:
1. Banjo Bolt for Oil Feed Pipe (Ref: ETC4498)
2. Thermostat 74 degrees (Ref: 532453)
3. Radiator Cap 9lbs (Ref: RTC3610)
Fixing Kit for Manifolds - Imperial
Digital Dispensary > REGULAR Service and Repair Parts > Engine Parts > 4 Cylinder Petrol Engine Parts
Page:   <<   <  1  2  3   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Steering Arm - Series 1

Steering Arm - Series 1

17.82

Application: Series 1 models 1948 to 1956 approx.

Description: Drop arm for early type steering box. This arm is held in place with a pinch bolt.

Approximate dimensions: Overall length 17.4cm(6.9")

find out more

'D' Washer - Pedal Shaft

'D' Washer - Pedal Shaft

0.96

Application: Series 1 models.

Description: 'D' washer for support shaft for brake and clutch pedals.

Approximate dimensions: Outside diameter 38mm(1.5"), thickness 3mm(1/8").


find out more

Fixing Kit for Manifolds - Metric

Fixing Kit for Manifolds - Metric

12.83

Application: Series 3 from 1980 with 2.25 litre petrol engine.

Description: Metric threaded kit of fixings to hold manifolds to cylinder head. Kit includes 6 bolts, 2 set screws, 3 studs, 9 plain washers, 11 lock washers, 3 nuts, 2 clamps and 2 lockers

find out more

Fixing Kit for Manifolds - Imperial

Fixing Kit for Manifolds - Imperial

10.20

Application: Series 2 and Series 3 to approx 1980 with 2.25 litre petrol engine.

Description: Imperial (inch) threaded kit of fixings to hold manifolds to cylinder head. Kit includes 6 bolts, 2 set screws, 3 studs, 9 plain washers, 11 lock washers, 3 nuts, 2 clamps and 2 lockers

find out more

Shackle Plate Rear

Shackle Plate Rear

11.16

Application: Series1 1948 to 1953.

Description: Shackle plate for rear springs with plain 9/16" diameter holes.

Approximate dimensions: Length 113mm(4.45"), width 38mm(1.5"), thickness 9.2mm(0.36")
find out more

Shackle Plate Rear

Shackle Plate Rear

13.02

Application: Series 1 1948 to 1953.

Description: Shackle plate for rear springs with 1/2"BSF threaded holes.

Approximate dimensions: Length 113mm(4.45"), width 38mm(1.5"), thickness 9.2mm(0.36")

find out more

Clip for 3/16" Brake Pipe

Clip for 3/16

1.39

Application: Series1, Series2/2A and Series3 models.

Description: Reproduction stainless steel clip for brake pipes. Intended for 3/16" pipe, but will work with 1/4" diameter pipe also.

Approximate dimensions: Length 20mm(0.8"), width 10mm(3/8"), height 5mm(0.2"), hole diameter 4mm(0.16").

find out more

Rear End-plate for Cylinder Head

Rear End-plate for Cylinder Head

97.66

Application: Series 1 petrol models 1948 to 1958, Series 2 models with 2 litre petrol engine.

Description: Reproduction end plate in cast aluminium with mounting aperature for thermo switch.

Approximate dimensions: Length 91mm(3.6"), height 84mm(3.3"), depth 18.4mm(0.72")

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -