Digital Dispensary

Product Sections


Best Sellers

Gasket Exhaust Manifold to Down Pipe

Gasket Exhaust Manifold to Down Pipe

0.96

Application: Series 1, 2 & 3 four cylinder engines.
Description: Square flange gasket for exhaust. Used on various exhaust manifolds and on some pipe to pipe exhaust joints.
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Gaiter for Main Gear Lever

Gaiter for Main Gear Lever

2.16

Application: Series 1, Series 2, Series 2A and Series 3 4 & 6 cylinder models.

Description: Reproduction rubber gaiter for main gear lever.

Approximare dimensions: 11.5cm(4.5") square, 3.6cm(1.4") high.

find out more

Brass Nut 5/16"BSF

Brass Nut 5/16

1.86

Application: Series1 exhaust manifold.

Description: Brass nut 5/16"BSF for holding downpipe to exhaust manifold.

Approximate dimensions: 3/8"(9.5mm) high, 17/32"(13.5mm) across flats.

find out more

Rear Shock Absorber

Rear Shock Absorber

18.74

Application: Series 1 1954 onwards, Series 2 and 3 short wheel base models.
Description: Replacement rear shock absorber by Armstrong.
Approximate dimensions: Overall length closed 36.2cm(14.3"), overall length open 55.5cm(21.9").
Original part number 501445
find out more

Inner Wheel Hub Seal

Inner Wheel Hub Seal

4.28

Application: Series 1 front axles, Series 2 & Series 3 to 1980.
Description: Inner hub oil seal made by Corteco/Gaco.
Approximate dimensions: outside diameter 85mm (3.35"), thickness 7.8mm (0.3").
Original part number 239422.

find out more

Condenser S1 1.6 litre

Condenser S1 1.6 litre

15.30

Application: Series 1 1600cc engine 1948 to 1953.
Description: Condenser for distributor, equivalent to Lucas 407044
Approximate dimensions: ovelall length 44mm(1.7"), overall diameter 17mm(0.7")
find out more

Gasket for Differential to Axle Casing

Gasket for Differential to Axle Casing

0.60

Application: Rover type differentials on Series 1, 2 & 3. Range Rover Classic, Defender and Discovery 1.
Description: replacement gasket for differential assembly to axle casing.
Approximate dimensions: overall diameter 24.4cm (9.6")
find out more

Remover/Replacer Hub

Remover/Replacer Hub

359.50

Application: Discovery 3/4, Range Rover Sport and Range Rover 3 (L322).
Description: Kit of 11 tools for removing and replacing front and rear wheel hubs.

Old part number: LRT-60-030
find out more

These Superb Prices are ONLY available when you order ON-LINE

Page:   <<   <  1  2  3   >   >>
Wiper Blade Ref: 261504
Application: Series One - all years.
Description: Reproduction wiper blade by Tex Classic. Length 23cm (9"), peg fixing (peg not included).

Price: 8.52 (10.22 Including VAT at 20%)




People who bought this item also bought:
1. Set of Rivets for Bonnet Strip (Ref: 68087x12)
2. Bonnet Rest Strip (Ref: 300824A)
3. Rubber Peg for Wiper Blade (Ref: ZZB00100)


Related products:
1. Rubber Peg for Wiper Blade (Ref: ZZB00100)
Wiper Blade
Rubber Peg for Wiper Blade Ref: ZZB00100
Application: Series 1 1948 to 1958.

Decription: Rubber peg for retaining wiper blade to wiper arm.

Approximate dimensions: overall length 20.5mm(0.8")

Price: 0.79 (0.95 Including VAT at 20%)




People who bought this item also bought:
1. Wiper Blade (Ref: 261504)
2. Bonnet Rest Strip (Ref: 300824A)
3. Set of Rivets for Bonnet Strip (Ref: 68087x12)
Rubber Peg for Wiper Blade
Series 2 & 2A Wiper Blade Ref: GWB128
Application: Series 2 & 2A vehicles with spoon end wiper arms.
Descrition: Stainless steel sprung frame 10" wiper blades by Tex Classic. Spoon fit to wiper arms.

Price: 13.45 (16.14 Including VAT at 20%)



Series 2 & 2A Wiper Blade
Wiper Blade 10" Series3 Ref: LR009343
Application: Series 3 fitted with 5.2mm bayonet end wiper arms.
Description: 10" wiper blades with stainless steel sprung frame made by Tex Classic.

Price: 11.41 (13.69 Including VAT at 20%)





Related products:
1. Wiper Arm Series3 LH (Ref: RTC819)
Wiper Blade 10
Wiper Blade 10" Series3 Ref: PRC1330DD
Application: Series 3 fitted with 5.2mm or 7.0mm bayonet end wiper arms.

Description: 10" wiper blades with black finished sprung frame. Supplied with adaptors to suit either 5.2mm or 7.0mm wide arms.

Price: 2.80 (3.36 Including VAT at 20%)



Wiper Blade 10
Wiper Blade Series 3 Flat Type Ref: PRC1330=
Application: Series2A from suffix G and Series3.

Description: 10" long flat blade with black finish frame for wiper arms 5.2mm wide.

Old part number: GWB274

Price: 2.72 (3.26 Including VAT at 20%)



Wiper Blade Series 3 Flat Type
Wiper Blade 18" Ref: PRC1554
Application: Range Rover Classic 1972 to 1995.

Description: 18" wiper blade with stainless steel support by 'TEX'. Suitable for both front and rear screens on Range Rover Classic.

Price: 31.09 (37.31 Including VAT at 20%)



Wiper Blade 18
Wiper Arm Ref: 261503
Application: Series One - all years.
Description: Reproduction wiper arm from Tex Classic. Adjustable length from 22 to 29cm (8.7" to 11.4"), 1/4" collet fixing

Price: 22.55 (27.06 Including VAT at 20%)




People who bought this item also bought:
1. Set of Rivets for Bonnet Strip (Ref: 68087x12)
2. Wiper Blade (Ref: 261504)
3. Bonnet Rest Strip (Ref: 300824A)
Wiper Arm
RH Wiper Arm Ref: 37H7847
Application: Series 2 & 2A with 2 wiper motors.

Description: Spline fitting wiper arm with RH cranked spoon end. Made by Tex Classic.

Overall length 25cm (10")

Price: 16.90 (20.28 Including VAT at 20%)



RH Wiper Arm
LH Wiper Arm Ref: 37H7848
Application: Series 2 & 2A with 2 wiper motors.

Description: Spline fitting wiper arm with LH cranked spoon end. Made by Tex Classic.

Overall length 25cm (10")

Price: 16.90 (20.28 Including VAT at 20%)



LH Wiper Arm
Page:   <<   <  1  2  3   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Steering Arm - Series 1

Steering Arm - Series 1

17.82

Application: Series 1 models 1948 to 1956 approx.

Description: Drop arm for early type steering box. This arm is held in place with a pinch bolt.

Approximate dimensions: Overall length 17.4cm(6.9")

find out more

'D' Washer - Pedal Shaft

'D' Washer - Pedal Shaft

0.96

Application: Series 1 models.

Description: 'D' washer for support shaft for brake and clutch pedals.

Approximate dimensions: Outside diameter 38mm(1.5"), thickness 3mm(1/8").


find out more

Fixing Kit for Manifolds - Metric

Fixing Kit for Manifolds - Metric

12.83

Application: Series 3 from 1980 with 2.25 litre petrol engine.

Description: Metric threaded kit of fixings to hold manifolds to cylinder head. Kit includes 6 bolts, 2 set screws, 3 studs, 9 plain washers, 11 lock washers, 3 nuts, 2 clamps and 2 lockers

find out more

Fixing Kit for Manifolds - Imperial

Fixing Kit for Manifolds - Imperial

10.20

Application: Series 2 and Series 3 to approx 1980 with 2.25 litre petrol engine.

Description: Imperial (inch) threaded kit of fixings to hold manifolds to cylinder head. Kit includes 6 bolts, 2 set screws, 3 studs, 9 plain washers, 11 lock washers, 3 nuts, 2 clamps and 2 lockers

find out more

Shackle Plate Rear

Shackle Plate Rear

11.16

Application: Series1 1948 to 1953.

Description: Shackle plate for rear springs with plain 9/16" diameter holes.

Approximate dimensions: Length 113mm(4.45"), width 38mm(1.5"), thickness 9.2mm(0.36")
find out more

Shackle Plate Rear

Shackle Plate Rear

13.02

Application: Series 1 1948 to 1953.

Description: Shackle plate for rear springs with 1/2"BSF threaded holes.

Approximate dimensions: Length 113mm(4.45"), width 38mm(1.5"), thickness 9.2mm(0.36")

find out more

Clip for 3/16" Brake Pipe

Clip for 3/16

1.39

Application: Series1, Series2/2A and Series3 models.

Description: Reproduction stainless steel clip for brake pipes. Intended for 3/16" pipe, but will work with 1/4" diameter pipe also.

Approximate dimensions: Length 20mm(0.8"), width 10mm(3/8"), height 5mm(0.2"), hole diameter 4mm(0.16").

find out more

Rear End-plate for Cylinder Head

Rear End-plate for Cylinder Head

97.66

Application: Series 1 petrol models 1948 to 1958, Series 2 models with 2 litre petrol engine.

Description: Reproduction end plate in cast aluminium with mounting aperature for thermo switch.

Approximate dimensions: Length 91mm(3.6"), height 84mm(3.3"), depth 18.4mm(0.72")

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -