Digital Dispensary

Product Sections


Best Sellers

Brass Nut 5/16"BSF

Brass Nut 5/16

1.66

Application: Series1 exhaust manifold.

Description: Brass nut 5/16"BSF for holding downpipe to exhaust manifold.

Approximate dimensions: 3/8"(9.5mm) high, 17/32"(13.5mm) across flats.

find out more

Grommet - Brake Pipe Support

Grommet - Brake Pipe Support

0.31

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Grommet to support brake pipe on rear axle casing. Used with clip 56666.
Approximate dimensions: overall length 21.5mm(0.85"), inside diameter 7mm(0.3"), outside diameter 14.5mm(0.6")
find out more

Clip for brake pipe grommet

Clip for brake pipe grommet

0.61

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Clip for brake pipe support grommet 6860L. Used on rear axle casing on all Series models from 1954 to 1984.
Approximate dimensions: 11mm(7/16") wide, 34mm(1.3") long, mounting hole 5mm(0.2") diameter, internal diameter of clip when closed 13mm.
find out more

Ignition Coil

Ignition Coil

30.11

Application: Series 1 and Series 2.
Description: Reproduction ignition coil with screw in high tension connection. Supplied with acorn nut and split washer.
Approximate dimensions: Body diameter 54.8mm(2.2"), height 15cm(5.9")
find out more

Stud for Exhaust Manifold

Stud for Exhaust Manifold

1.85

Application: Series 1 1.6 and 2.0 litre, Series 2 2 litre.

Description: Stud to hold downpipe to exhaust manifold.

Approximate dimesions: 5/16"BSF threads to both ends, overall length 1.25"(32mm)

find out more

Black High Tension Lead, Copper Cored

Black High Tension Lead, Copper Cored

1.86

Application: Series One and Series Two
Description: Black high tension cable for spark plugs. 7mm(0.28") outside diameter with 19 strand copper core.

Sold by the metre
find out more

Rocker Cover Gasket

Rocker Cover Gasket

7.72

Application: 1.6ltr and 2.0ltr petrol (gasolene) engines.

Description: Gasket for rocker cover to cylinder head.
find out more

Gasket Exhaust Manifold to Down Pipe

Gasket Exhaust Manifold to Down Pipe

0.96

Application: Series 1, 2 & 3 four cylinder engines.
Description: Square flange gasket for exhaust. Used on various exhaust manifolds and on some pipe to pipe exhaust joints.
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > LAND Rover Series One Parts > Land Rover Series One Electrical Parts
Page:   <<   <  1  2  3   >   >>
Brakelight Switch Series 1 - replacement Ref: 7160D
Application: Series One Land Rovers 1948 to 1958.

Description: Replacement pull-on type of brakelight switch. Please note that this is not a direct replacement and requires a little fettling to use.

Approximate dimensions: Mounting hole centres 26mm (1")

Price: 5.31 (6.37 Including VAT at 20%)




People who bought this item also bought:
1. Gaiter for High/Low Gear Lever (Ref: 338871=)
2. Gasket Swivel Housing to Axle Tube (Ref: 232413)
3. Rear Hub Oil Seal (Ref: 236923)
Brakelight Switch Series 1 - replacement
Pair of Electrical Sockets Ref: CAB189
Application: Series 1, 2 & 3.
Description: Pair of sockets for charging and/or auxilliary electrical equipment. One negative and one positive terminal. Good quality to original pattern.


Price: 19.42 (23.30 Including VAT at 20%)




People who bought this item also bought:
1. Gaiter for High/Low Gear Lever (Ref: 338871=)
2. Gasket Swivel Housing to Axle Tube (Ref: 232413)
3. Rear Hub Oil Seal (Ref: 236923)
Pair of Electrical Sockets
2 Pin Plug Ref: CAB185
Application: Series 1, Series 2/2A and Series 3.

Description: Reproduction plug for the auxilliary sockets on dashboard. Good quality plug to original pattern.

Price: 19.42 (23.30 Including VAT at 20%)



2 Pin Plug
Voltage Regulator Ref: 235553
Application: Series 1 petrol models, also early Series 2/2A petrol models to chassis suffix 'C'.
Description: Reproduction of Lucas 37182 voltage regulator.
Approximate dimensions: Base 85mm(3.3") by 80mm(3.1"), 90mm(3.5") high.

Price: 36.50 (43.80 Including VAT at 20%)



Voltage Regulator
Wiper Motor with switch Ref: ZZS14602
Application: Series 1 and Series 2 with twin wiper motors.
Description: Affordable replacement 12volt 4amp wiper motor. Functional but not cosmetically correct. This motor has a 8mm(0.31") diameter shaft 63mm(2.5") long. Through this projects a 6mm(0.24") diameter spindle which rotates through an arc of 110 degrees.

Price: 63.54 (76.25 Including VAT at 20%)



Wiper Motor with switch
Cable Tie 'D' Ref: 240431
Application: Series 1, 2 & 3.
Description: Rubberised cable tie. Overall length 158mm (6.22")

Price: 1.27 (1.52 Including VAT at 20%)



Cable Tie 'D'
Headlamp Rim 7" Ref: 274379
Application: Series 1 and Series 2.

Description: Reproduction chromed headlamp rim of the 3 adjuster type for 7" lamps. Equivalent to Lucas 554872

Approximate dimensions: overall diameter 196mm(7.72"), height 23mm(0.91")

Price: 17.79 (21.35 Including VAT at 20%)



Headlamp Rim 7
Headlamp Outer Rim Ref: 272592
Application: Series 1 1957-58, Series 2 to 1961.

Description: Chrome plated headlamp outer rim.

Approximate dimensions: Outside diameter 20.5cm(8.07"), inside diameter 18.3cm(7.2"), depth 2.4cm(0.95")


Price: 15.87 (19.04 Including VAT at 20%)



Headlamp Outer Rim
Side Lamp Ref: 236102
Application: Series One Land Rover

Description: Beautiful reproduction side lamp with glass lens.

Price: 44.95 (53.94 Including VAT at 20%)



Side Lamp
Rear 'D' Lamp - two bulb holders Ref: 217618D
Application: Series One Land Rover.

Description: Reproduction 'D' lamp. Rear facing lens are red glass, number plate lens is clear plastic. Fitted with 1x 5watt single filament bulb for number plate illumination and lower lens of 'D', 1x 21/5watt bulb for upper part of 'D'. With some fiddling and a change of bulb the upper bulb holder could be used for indicator cum brake light.

Back in stock.

Price: 105.00 (126.00 Including VAT at 20%)



Rear 'D' Lamp - two bulb holders
Digital Dispensary > LAND Rover Series One Parts > Land Rover Series One Electrical Parts
Page:   <<   <  1  2  3   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Lever Arm for 4WD Select

Lever Arm for 4WD Select

15.80

Application: Series 1 to 1955.

Description: Lever arm with bronze bush to middle hole for selection of four wheel drive in high ratio.

Approximate dimensions: Overall length 116mm(4.6"), width 15.5mm(0.61"), thickness 6mm(0.24"), distance from centre of bushed hole to centre of slotted hole 36mm(1.42"), distance from centre of bushed hole to other hole is 68mm(2.67")

find out more

Olive for Vacuum Pipe

Olive for Vacuum Pipe

0.84

Application: Series 1 and Series2 with Solex 32PBI carburettor.

Description: Brass olive for use with 1/8" copper pipe.

Approximate dimensions: Length 4.7mm(0.19"), outside diameter 4.7mm(0.19"), internal dimater 1/8"(3.2mm).

find out more

Male Union for Vacuum Pipe

Male Union for Vacuum Pipe

2.40

Application: Series 1 and Series 2A.

Description: Brass male union for 1/8" copper pipe. Threaded to fit Solex 32PBI.

Aproximate dimensions: Length 10mm(0.39"), internal diameter 1/8"(3.2mm), hex 9mm(0.35") across flats, thread 1/4"BSF.

find out more

Grommet for vacuum pipe

Grommet for vacuum pipe

3.83

Application: Series 1 and Series 2A.

Description: Split rubber grommet for us with 214228 retaining clip. Used on 1/8" diameter copper vacuum pipe.

Approximate dimensions: Length 17mm(0.67"), internal diameter 3mm(1/8"), overall diameter 9mm(0.35")

find out more

Retaining Clip for Vacuum Pipe

Retaining Clip for Vacuum Pipe

2.78

Application: Series 1 and Series 2A.

Description: Retaining clip for copper vacuum pipe for advance and retard.

Approximate dimensions: 41.5mm(1.6") x 13mm(0.5") x 9mm(0.35"). Mounting hole 7mm(0.28")

find out more

Installer Oil Seal

Installer Oil Seal

33.79

Application: Evoque and Freelander 2.

Description: Installer for bellhousing differential oil seal. Use with 307-520.

Approximate dimensions: Overall diameter 80mm(3.15"), inside diameter 54mm(2.13"), height 48.5mm(1.9").

find out more

Installer Oilseal

Installer Oilseal

155.89

Application: Evoque and Freelander 2.

Description: Installer for quillshaft oil seal. Use with 307-520.

Approximate dimensions: Overall diameter 80mm(3.15"), height 64mm(2.52").


find out more

Pinion Bearing for Salisbury Differential

Pinion Bearing for Salisbury Differential

12.37

Application: Series 3 Long Wheel Base and Defender 110 models with rear Salisbury axle.

Descrtiption: Timken/Japanese sourced outer pinion taper roller bearing for Salisbury differentials.

Approximate dimensions: Outside diameter 2.85"(72.3mm), inside diameter 1 3/8"(34.9mm), depth 26.7mm(1.05")

Bearing numbers: HM88649/ HM88610

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -