Digital Dispensary

Product Sections


Best Sellers

Brass Nut 5/16"BSF

Brass Nut 5/16

1.66

Application: Series1 exhaust manifold.

Description: Brass nut 5/16"BSF for holding downpipe to exhaust manifold.

Approximate dimensions: 3/8"(9.5mm) high, 17/32"(13.5mm) across flats.

find out more

Grommet - Brake Pipe Support

Grommet - Brake Pipe Support

0.31

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Grommet to support brake pipe on rear axle casing. Used with clip 56666.
Approximate dimensions: overall length 21.5mm(0.85"), inside diameter 7mm(0.3"), outside diameter 14.5mm(0.6")
find out more

Clip for brake pipe grommet

Clip for brake pipe grommet

0.61

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Clip for brake pipe support grommet 6860L. Used on rear axle casing on all Series models from 1954 to 1984.
Approximate dimensions: 11mm(7/16") wide, 34mm(1.3") long, mounting hole 5mm(0.2") diameter, internal diameter of clip when closed 13mm.
find out more

Ignition Coil

Ignition Coil

30.11

Application: Series 1 and Series 2.
Description: Reproduction ignition coil with screw in high tension connection. Supplied with acorn nut and split washer.
Approximate dimensions: Body diameter 54.8mm(2.2"), height 15cm(5.9")
find out more

Stud for Exhaust Manifold

Stud for Exhaust Manifold

1.85

Application: Series 1 1.6 and 2.0 litre, Series 2 2 litre.

Description: Stud to hold downpipe to exhaust manifold.

Approximate dimesions: 5/16"BSF threads to both ends, overall length 1.25"(32mm)

find out more

Black High Tension Lead, Copper Cored

Black High Tension Lead, Copper Cored

1.86

Application: Series One and Series Two
Description: Black high tension cable for spark plugs. 7mm(0.28") outside diameter with 19 strand copper core.

Sold by the metre
find out more

Rocker Cover Gasket

Rocker Cover Gasket

7.72

Application: 1.6ltr and 2.0ltr petrol (gasolene) engines.

Description: Gasket for rocker cover to cylinder head.
find out more

Gasket Exhaust Manifold to Down Pipe

Gasket Exhaust Manifold to Down Pipe

0.96

Application: Series 1, 2 & 3 four cylinder engines.
Description: Square flange gasket for exhaust. Used on various exhaust manifolds and on some pipe to pipe exhaust joints.
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > BOOKS and Publications > Series Land Rovers
Page:  1  2  3   >   >>
Series 1 Workshop Manual Ref: 4291
Land-Rover 1948-58 Series 1 Workshop Manual.
Brooklands Books reprint of Official Land Rover manual.
This covers both petrol and diesel models up to 1958, with many diagrams, drawings and charts.
Soft back X" x Y", 384 Pages


Price: 27.50



Series 1 Workshop Manual
Parts Catalogue 1948-53 Series 1 Ref: 4051
A Brooklands book reprint of the Official Land Rover parts book.
The parts book is an absolute must for anyone embarking on a rebuild. The exploded diagrams alone more than justify it's purchase.
The manual is in 3 sections; section I 1948-51, section II 1952-53 and section III extra equipment and special vehicles. Each section has it's own numerical index.
Soft back 7.8" x 10.6", 434 pages
Models covered Series I 1948-53

Price: 27.50



Parts Catalogue 1948-53 Series 1
Parts Catalogue 1954-58 Series I Models Ref: 4107
A Brooklands book reprint of the Official Rover Co parts book.
The parts book is an absolute must for anyone embarking on a rebuild. The exploded diagrams alone more than justify it's purchase.
The manual covers standard and optional equipment parts. Includes sections on the Fire Tender and Trailer.
Soft back 7.9" x 10.7", 436 pages
Models covered Series I 1954-58 86, 88, 107 & 109

Price: 27.50




People who bought this item also bought:
1. Instruction Manual Land-Rover 1948-58 Series I -Petrol (Ref: 4277)
Parts Catalogue 1954-58 Series I Models
Instruction Manual Land-Rover 1948-58 Series I -Petrol Ref: 4277
By the Rover Company Ltd., reprinted by Brookland Books
Instruction manual for all petrol engined Series I's. With General Data, Controls and Instruments, Standard Body Fittings, Routine Maintenance, Fault Finding and Wiring Diagrams.
Soft bound 8.5" x 11", 58 Pages
Models covered Series I

Price: 13.95




People who bought this item also bought:
1. Parts Catalogue 1954-58 Series I Models (Ref: 4107)
Instruction Manual Land-Rover 1948-58 Series I -Petrol
Instruction Manual Land-Rover Series I & II Diesel Ref: 4343
Owners manual published by The Rover Company Ltd. reprinted by Brookland Books.
Instruction manual for Series I and Series II 88 and 109 models fitted with the Rover 2-litre diesel engine. With General Data, Controls and Instruments, Standard Body Fittings, Routine Maintenance, Fault Finding and Wiring Diagrams.
Soft bound 8.5" x 11", 58 Pages
Models covered Series I & Series II

Price: 13.95



Instruction Manual Land-Rover Series I & II Diesel
Series 1 Restoration - Practical Classics Ref: ZZBOOKA-LRPC
practical CLASSICS & Car Restorer on
LAND ROVER RESTORATION
Reprinted from Practical Classics magazine. Updated reprint August 2007.
A collection of 19 articles following the rebuilding of 'K for Katie' a 1957 swb series I that features on the front cover. 
Soft back 7.9" x 10.6", 72 Pages.
Models covered: Series I


Price: 12.56



Series 1 Restoration - Practical Classics
Land Rover Series II &IIA Repair Operation Manual Ref: AKM8159
Official Land Rover manual reprinted by Brookland Books
Combined manual with parts A & B under one cover.
Covers all areas of the Series II & IIA Land Rover including specifications, maintenance schedules, wiring diagrams etc 
Soft back 8.25" x 11.5", over 500 Pages
Models covered - Series II &IIA 1958 - 1971, 4 & 6cyl petrol engines, 4cyl diesel engines.

Price: 44.95



Land Rover Series II &IIA Repair Operation Manual
Land Rover 2 - 2A - 3 Owners Workshop Manual Ref: ZZBOOKB-LR70WH
by the Autobooks Team of Writers and Illustrators, reprinted by Brookland Books
Workshop manual covering 4, 6 & 8 cylinder engined Land Rovers. 14 chapters plus appendices and data sections. This is a fairly superficial manual as it tries to cover so much in so few pages, never-the-less it is useful and quite adequate for basic repairs.
Soft back 7.9" x 10.6", 256 Pages.
Models covered Series II, Series IIA and SeriesIII

Price: 15.25



Land Rover 2 - 2A - 3 Owners Workshop Manual
LAND ROVER Series II, IIA & III Petrol & Diesel Ref: ZZHAYNES5568
1958 to 1985 4-cyl Petrol Haynes Service and Repair Manual by J.H. Haynes and M.S. Daniels
Following the standard Haynes format, this a good workshop manual for the novice. 14 chapters plus 4 reference sections and index.
Hard back 8.4" x 10.9", 192 Pages
Models covered Series II, series IIA, series III.

Price: 17.80



LAND ROVER Series II, IIA & III Petrol & Diesel
Parts Catalogue Series II & IIA Models Ref: 605957
A Brooklands Books reprint of the Official Land Rover parts catalogue.
The parts book is an absolute must for anyone embarking on a rebuild. The exploded diagrams alone more than justify it's purchase.
This manual covers bonneted control models of the SerII & SerIIA up to about 1966. It covers the 2ltr petrol and diesel engines as well as the more normal 2.25 versions, plus the 6cyl 2.6ltr petrol.
Does not cover optional equipment - see RTC9842CE.
Soft back 8.4" x 11.5", 312 pages
Models covered Series II & IIA 1958 to 1966 88 & 109

Price: 28.23




People who bought this item also bought:
1. User Handbook Ser2A Military 24v Vehicles (Ref: 18358)
Parts Catalogue Series II & IIA Models
Digital Dispensary > BOOKS and Publications > Series Land Rovers
Page:  1  2  3   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Lever Arm for 4WD Select

Lever Arm for 4WD Select

15.80

Application: Series 1 to 1955.

Description: Lever arm with bronze bush to middle hole for selection of four wheel drive in high ratio.

Approximate dimensions: Overall length 116mm(4.6"), width 15.5mm(0.61"), thickness 6mm(0.24"), distance from centre of bushed hole to centre of slotted hole 36mm(1.42"), distance from centre of bushed hole to other hole is 68mm(2.67")

find out more

Olive for Vacuum Pipe

Olive for Vacuum Pipe

0.84

Application: Series 1 and Series2 with Solex 32PBI carburettor.

Description: Brass olive for use with 1/8" copper pipe.

Approximate dimensions: Length 4.7mm(0.19"), outside diameter 4.7mm(0.19"), internal dimater 1/8"(3.2mm).

find out more

Male Union for Vacuum Pipe

Male Union for Vacuum Pipe

2.40

Application: Series 1 and Series 2A.

Description: Brass male union for 1/8" copper pipe. Threaded to fit Solex 32PBI.

Aproximate dimensions: Length 10mm(0.39"), internal diameter 1/8"(3.2mm), hex 9mm(0.35") across flats, thread 1/4"BSF.

find out more

Grommet for vacuum pipe

Grommet for vacuum pipe

3.83

Application: Series 1 and Series 2A.

Description: Split rubber grommet for us with 214228 retaining clip. Used on 1/8" diameter copper vacuum pipe.

Approximate dimensions: Length 17mm(0.67"), internal diameter 3mm(1/8"), overall diameter 9mm(0.35")

find out more

Retaining Clip for Vacuum Pipe

Retaining Clip for Vacuum Pipe

2.78

Application: Series 1 and Series 2A.

Description: Retaining clip for copper vacuum pipe for advance and retard.

Approximate dimensions: 41.5mm(1.6") x 13mm(0.5") x 9mm(0.35"). Mounting hole 7mm(0.28")

find out more

Installer Oil Seal

Installer Oil Seal

33.79

Application: Evoque and Freelander 2.

Description: Installer for bellhousing differential oil seal. Use with 307-520.

Approximate dimensions: Overall diameter 80mm(3.15"), inside diameter 54mm(2.13"), height 48.5mm(1.9").

find out more

Installer Oilseal

Installer Oilseal

155.89

Application: Evoque and Freelander 2.

Description: Installer for quillshaft oil seal. Use with 307-520.

Approximate dimensions: Overall diameter 80mm(3.15"), height 64mm(2.52").


find out more

Pinion Bearing for Salisbury Differential

Pinion Bearing for Salisbury Differential

12.37

Application: Series 3 Long Wheel Base and Defender 110 models with rear Salisbury axle.

Descrtiption: Timken/Japanese sourced outer pinion taper roller bearing for Salisbury differentials.

Approximate dimensions: Outside diameter 2.85"(72.3mm), inside diameter 1 3/8"(34.9mm), depth 26.7mm(1.05")

Bearing numbers: HM88649/ HM88610

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -