Digital Dispensary

Product Sections


Best Sellers

Brass Nut 5/16"BSF

Brass Nut 5/16

1.66

Application: Series1 exhaust manifold.

Description: Brass nut 5/16"BSF for holding downpipe to exhaust manifold.

Approximate dimensions: 3/8"(9.5mm) high, 17/32"(13.5mm) across flats.

find out more

Grommet - Brake Pipe Support

Grommet - Brake Pipe Support

0.31

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Grommet to support brake pipe on rear axle casing. Used with clip 56666.
Approximate dimensions: overall length 21.5mm(0.85"), inside diameter 7mm(0.3"), outside diameter 14.5mm(0.6")
find out more

Clip for brake pipe grommet

Clip for brake pipe grommet

0.61

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Clip for brake pipe support grommet 6860L. Used on rear axle casing on all Series models from 1954 to 1984.
Approximate dimensions: 11mm(7/16") wide, 34mm(1.3") long, mounting hole 5mm(0.2") diameter, internal diameter of clip when closed 13mm.
find out more

Ignition Coil

Ignition Coil

30.11

Application: Series 1 and Series 2.
Description: Reproduction ignition coil with screw in high tension connection. Supplied with acorn nut and split washer.
Approximate dimensions: Body diameter 54.8mm(2.2"), height 15cm(5.9")
find out more

Stud for Exhaust Manifold

Stud for Exhaust Manifold

1.85

Application: Series 1 1.6 and 2.0 litre, Series 2 2 litre.

Description: Stud to hold downpipe to exhaust manifold.

Approximate dimesions: 5/16"BSF threads to both ends, overall length 1.25"(32mm)

find out more

Black High Tension Lead, Copper Cored

Black High Tension Lead, Copper Cored

1.86

Application: Series One and Series Two
Description: Black high tension cable for spark plugs. 7mm(0.28") outside diameter with 19 strand copper core.

Sold by the metre
find out more

Rocker Cover Gasket

Rocker Cover Gasket

7.72

Application: 1.6ltr and 2.0ltr petrol (gasolene) engines.

Description: Gasket for rocker cover to cylinder head.
find out more

Gasket Exhaust Manifold to Down Pipe

Gasket Exhaust Manifold to Down Pipe

0.96

Application: Series 1, 2 & 3 four cylinder engines.
Description: Square flange gasket for exhaust. Used on various exhaust manifolds and on some pipe to pipe exhaust joints.
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

These Superb Prices are ONLY available when you order ON-LINE

Page:  1  2   >   >>
Bearing Overdrive Ref: 1D3790
Application: Series2 and Series3 models when fitted with Fairey/Superwinch overdrive.

Description: Single row ball bearing of Koyo or similar brand. Fitted to rear of overdrive mainshaft.

Approximate dimensions: Outside diameter 90mm(3.54"), inside diameter 40mm(1.57"), thickness 23mm(0.91")

Bearing number: 6308.

Price: 18.75 (22.50 Including VAT at 20%)



Bearing Overdrive
Hub Sleeve Assembly for Overdrive Ref: 561392
Application: Series1, Series2 and Series3 when overdrive fitted. Suitable for Fairey/ Superwinch made unit.

Description: EU manufactured syncro hub assemby.

Approximate dimensions: Overall diameter 82.5mm(3.25"), inside diameter 27mm(1.06"), thickness 30.5mm(1.2")

Price: 158.05 (189.66 Including VAT at 20%)



Hub Sleeve Assembly for Overdrive
Pivot Assembly for Selector Ref: RTC7160
Application: Series 1, Series 2 and Series 3 models with 4 or 6 cylinder engines. For use with the LT76 gearbox.

Description: Pivot assembly for the selector linkage on the Fairy/Superwinch overdrive.

Price: 94.25 (113.10 Including VAT at 20%)



Pivot Assembly for Selector
'O' Ring kit for Overdrive Ref: RTC7166
Application: Series 1, Series 2 and Series 3 models with 4 or 6 cylinder engines. For use with the LT76 gearbox.

Description: Set of 4 'O' rings for the overdrive. Made in the European Union.

Price: 3.00 (3.60 Including VAT at 20%)



'O' Ring kit for Overdrive
Mainshaft for Overdrive Ref: RTC7168
Application: Series1, Series2 and Series3 when overdrive fitted. Suitable for Fairey/ Superwinch made unit.

Description: EU manufactured mainshaft.

Approximate dimensions: Overall length 28.2cm(11.1")


Price: 181.25 (217.50 Including VAT at 20%)



Mainshaft for Overdrive
Clutch Unit for Overdrive Ref: RTC7170
Application: Series 1, Series 2 and Series 3 models with 4 or 6 cylinder engines. For use with the LT76 gearbox.

Description: This is the coupling into the overdrive from the back of the transfer box. 10 splines internally. Made in the European Union.

Approximare dimensions: Overall length 39mm(1.5"), overall diameter 49.8mm(2.0").


Price: 50.25 (60.30 Including VAT at 20%)



Clutch Unit for Overdrive
Bearing Kit for Clutch Unit Ref: RTC7171
Application: Series 1, Series 2 and Series 3 models with 4 or 6 cylinder engines. For use with the LT76 gearbox.

Description: This is the bearing kit for coupling into the overdrive - RTC7170. Kit contains 1x needle roller bearing and 2x clips Made in the European Union.


Price: 16.34 (19.61 Including VAT at 20%)



Bearing Kit for Clutch Unit
Circlip Set for Overdrive Ref: RTC7172
Application: Series 1, Series 2 and Series 3 models with 4 or 6 cylinder engines. For use with the LT76 gearbox.

Description: Set of 7 rings, 5 circlips and 2 bearing retainers.

Price: 17.95 (21.54 Including VAT at 20%)



Circlip Set for Overdrive
Oil Seal Kit Overdrive Ref: RTC7173
Application: Series 1, Series 2 and Series 3 models with 4 or 6 cylinder engines. For use with the LT76 gearbox.

Description: Pair of oilseals for the overdrive. Made in the European Union.

Approximate dimensions: Larger seal - overall diameter 65mm(2.56"), thickness 12.9mm(0.51"). Smaller seal - overall diameter 58.5mm(2.3"), thickness 4mm(0.16")

Price: 10.23 (12.28 Including VAT at 20%)



Oil Seal Kit Overdrive
Output Bearing for Overdrive Ref: RTC7179
Application: Series 1, Series 2 and Series 3 models with 4 or 6 cylinder engines. For use with the LT76 gearbox.

Description: Roller bearing by NTN (or similar manufacturer).

Approximate dimensions: Overall diameter 92.3mm(3.6"), depth 25mm(1").

Price: 29.14 (34.97 Including VAT at 20%)



Output Bearing for Overdrive
Page:  1  2   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Lever Arm for 4WD Select

Lever Arm for 4WD Select

15.80

Application: Series 1 to 1955.

Description: Lever arm with bronze bush to middle hole for selection of four wheel drive in high ratio.

Approximate dimensions: Overall length 116mm(4.6"), width 15.5mm(0.61"), thickness 6mm(0.24"), distance from centre of bushed hole to centre of slotted hole 36mm(1.42"), distance from centre of bushed hole to other hole is 68mm(2.67")

find out more

Olive for Vacuum Pipe

Olive for Vacuum Pipe

0.84

Application: Series 1 and Series2 with Solex 32PBI carburettor.

Description: Brass olive for use with 1/8" copper pipe.

Approximate dimensions: Length 4.7mm(0.19"), outside diameter 4.7mm(0.19"), internal dimater 1/8"(3.2mm).

find out more

Male Union for Vacuum Pipe

Male Union for Vacuum Pipe

2.40

Application: Series 1 and Series 2A.

Description: Brass male union for 1/8" copper pipe. Threaded to fit Solex 32PBI.

Aproximate dimensions: Length 10mm(0.39"), internal diameter 1/8"(3.2mm), hex 9mm(0.35") across flats, thread 1/4"BSF.

find out more

Grommet for vacuum pipe

Grommet for vacuum pipe

3.83

Application: Series 1 and Series 2A.

Description: Split rubber grommet for us with 214228 retaining clip. Used on 1/8" diameter copper vacuum pipe.

Approximate dimensions: Length 17mm(0.67"), internal diameter 3mm(1/8"), overall diameter 9mm(0.35")

find out more

Retaining Clip for Vacuum Pipe

Retaining Clip for Vacuum Pipe

2.78

Application: Series 1 and Series 2A.

Description: Retaining clip for copper vacuum pipe for advance and retard.

Approximate dimensions: 41.5mm(1.6") x 13mm(0.5") x 9mm(0.35"). Mounting hole 7mm(0.28")

find out more

Installer Oil Seal

Installer Oil Seal

33.79

Application: Evoque and Freelander 2.

Description: Installer for bellhousing differential oil seal. Use with 307-520.

Approximate dimensions: Overall diameter 80mm(3.15"), inside diameter 54mm(2.13"), height 48.5mm(1.9").

find out more

Installer Oilseal

Installer Oilseal

155.89

Application: Evoque and Freelander 2.

Description: Installer for quillshaft oil seal. Use with 307-520.

Approximate dimensions: Overall diameter 80mm(3.15"), height 64mm(2.52").


find out more

Pinion Bearing for Salisbury Differential

Pinion Bearing for Salisbury Differential

12.37

Application: Series 3 Long Wheel Base and Defender 110 models with rear Salisbury axle.

Descrtiption: Timken/Japanese sourced outer pinion taper roller bearing for Salisbury differentials.

Approximate dimensions: Outside diameter 2.85"(72.3mm), inside diameter 1 3/8"(34.9mm), depth 26.7mm(1.05")

Bearing numbers: HM88649/ HM88610

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -