Digital Dispensary

Product Sections


Best Sellers

Air Hose Series 1

Air Hose Series 1

69.60

Application: Series 1 with the 2 litre petrol engine from 1955 to 1958. Also Series 2 with the 2 litre engine.

Description: Reproduction air hose between air filter and carburettor.

Approximate dimensions: Overall length 24.5cm(9.6"), internal diameter 50.8mm(2").

find out more

Brake Master Cylinder and Conversion Kit

Brake Master Cylinder and Conversion Kit

97.50

Application: Series 1 from 1954 to 1958 with 3/16" diameter brake pipes.

Description: Early Series 2 brake master cylinder and conversion kit to allow it to be fitted to Series 1.


Back in stock at long last.

find out more

Nut and Bolt Kit for Propshafts

Nut and Bolt Kit for Propshafts

2.40

Application: Series 1, Series 2, Series 2A, Series 3 Land Rovers. All Defenders, Classic Range Rover, Range Rover 2 (38A), Discovery 1 and Discovery 2.

Description: Set of four 3/8UNF x 1.125" long bolts plus four short nyloc nuts.
find out more

Spider Bypass Link Cable

Spider Bypass Link Cable

11.59

Application: Discovery 1 1995 to 1998 approx, where fitted with original immobilisation and alarm system.
Description: Small wiring harness to bypass the "spider" .
See http://forums.lr4x4.com/index.php?showtopic=86 for full instructions on how to fit.
find out more

Series1, 2 & 3 Wheel Bearing Kit with Japanese Bearings

Series1,  2 & 3 Wheel Bearing Kit with Japanese Bearings

39.94

Application: Series 1 front axle only, Series 2, Series 2A and Series 3 to 1980. Where inner bearing is larger than outer bearing. Covers both long and short wheel base vehicles, suitable for either front or rear wheel.

Description: Kit of parts to service one wheel hub. Kit comprises inner and outer Japanese manufactured wheel bearings (NTN or similar brand), Gaco inner seal, flange gasket, hub nut locker, felt outer seal, 'o' ring outer seal and split pin.

find out more

Land on Stub Axle for Hub Seal

Land on Stub Axle for Hub Seal

9.58

Application: Series 1 front axle, Series 2 and Series 3 upto 1980.
Description: Replaceable land or spacer on stub axle that the wheel hub seal runs on.
Approximate dimensions: outside diameter 2 5/8"(55.8mm), inside diameter 1 13/16" (46mm), depth 7/16"(11mm).
Original part number: 217351
find out more

Pack of 10 3/8" BSF Plain Nuts

Pack of 10 3/8

1.56

Pack of ten 3/8"BSF plain nuts, 19/32"(15mm) across flats, 0.35"(8.8mm) high.
Original part number 2827
find out more

Engine Mount Pair Series One 80"

Engine Mount Pair Series One 80

107.88

Application: 80" wheelbase Series 1 1948 to 1953.

Description: Pair of mounts for engine block with mounting bolts 2&15/16" long.

find out more

Olive for Vacuum Pipe

Olive for Vacuum Pipe

0.84

Application: Series 1 and Series2 with Solex 32PBI carburettor.

Description: Brass olive for use with 1/8" copper pipe.

Approximate dimensions: Length 4.7mm(0.19"), outside diameter 4.7mm(0.19"), internal dimater 1/8"(3.2mm).

find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > REGULAR Service and Repair Parts > Engine Parts > 4 Cylinder Petrol Engine Parts
Page:  1  2   >   >>
Decoke Gasket Set Ref: STC1567=
Application: 2.25 and 2.5 litre petrol engines for Series 2A, Series 3 and Defender.
Description: Set of gaskets for cylinder head, also called decoke gasket set. Manufactured by Payen (part of Federal Mogul) features composite head gasket (which does not require re-torqueing) and 46 other gaskets and seals. This set is "asbestos free".

Out of stock until January 2018.

Price: 31.71 (38.05 Including VAT at 20%)


Decoke Gasket Set
Manifold Gasket 4cyl Petrol Ref: 274171=
Application: 2.25 and 2.5 litre petrol engines for Series 2A, Series 3 and Defender.
Description: Non genuine gasket between manifolds and cylinder head.

Price: 0.85 (1.02 Including VAT at 20%)




People who bought this item also bought:
1. Nyloc Nuts 7/16" UNF - pack of 10 (Ref: NY607041Lx10)
2. Electric Fuel Pump - Series 1 (Ref: AUA25)
3. Brake Drum for 10" Brakes (Ref: 591661D)
Manifold Gasket 4cyl Petrol
Rocker Box Gasket 4cyl Petrol Ref: ERR4933
Application: 2.25 and 2.5 litre petrol engines for Series 2A, Series 3 and Defender.
Description: Gasket for rocker box (valve cover). This is a non-genuine gasket, it is self adhesive on one face to ease assembly and improve sealing.

Price: 1.27 (1.52 Including VAT at 20%)



Rocker Box Gasket 4cyl Petrol
Rocker Box Fitting Kit Ref: 247121KIKT
Application: 2.25 petrol engine in Series2, Series2A and Series3.

Description: Smatren up the top of your rocker box with this set of 3 domed nuts, 3 aluminium sealing washer, 3 domed washers and 3 rubber seals.


Price: 15.90 (19.08 Including VAT at 20%)



Rocker Box Fitting Kit
Cylinder Head Gasket 4cyl Petrol Engine Ref: ERC6380=
Application: 2.25 and 2.5 litre petrol engines for Series 2A, Series 3 and Defender.

Description: Composite cylinder head gasket by 'Elring'. Composite head gaskets do not require re-torquing as the copper type do.

Price: 14.90 (17.88 Including VAT at 20%)



Cylinder Head Gasket 4cyl Petrol Engine
Timing Chain - AE boxed Ref: ETC4499
Application: Series 1 1.6ltr & 2ltr petrol engines, Series 2&3 2.25ltr petrol & diesel engines.
Description: Duplex timing chain with 78 links and pitch of 3/8". From Federal Mogul as an AE product.
Original part number: 09156

Price: 10.45 (12.54 Including VAT at 20%)




People who bought this item also bought:
1. Gasket Inlet Pipe to Water Pump (Ref: 213724)
2. Gasket Set for Solex 32PBI-2 Carburettor (Ref: 274895)
3. Acorn for HT Leads (Ref: 214278)
Timing Chain - AE boxed
Oil Seal between Crankshaft and Front Cover Ref: ERR6490
Application: S1 1600 & 2000 petrol, 2ltr diesel, Series 2 & 3 4 and 6 cylinder engines, 200Tdi and 300TDi.
Description: Oil seal by Corteco for engine front cover.
Approximate dimensions: outside diameter 63.5mm (2.5"), thickness 10mm (3/8").
Original part number 213744.

Price: 3.65 (4.38 Including VAT at 20%)




People who bought this item also bought:
1. Fixings Kit for Water Pump (Ref: 269974FIX)
2. Copper Ring Water Pump to Thermostat Housing (Ref: 9197)
3. Split Brass Washer (Ref: 214279)
Oil Seal between Crankshaft and Front Cover
Oil Pressure Switch Ref: 90519864
Application: Series 1 2.0ltr petrol & 2.0ltr diesel, S2&3 2.25ltr petrol & diesel.

Description: Oil pressure switch for oil pressure warning light.

Original part number 505152

Price: 3.83 (4.60 Including VAT at 20%)




People who bought this item also bought:
1. Copper Ring Water Pump to Thermostat Housing (Ref: 9197)
2. Split Brass Washer (Ref: 214279)
3. Drive Flange for Differential (Ref: 236632D)
Oil Pressure Switch
Spigot Bush Ref: LFB500050
Application: All 4 and 6 cylinder engines fitted to Series 1, 2 & 3. Also 200 & 300TDi fitted to Defender, Discovery 1 and Range Rover Classic. Also TD5 models. In addition Series 1, 2 and 3 transfer box.

Description: Bronze bush fitted to rear of crankshaft to take nose of first motion shaft of gearbox. Also used as bush between front output shaft and rear output shaft in Series transfer boxes (not 109V8).
Original part number 8566 and 8566L.

Approximate dimensions: Outside diameter 1 1/16"(27mm), inside diameter 7/8"(22mm), length 0.84"(21.4mm)

Price: 1.21 (1.45 Including VAT at 20%)




People who bought this item also bought:
1. Bearing Layshaft Rear (Ref: RTC1412D)
2. Bearing First Motion Shaft (Ref: 6397)
3. Oil Seal Set for Gearbox (Ref: 600603KIT)
Spigot Bush
Gasket Cover Plate to Timing Window Ref: 50216
Application: S1, S2 & S3 4 cylinder engines.
Description: Cork gasket for cover plate on flywheel housing.

Price: 0.88 (1.06 Including VAT at 20%)



Gasket Cover Plate to Timing Window
Digital Dispensary > REGULAR Service and Repair Parts > Engine Parts > 4 Cylinder Petrol Engine Parts
Page:  1  2   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Shackle Plate Rear

Shackle Plate Rear

11.16

Application: Series1 1948 to 1953.

Description: Shackle plate for rear springs with plain 9/16" diameter holes.

Approximate dimensions: Length 113mm(4.45"), width 38mm(1.5"), thickness 9.2mm(0.36")
find out more

Shackle Plate Rear

Shackle Plate Rear

13.02

Application: Series 1 1948 to 1953.

Description: Shackle plate for rear springs with 1/2"BSF threaded holes.

Approximate dimensions: Length 113mm(4.45"), width 38mm(1.5"), thickness 9.2mm(0.36")

find out more

Clip for 3/16" Brake Pipe

Clip for 3/16

1.39

Application: Series1, Series2/2A and Series3 models.

Description: Reproduction stainless steel clip for brake pipes. Intended for 3/16" pipe, but will work with 1/4" diameter pipe also.

Approximate dimensions: Length 20mm(0.8"), width 10mm(3/8"), height 5mm(0.2"), hole diameter 4mm(0.16").

find out more

Rear End-plate for Cylinder Head

Rear End-plate for Cylinder Head

97.66

Application: Series 1 petrol models 1948 to 1958, Series 2 models with 2 litre petrol engine.

Description: Reproduction end plate in cast aluminium with mounting aperature for thermo switch.

Approximate dimensions: Length 91mm(3.6"), height 84mm(3.3"), depth 18.4mm(0.72")

find out more

Thermo Switch Series 1

Thermo Switch Series 1

80.92

Application: Series 1 petrol engines from 1948 to 1958.

Description: Reproduction switch for choke warning lamp. Supplied with mounting screws and lock washers.

Approximate dimensions: Length 64mm(2.52"), height 39.6mm(1.56"), depth including terminal 33mm(1.3")

find out more

Gaskets and Fitting Kit

Gaskets and Fitting Kit

9.26

Application: Series2A and Series3 models with 2.25litre petrol engine.

Description: Kit containing gaskets, studs and nuts for fitting of new exhaust manifold.

find out more

Exhaust Manifold

Exhaust Manifold

50.63

Application: Series2A and Series3 models with 2.25 petrol engine.

Description: Reproduction cast iron exhaust manifold

find out more

Coupling Repair Kit for MT82 Gearbox

Coupling Repair Kit for MT82 Gearbox

179.50

Application: Defender models 2007 to end of production;

Description: Kit to repace coupling shaft between MT82 gearbox and LT230 transfer box. Kit includes shaft, collar, bolt, 2 seals, spring ring, high temperature grease sachet and retaining clip.

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -