Digital Dispensary

Product Sections


Best Sellers

Brass Nut 5/16"BSF

Brass Nut 5/16

1.66

Application: Series1 exhaust manifold.

Description: Brass nut 5/16"BSF for holding downpipe to exhaust manifold.

Approximate dimensions: 3/8"(9.5mm) high, 17/32"(13.5mm) across flats.

find out more

Grommet - Brake Pipe Support

Grommet - Brake Pipe Support

0.31

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Grommet to support brake pipe on rear axle casing. Used with clip 56666.
Approximate dimensions: overall length 21.5mm(0.85"), inside diameter 7mm(0.3"), outside diameter 14.5mm(0.6")
find out more

Clip for brake pipe grommet

Clip for brake pipe grommet

0.61

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Clip for brake pipe support grommet 6860L. Used on rear axle casing on all Series models from 1954 to 1984.
Approximate dimensions: 11mm(7/16") wide, 34mm(1.3") long, mounting hole 5mm(0.2") diameter, internal diameter of clip when closed 13mm.
find out more

Ignition Coil

Ignition Coil

30.11

Application: Series 1 and Series 2.
Description: Reproduction ignition coil with screw in high tension connection. Supplied with acorn nut and split washer.
Approximate dimensions: Body diameter 54.8mm(2.2"), height 15cm(5.9")
find out more

Stud for Exhaust Manifold

Stud for Exhaust Manifold

1.85

Application: Series 1 1.6 and 2.0 litre, Series 2 2 litre.

Description: Stud to hold downpipe to exhaust manifold.

Approximate dimesions: 5/16"BSF threads to both ends, overall length 1.25"(32mm)

find out more

Black High Tension Lead, Copper Cored

Black High Tension Lead, Copper Cored

1.86

Application: Series One and Series Two
Description: Black high tension cable for spark plugs. 7mm(0.28") outside diameter with 19 strand copper core.

Sold by the metre
find out more

Rocker Cover Gasket

Rocker Cover Gasket

7.72

Application: 1.6ltr and 2.0ltr petrol (gasolene) engines.

Description: Gasket for rocker cover to cylinder head.
find out more

Gasket Exhaust Manifold to Down Pipe

Gasket Exhaust Manifold to Down Pipe

0.96

Application: Series 1, 2 & 3 four cylinder engines.
Description: Square flange gasket for exhaust. Used on various exhaust manifolds and on some pipe to pipe exhaust joints.
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > REGULAR Service and Repair Parts > Fuel System > Injectors - diesel and petrol
Rebuilt Diesel Injector CAV-Lucas Ref: ERR1266E
Rebuilt CAV-Lucas diesel injector - sold singly.

Application: S2a 2.25diesel from suffix K, S3 2.25 diesel, Defender 2.25 diesel, Defender 2.5 diesel and Defender 2.5 diesel turbo.

Price: 45.00 (54.00 Including VAT at 20%)



Rebuilt Diesel Injector CAV-Lucas
New Diesel Injector CAV-Lucas type Ref: ERR1266D
New aftermarket reproduction diesel injector - sold singly.

Application: S2a 2.25diesel from suffix K, S3 2.25 diesel, Defender 2.25 diesel, Defender 2.5 diesel and Defender 2.5 diesel turbo.

Price: 26.10 (31.32 Including VAT at 20%)



New Diesel Injector CAV-Lucas type
Fitting kit for CAV-Lucas Injectors Ref: ERR1266FIT
Fitting kit for CAV-Lucas injectors, kit covers a set of 4 injectors.
Kit comprises; 4x copper washers, 4x steel crush washers, 8x spill rail washers, 8x imperial hold-down nuts, 8x metric hold-down nuts and 8x lock washers.

Price: 2.80 (3.36 Including VAT at 20%)




People who bought this item also bought:
1. Headlamp Connector (Ref: ZZDURITE53951)
2. Hinge Pin Kit (Ref: 330953/7)
3. Spring Ring, Boot to Body of Steering Ball Joint (Ref: 214685)
Fitting kit for CAV-Lucas Injectors
Injector for 200TDi Ref: ETC8412=
Diesel Injector for 200TDi engines - rebuilt by Bosch with new nozzle. Sold singly.

Application: Defender 200TDi, Discovery 200TDI and Range Rover Classic 200TDi.

Price: 198.00 (237.60 Including VAT at 20%)



Injector for 200TDi
Fitting Kit for 200TDi Injectors Ref: ETC8412FIT
Fitting kit for 200TDi injectors, kit covers a set of 4 injectors.
Kit comprises; 4x copper sealing washers, 8x spill rail washers and 4x hold-down nuts.

Price: 2.00 (2.40 Including VAT at 20%)



Fitting Kit for 200TDi Injectors
Injector Diesel Multipoint Ref: MSC100610
Application: Freelander One with 2.0 litre L series diesel engine to chassis YA (approx 199).
Description: Bosch fuel injector with 2 pin connector
Approximate dimensions: Length 180mm(7.1"), nozzle diameter 8mm(0.3").

Price: 167.15 (200.58 Including VAT at 20%)



Injector Diesel Multipoint
Fuel Injector 1.8 Petrol Ref: MJY100550L
Application: Freelander One with 1.8 petrol(gasolene) engine from 2001 onwards.
Description: Fuel injector for multi point injection system on cars with VIN 1A onwards. Connecor is 2 pin.
Approximate dimensions: Overall length 80mm(3.1")

Price: 118.20 (141.84 Including VAT at 20%)



Fuel Injector 1.8 Petrol
Injector for BMW M57 Diesel Engine Ref: MJY000070E
Application: Range Rover L322 with BMW M57 3.0litre diesel engine.

Description: Reconditioned Bosch injector for the M57 engine. Outright purchase, we do not need your old injector in vexchange.

Approximate dimensions: Overall length 22cm(8.7").

Price: 153.14 (183.77 Including VAT at 20%)



Injector for BMW M57 Diesel Engine
Digital Dispensary > REGULAR Service and Repair Parts > Fuel System > Injectors - diesel and petrol

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Lever Arm for 4WD Select

Lever Arm for 4WD Select

15.80

Application: Series 1 to 1955.

Description: Lever arm with bronze bush to middle hole for selection of four wheel drive in high ratio.

Approximate dimensions: Overall length 116mm(4.6"), width 15.5mm(0.61"), thickness 6mm(0.24"), distance from centre of bushed hole to centre of slotted hole 36mm(1.42"), distance from centre of bushed hole to other hole is 68mm(2.67")

find out more

Olive for Vacuum Pipe

Olive for Vacuum Pipe

0.84

Application: Series 1 and Series2 with Solex 32PBI carburettor.

Description: Brass olive for use with 1/8" copper pipe.

Approximate dimensions: Length 4.7mm(0.19"), outside diameter 4.7mm(0.19"), internal dimater 1/8"(3.2mm).

find out more

Male Union for Vacuum Pipe

Male Union for Vacuum Pipe

2.40

Application: Series 1 and Series 2A.

Description: Brass male union for 1/8" copper pipe. Threaded to fit Solex 32PBI.

Aproximate dimensions: Length 10mm(0.39"), internal diameter 1/8"(3.2mm), hex 9mm(0.35") across flats, thread 1/4"BSF.

find out more

Grommet for vacuum pipe

Grommet for vacuum pipe

3.83

Application: Series 1 and Series 2A.

Description: Split rubber grommet for us with 214228 retaining clip. Used on 1/8" diameter copper vacuum pipe.

Approximate dimensions: Length 17mm(0.67"), internal diameter 3mm(1/8"), overall diameter 9mm(0.35")

find out more

Retaining Clip for Vacuum Pipe

Retaining Clip for Vacuum Pipe

2.78

Application: Series 1 and Series 2A.

Description: Retaining clip for copper vacuum pipe for advance and retard.

Approximate dimensions: 41.5mm(1.6") x 13mm(0.5") x 9mm(0.35"). Mounting hole 7mm(0.28")

find out more

Installer Oil Seal

Installer Oil Seal

33.79

Application: Evoque and Freelander 2.

Description: Installer for bellhousing differential oil seal. Use with 307-520.

Approximate dimensions: Overall diameter 80mm(3.15"), inside diameter 54mm(2.13"), height 48.5mm(1.9").

find out more

Installer Oilseal

Installer Oilseal

155.89

Application: Evoque and Freelander 2.

Description: Installer for quillshaft oil seal. Use with 307-520.

Approximate dimensions: Overall diameter 80mm(3.15"), height 64mm(2.52").


find out more

Pinion Bearing for Salisbury Differential

Pinion Bearing for Salisbury Differential

12.37

Application: Series 3 Long Wheel Base and Defender 110 models with rear Salisbury axle.

Descrtiption: Timken/Japanese sourced outer pinion taper roller bearing for Salisbury differentials.

Approximate dimensions: Outside diameter 2.85"(72.3mm), inside diameter 1 3/8"(34.9mm), depth 26.7mm(1.05")

Bearing numbers: HM88649/ HM88610

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -