Digital Dispensary

Product Sections


Best Sellers

Black High Tension Lead, Copper Cored

Black High Tension Lead, Copper Cored

1.86

Application: Series One and Series Two
Description: Black high tension cable for spark plugs. 7mm(0.28") outside diameter with 19 strand copper core.

Sold by the metre
find out more

Spark Plug Champion N5C

Spark Plug Champion N5C

2.00

Application: Series 2A and Series 3 4 cylinder engines with 7:1 compression ratio and all 6 cylinder Series engines. Also applicable to Series 1 engines.
Description: Champion N5C spark plug, original equipment.
Supersession of Series 1 part number 262796.
find out more

Gaiter for Main Gear Lever

Gaiter for Main Gear Lever

2.16

Application: Series 1, Series 2, Series 2A and Series 3 4 & 6 cylinder models.

Description: Reproduction rubber gaiter for main gear lever.

Approximare dimensions: 11.5cm(4.5") square, 3.6cm(1.4") high.

find out more

Contact Breakers Lucas 25D

Contact Breakers Lucas 25D

3.00

Application: Lucas 25D 4cylinder distributor as fitted to Series 2A and early Series 3 petrol engines, also used on late Series 1 engines with the DM2 distributor.

Description: Lucas boxed contact breaker set also known as 'points'.

Original part number 269987.

find out more

Replacement Condensor for Lucas 25D

Replacement Condensor for Lucas 25D

2.68

Application: Lucas 25D 4cylinder distributor as fitted to Series 2A and early Series 3 petrol engines.Also used on late Series 1 engines.

Description: No longer Lucas boxed condensor as the Lucas ones have a different connector on lead now that makes fixing ackward. So now sourcing from good after market source to original style of Lucas unit!

Approximate dimensions: overall diameter 17mm (0.67 inches), lead 57mm (2.24 inches).

Original part numbers 269988, 245007. DCB101, GSC101

find out more

Pack of 10 7/16" BSF Plain Nuts

Pack of 10 7/16

1.92

Pack of ten 7/16" BSF plain nuts, 45/64"(17.8mm) across flats, 3/8"(9.3mm) high.
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Brass Nut 5/16"BSF

Brass Nut 5/16

1.66

Application: Series1 exhaust manifold.

Description: Brass nut 5/16"BSF for holding downpipe to exhaust manifold.

Approximate dimensions: 3/8"(9.5mm) high, 17/32"(13.5mm) across flats.

find out more

Gaiter for Handbrake Lever

Gaiter for Handbrake Lever

2.70

Application: Late Series 2A and Series 3.

Description: Reproduction rubber gaiter for handbrake lever. This is for the later style lever that curves upwards to nearly vertical.

Approximate dimensions: Height 168mm(6.6"), depth 110mm(4.3")

find out more

These Superb Prices are ONLY available when you order ON-LINE

Page:   <<   <  1  2  3  4  5  ...   >   >>
Holder Viscous Fan Hub Ref: 303-1334
Application: Defender 2007 onwards with Ford Puma TD4 engine.
Description: Tool to hold viscous hub and facilitate it's removal.
Overall length 67.5cm (26.6")
Alternative part number: AG-1012

Price: 65.41 (78.49 Including VAT at 20%)



Holder Viscous Fan Hub
Crank Holding Tool Ref: 303-1437
Application: 5.0 litre V8 petrol (gasolene) and 3.0 litre V6 petrol (gasolene) engines.

Description: Reaction tool for holding crankshaft to allow removal of crank nose bolt . NB not suitable for the TDV6 (diesel) engine.

Approximate dimensions: Overall length 31cm(12.2")




Crank Holding Tool
Camshaft Timing Alignment Tools Ref: 303-1445
Application: Discovery 4, Range Rover L322 and Sport when fitted with 5 litre V8 petrol (gasolene) engine.

Description: Pair of tools to align and then lock into position the camshafts of the 5 litr V8 petrol.

Approximate dimensions: Overall length of each clamp 17.7cm(7")

Price: 128.72 (154.46 Including VAT at 20%)



Camshaft Timing Alignment Tools
Crankshaft Timing Tool Ref: 303-1447
Application: Discovery 4, Range Rover L322 and Sport when fitted with 5 litre V8 petrol (gasolene) engine.

Description: Crankshaft timing tool.

Approximate dimensions: Overall length 48mm(1.9")

Price: 48.81 (58.57 Including VAT at 20%)



Crankshaft Timing Tool
Flywheel Locking Tool Ref: 303-1448
Application: Discovery 4, Range Rover L322 and Sport when fitted with 5 litre V8 petrol (gasolene) engine.

Description: Flywheel locking tool.

Approximate dimensions: Overall length 17.7cm(7")

Price: 51.11 (61.33 Including VAT at 20%)



Flywheel Locking Tool
Tensioner - Timing Chain Ref: 303-1482
Application: Discovery 4, Range Rover L322 and Sport when fitted with 5 litre V8 petrol (gasolene) engine.

Description: Timing chain tensioning tool.

Approximate dimensions: Overall length 20cm(7.9")


Price: 55.09 (66.11 Including VAT at 20%)



Tensioner - Timing Chain
Fuel Pump Camshaft Aligner Ref: JLR-303-1621
Application: TDV6 3litre as fitted to Discovery 4, Range Rover L322 and Range Rover Sport.

Description: Tool to align fuel pump to camshaft.

Approximate dimensions: Overall length 81mm(3.2")

Price: 76.95 (92.34 Including VAT at 20%)



Fuel Pump Camshaft Aligner
Remover/Installer Crankshaft Seal Ref: JLR-303-1619
Application: Defender 2007-2016 with Puma TDCi engine.

Description: Tool for removing and installing crankshaft seal.

Approximate dimensions: Overall diameter 100mm(4")

Price: 62.85 (75.42 Including VAT at 20%)



Remover/Installer Crankshaft Seal
Installer Oil Seal Ref: 307-520
Application: Freelander2 and Evoque.

Description: Installer for oil seal. Beleived to be on front differential.

Approximate dimensions: Overall length 19.4cm(7.6"), overall diameter 90mm(3.5")

Price: 109.34 (131.21 Including VAT at 20%)



Installer Oil Seal
Remover Pinion Oilseal Ref: 308-529
Application: Freelander 2 and Evoque.

Description: Remover for pinion oilseal. Use with slide hammer LRT-99-004.

Approximate dimensions: Overall length 14cm(5.5")

Price: 117.34 (140.81 Including VAT at 20%)





Related products:
1. Impuse Extractor (Slide Hammer) - Main Tool (Ref: LRT-99-004)
Remover Pinion Oilseal
Page:   <<   <  1  2  3  4  5  ...   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

LH Wing Front Panel

LH Wing Front Panel

147.90

Application: Series 2 and Series 2A to approximately 1969.

Description: Reproduction wing front panel in aluminium.

Approximate dimensions: 47cm(18.5") by 39cm(15.4")

find out more

RH Wing Front Panel

RH Wing Front Panel

147.90

Application: Series 2 and Series 2A to approximately 1969.

Description: Reproduction wing front panel in aluminium.

Approximate dimensions: 47cm(18.5") by 39cm(15.4")

find out more

Gasket for Pinion Oil Seal - Salisbury

Gasket for Pinion Oil Seal - Salisbury

0.42

Application: Series 3 long wheel base and Defender 110 when fitted with Salisbury rear axle.

Description: Gasket for pinion oil seal.

Approximate dimensions: Outside diameter 80.5mm(3.17"), inside diameter 70mm(2.75"), 1mm(0.040") thick.

find out more

Gasket for Salisbury Diff Pan

Gasket for Salisbury Diff Pan

1.02

Application: Series 3 long wheel base and Defender 110 when fitted with Salisbury back axle.

Description: Cork gasket for Salisbury differential access pan.

Approximate dimensions: 31cm(12.2") x 28cm(11") x 1mm(0.040") thick.

find out more

Lock Nut - Salisbury Pinion

Lock Nut - Salisbury Pinion

5.52

Application: Series 3 long wheel base and Defender 110 when fitted with Salisbury back axle.

Description: Lock Nut for pinion shaft on Salisbury differential.

Approximate dimensions: 32mm(1.25") across flats, length 17.5mm(0.69"), thread 7/8"UNF.

find out more

Castellated Nut

Castellated Nut

0.96

Application: Series 1, Series 2, Series 3, Range Rover Classic and Defender.

Description: Castellate nut for retainig differential drive flange and also for retaining output flanges on LT76 gearbox.

Approximate dimesions: 12(25.4mm) across flats, 13.7mm(0.54") long.

find out more

Drive Flange for Differential

Drive Flange for Differential

9.60

Application: Series 1, Series 2, Series 2A, Series 3, Range Rover Classic and Defender with Rover type differentials.

Description: Replacement differential drive flange with 4 spline pinion shaft.

Approximate dimesions: Flange 80mm(3.15") x 70.5mm(2.78"), length 47.5mm(1.87"), internal diameter 25.8mm(1.02").

find out more

Second Speed Gear Pair

Second Speed Gear Pair

52.99

Application: Series 1 and Series 2 up to suffix 'C' inclusive gearboxes.

Description: Replacement matched pair of gears for second speed in part - syncromesh gearboxes.

Approximater dimensions: Mainshaft gear: outside diameter 92mm(3.62"), inside diameter 39.8mm(1.57"), length 32mm(1.26"), 29 teeth.
Layshaft gear: outside diameter 70.6mm(2.78"), inside diameter 33.5mm(1.32"), length 27mm(1.06"), 22 teeth, 10 internal splines.

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -