Digital Dispensary

Product Sections


Best Sellers

Grommet - Brake Pipe Support

Grommet - Brake Pipe Support

0.31

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Grommet to support brake pipe on rear axle casing. Used with clip 56666.
Approximate dimensions: overall length 21.5mm(0.85"), inside diameter 7mm(0.3"), outside diameter 14.5mm(0.6")
find out more

Clip for brake pipe grommet

Clip for brake pipe grommet

0.61

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Clip for brake pipe support grommet 6860L. Used on rear axle casing on all Series models from 1954 to 1984.
Approximate dimensions: 11mm(7/16") wide, 34mm(1.3") long, mounting hole 5mm(0.2") diameter, internal diameter of clip when closed 13mm.
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Gasket Set for Series Gearboxes

Gasket Set for Series Gearboxes

4.20

Application: Series 1, Series 2 & 3 with 4 or 6 cylinder engines.
Description: Set of replacement gaskets for main and transfer gearboxes. Does NOT include seals.
find out more

Water Pump Series1 Petrol

Water Pump Series1 Petrol

51.00

Application: Series 1 1.6ltr & 2.0ltr petrol (gasolene) engines.

Description: Reproduction cast iron water pump, supplied with gaskets.
find out more

Gaiter for High/Low Gear Lever

Gaiter for High/Low Gear Lever

2.46

Application: Series 1, Series 2/2A and Series 3.

Description: Reproduction rubber gaiter for the high/low gear lever.

Approximate dimensions: Overall length 143mm, height 90mm.

find out more

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

13.70

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Copper Ring Water Pump to Thermostat Housing

Copper Ring Water Pump to Thermostat Housing

7.44

Application: Series One with 1.6 or 2 litre petrol engine. Series Two with 2 litre petrol engine.
Description: Copper ring to support 'O' ring between water pump and thermostat housing.
Approximate dimensions: outside diameter 16mm(0.63"), inside diameter 11mm(0.43"), height 7.5mm(0.3")
find out more

Wheel Stud for Series 1

Wheel Stud for Series 1

5.82

Application: All Series One models.

Description: Reproduction wheel stud for Series 1. Threaded 9/16"BSF. Use with nut 217361.

Approximate dimensions: Overall length 52mm(2"), short threaded end 12mm(0.47"), long threaded end 27.5mm(1.08"), land 12.5mm(0.5")

find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > REGULAR Service and Repair Parts > Driveline > Hubs, bearing kits and so forth
Page:  1  2   >   >>
Wheel Hub Series 3 Ref: 576844
Application: Series 3 models to 09/1980 where inner bearing is larger than outer bearing.

Description: Replacement wheel hub with studs but not bearings or seals.

Approximate dimensions: Overall diameter 20cm(7.9"), depth 10.2cm (4")

Price: 60.00 (72.00 Including VAT at 20%)



Wheel Hub Series 3
Series1, 2 & 3 Wheel Bearing Kit with Japanese Bearings Ref: WHEELBRGKIT01N
Application: Series 1 front axle only, Series 2, Series 2A and Series 3 to 1980. Where inner bearing is larger than outer bearing. Covers both long and short wheel base vehicles, suitable for either front or rear wheel.

Description: Kit of parts to service one wheel hub. Kit comprises inner and outer Japanese manufactured wheel bearings (NTN or similar brand), Gaco inner seal, flange gasket, hub nut locker, felt outer seal, 'o' ring outer seal and split pin.

Price: 33.28 (39.94 Including VAT at 20%)



Series1,  2 & 3 Wheel Bearing Kit with Japanese Bearings
Series 3 Hub Bearing Kit Ref: WHEELBRGKIT02
Application: Series 3 1980 onwards, where inner and outer bearings are the same size. Covers both long and short wheel base vehicles, suitable for either front or rear wheel.
Description: Kit of parts to service one wheel hub. Kit comprises a pair of Timken wheel bearings, Gaco inner seal, hub nut locker, flange gasket, 'O' ring outer seal and split pin.

Price: 17.85 (21.42 Including VAT at 20%)




People who bought this item also bought:
1. Felt Seal Stub Shaft to Drive Flange (Ref: RTC3515)
2. Inner Wheel Hub Seal (Ref: RTC3510)
3. Headlamp Rim 7" (Ref: 274379)
Series 3 Hub Bearing Kit
Classic Range Rover Hub Bearing Kit Ref: WHEELBRGKIT03
Application: Range Rover Classic 1972 to 1985. Suitable for either front or rear wheel.

Description: Kit of parts to service one wheel hub. Kit comprises a pair of Timken wheel bearings, single lip and twin lip Gaco inner seals, flange gasket and hub nut locker.

Price: 19.16 (22.99 Including VAT at 20%)



Classic Range Rover Hub Bearing Kit
Hub Bearing Kit - Defender, Discovery and Classic Range Rover Ref: WHEELBRGKIT04
Application: Defender rear from approx 1985 to 1993, Discovery 1 to 'JA' chassis number (1992) front and rear, Range Rover Classic 1985 to 1995 non-ABS front and rear.

Description: Kit of parts to service one wheel hub. Kit comprises a pair of Timken wheel bearings, Gaco inner seal, replacement outer seal, seal spacer, 2x flange gaskets and hub nut locker.

Price: 23.03 (27.64 Including VAT at 20%)



Hub Bearing Kit - Defender, Discovery and Classic Range Rover
Felt Seal Stub Shaft to Drive Flange Ref: RTC3515
Application: Series 1 front axles, Series 2 front and rear axles, Series 3 SWB front and rear axles.
Description: Felt seal for 10 spline axle shafts to outer drive flanges.
Original part number 272086

Price: 0.40 (0.48 Including VAT at 20%)




People who bought this item also bought:
1. Locker for Stub Axle (Ref: 277311D)
2. Inner Wheel Hub Seal (Ref: RTC3510)
3. Locker for Hub Nuts (Ref: 217353=)
Felt Seal Stub Shaft to Drive Flange
Inner Wheel Hub Seal Ref: RTC3510
Application: Series 1 front axles, Series 2 & Series 3 to 1980.
Description: Inner hub oil seal made by Corteco/Gaco.
Approximate dimensions: outside diameter 85mm (3.35"), thickness 7.8mm (0.3").
Original part number 239422.

Price: 3.57 (4.28 Including VAT at 20%)




People who bought this item also bought:
1. Locker for Hub Nuts (Ref: 217353=)
2. Flange Gasket (Ref: 231505=)
3. Felt Seal Stub Shaft to Drive Flange (Ref: RTC3515)
Inner Wheel Hub Seal
Inner Hub Bearing NTN Ref: RTC3416N
Application: Series 1 front hubs, Series 2 & 2A front and rear hubs, Series 3 front and rear hubs to 1980.
Description: Inner wheel hub bearing. NTN (Japanese) taper roller bearing 359S/354X.
Approximate dimensions: outside diameter 85mm (3.35"), inside diameter 46mm (1.8").
Original part number 217269

Price: 18.59 (22.31 Including VAT at 20%)



Inner Hub Bearing NTN
Outer Hub Bearing NTN Ref: RTC3426N
Application: Series 1 front hubs, Series 2 & 2A front and rear hubs, Series 3 front and rear hubs to 1980.
Description: Outer wheel hub bearing. NTN (Japanese) taper roller bearing 11162/11300.
Approximate dimensions: outside diameter 76.5mm (3.0"), inside diameter 41.2mm (1.62").
Original part number 217270

Price: 10.80 (12.96 Including VAT at 20%)



Outer Hub Bearing NTN
Locker for Hub Nuts Ref: 217353=
Application: Series 1, 2 & 3. Range Rover Classic and early Defender.
Description: Locker for wheel hub nuts.
Approximate dimensions: outside diameter 64.5mm (2.54"), inside diameter 41.6mm (1.64"), thickness 1.0mm *(0.040")

Price: 0.45 (0.54 Including VAT at 20%)




People who bought this item also bought:
1. Felt Seal Stub Shaft to Drive Flange (Ref: RTC3515)
2. Inner Wheel Hub Seal (Ref: RTC3510)
3. Flange Gasket (Ref: 231505=)
Locker for Hub Nuts
Digital Dispensary > REGULAR Service and Repair Parts > Driveline > Hubs, bearing kits and so forth
Page:  1  2   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Steering Arm - Series 1

Steering Arm - Series 1

17.82

Application: Series 1 models 1948 to 1956 approx.

Description: Drop arm for early type steering box. This arm is held in place with a pinch bolt.

Approximate dimensions: Overall length 17.4cm(6.9")

find out more

'D' Washer - Pedal Shaft

'D' Washer - Pedal Shaft

0.96

Application: Series 1 models.

Description: 'D' washer for support shaft for brake and clutch pedals.

Approximate dimensions: Outside diameter 38mm(1.5"), thickness 3mm(1/8").


find out more

Fixing Kit for Manifolds - Metric

Fixing Kit for Manifolds - Metric

12.83

Application: Series 3 from 1980 with 2.25 litre petrol engine.

Description: Metric threaded kit of fixings to hold manifolds to cylinder head. Kit includes 6 bolts, 2 set screws, 3 studs, 9 plain washers, 11 lock washers, 3 nuts, 2 clamps and 2 lockers

find out more

Fixing Kit for Manifolds - Imperial

Fixing Kit for Manifolds - Imperial

10.20

Application: Series 2 and Series 3 to approx 1980 with 2.25 litre petrol engine.

Description: Imperial (inch) threaded kit of fixings to hold manifolds to cylinder head. Kit includes 6 bolts, 2 set screws, 3 studs, 9 plain washers, 11 lock washers, 3 nuts, 2 clamps and 2 lockers

find out more

Shackle Plate Rear

Shackle Plate Rear

11.16

Application: Series1 1948 to 1953.

Description: Shackle plate for rear springs with plain 9/16" diameter holes.

Approximate dimensions: Length 113mm(4.45"), width 38mm(1.5"), thickness 9.2mm(0.36")
find out more

Shackle Plate Rear

Shackle Plate Rear

13.02

Application: Series 1 1948 to 1953.

Description: Shackle plate for rear springs with 1/2"BSF threaded holes.

Approximate dimensions: Length 113mm(4.45"), width 38mm(1.5"), thickness 9.2mm(0.36")

find out more

Clip for 3/16" Brake Pipe

Clip for 3/16

1.39

Application: Series1, Series2/2A and Series3 models.

Description: Reproduction stainless steel clip for brake pipes. Intended for 3/16" pipe, but will work with 1/4" diameter pipe also.

Approximate dimensions: Length 20mm(0.8"), width 10mm(3/8"), height 5mm(0.2"), hole diameter 4mm(0.16").

find out more

Rear End-plate for Cylinder Head

Rear End-plate for Cylinder Head

97.66

Application: Series 1 petrol models 1948 to 1958, Series 2 models with 2 litre petrol engine.

Description: Reproduction end plate in cast aluminium with mounting aperature for thermo switch.

Approximate dimensions: Length 91mm(3.6"), height 84mm(3.3"), depth 18.4mm(0.72")

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -