Digital Dispensary

Product Sections


Best Sellers

Clip for brake pipe grommet

Clip for brake pipe grommet

0.61

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Clip for brake pipe support grommet 6860L. Used on rear axle casing on all Series models from 1954 to 1984.
Approximate dimensions: 11mm(7/16") wide, 34mm(1.3") long, mounting hole 5mm(0.2") diameter, internal diameter of clip when closed 13mm.
find out more

Grommet - Brake Pipe Support

Grommet - Brake Pipe Support

0.31

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Grommet to support brake pipe on rear axle casing. Used with clip 56666.
Approximate dimensions: overall length 21.5mm(0.85"), inside diameter 7mm(0.3"), outside diameter 14.5mm(0.6")
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Copper Ring Water Pump to Thermostat Housing

Copper Ring Water Pump to Thermostat Housing

7.44

Application: Series One with 1.6 or 2 litre petrol engine. Series Two with 2 litre petrol engine.
Description: Copper ring to support 'O' ring between water pump and thermostat housing.
Approximate dimensions: outside diameter 16mm(0.63"), inside diameter 11mm(0.43"), height 7.5mm(0.3")
find out more

Replacement Universal Joint Kit

Replacement Universal Joint Kit

11.93

Application: Series 1 and Series 2/2A to approximately 1964.
Description: Universal joint repair kit including 4 circlips and a grease nipple.
Approximate Dimensions: Distance across faces of joint 75mm (2.95"), cap diameter 27mm (1.06"), cap length including seal 17mm ( 0.67").
Original part number 43023.
find out more

Dust Cap for Bleed Screw

Dust Cap for Bleed Screw

0.30

Application: Suitable for all bleed screws.
Description: Soft plastic dust cap for bleed screws.
Approximate dimensions: length 15mm(0.6"), diameter 8mm (0.3")
Original part number 234957
find out more

Lockheed Delphi Wheel Cylinder S1, S2a & S3

Lockheed Delphi Wheel Cylinder S1, S2a & S3

18.00

Application: Front right hand cylinder on SWB models to 1980, rear RH wheel cylinder on SWB models fron 1980 onwards. Rear RH wheel cylinder on all 109 models.
Description: Brake wheel cylinder for use with 10 inch brake drums. Bore diameter 1.25".
Approximate dimensions: Length 83mm (3.3"), bore diameter 31.8mm (1.25"), mounting stud centres 42mm (1.65").
find out more

Reservoir for S1 Brakes

Reservoir for S1 Brakes

38.88

Application: Series One 1948 to 1958.

Description: Reproduction steel brake fluid reservoir supplied with steel cap.

Approximate dimensions: Overall length 145mm(5.7"), overall diameter 68.5mm(2.7")

Back in stock.
find out more

Lockheed Delphi Wheel Cylinder S1, S2A & S3

Lockheed Delphi Wheel Cylinder S1, S2A & S3

18.00

Application: 88 inch wheel base rear right hand to 1980. Used in 10 inch drums.

Description: Cast iron wheel cylinder by Lockheed Delphi. Internal bore 25mm (1 inch), length 84mm (3.3 ionches). NB on early vehicles this cylinder was used on the left hand rear drum.

find out more

These Superb Prices are ONLY available when you order ON-LINE

Page:  1  2   >   >>
Replacement Equivalent to 90606262 Ref: 90606262
Application: All those vehicles fitted with Facet electric fuel pump, Range Rover Classic 1975 to 1985, S3 109V8, S3 6cyl petrol, Defender 2.5 petrol, Defender V8 and possibly some others.

Price: 12.00 (14.40 Including VAT at 20%)



Replacement Equivalent to 90606262
Replacement Equivalent to JS660L Ref: JS660L
Mann petrol fuel filter element P65/1 (Alternative manufacturer may be supplied depending on availability)

Application:
Series 3 109 V8
Defender 2.5 and 3.5 (carb type) petrol.
Discovery I 3.5 V8 carb type.
Range Rover Classic 3.5 V8 carb type.

Approx dimensions: 56mm dia x 38mm long.

Price: 2.96 (3.55 Including VAT at 20%)



Replacement Equivalent to JS660L
Genuine Diesel Fuel Filter Element - 90517711 Ref: 90517711
Genuine diesel fuel filter element with 4 'O' ring seals.

Application:
Series 2A & 3 2.25 diesel.
Defender (inc Ninety & One Ten) 2.25 diesel, 2.5 diesel and 2.5 diesel turbo.

Approx dimensions 83mm diameter x 71mm long.

Old part number: RTC6079

Price: 4.83 (5.80 Including VAT at 20%)



Genuine Diesel Fuel Filter Element - 90517711
Replacement Equivalent to 90517711 Ref: RTC6079D
Crosland diesel fuel filter element with 5 'O' ring seals - 522. (Coopers or Fram may be supplied depending on availability).
Application:
Series 2A & 3 2.25 diesel.
Defender (inc Ninety & One Ten) 2.25 diesel, 2.5 diesel and 2.5 diesel turbo.
Approx dimensions 83mm diameter x 71mm long.

Price: 1.80 (2.16 Including VAT at 20%)



Replacement Equivalent to 90517711
Genuine Diesel Fuel Filter Element - AEU2147L Ref: AEU2147L
Genuine diesel fuel filter element.

Application:
Defender 200TDi and 300TDi.
Discovery I 200TDi and 300TDi.
Range Rover Classic 2.4VM, 2.5VM, 200TDi and 300TDi.

Approx dimensions: 82mm dia x 140mm long.

Price: 10.80 (12.96 Including VAT at 20%)



Genuine Diesel Fuel Filter Element - AEU2147L
Replacement alternative to AEU2147L Ref: AEU2147LD
Coopers diesel fuel filter element AZF090 (Mann, Fram or equivalent may be supplied depending on availability)

Application:
Defender 200TDi and 300TDi.
Discovery I 200TDi and 300TDi.
Range Rover Classic 2.4VM, 2.5VM, 200TDi and 300TDi.

Approx dimensions: 82mm dia x 140mm long.

Price: 5.52 (6.62 Including VAT at 20%)



Replacement alternative to  AEU2147L
Genuine Diesel Fuel Filter Element - ESR4686 Ref: ESR4686
Genuine diesel fuel filter element.

Application:
Defender TD5.
Discovery 2 TD5.

Approx dimensions: 84mm dia x 135mm long.

Price: 37.24 (44.69 Including VAT at 20%)



Genuine Diesel Fuel Filter Element - ESR4686
Replacement Equivalent to ESR4686 Ref: ESR4686D
Coopers diesel fuel filter element FSM4142 ( Mann, Fram or equivalent may be supplied depending on availability).

Application:
Defender TD5.
Discovery 2 TD5.

Approx dimensions: 84mm dia x 135mm long.

Price: 10.00 (12.00 Including VAT at 20%)



Replacement Equivalent to ESR4686
Replacement Petrol Filter equivalent to NTC5958 Ref: NTC5958D
Lucas petrol fuel filter FDB101, this is the 'push on' type. (Equivalent filter may be supplied depending on availability)

Application:
Range Rover Classic Efi 1986 to 1990 (to Chassis number GA464553).

Approx dimensions: 80mm dia x 140mm long inc connectors.

Price: 9.50 (11.40 Including VAT at 20%)



Replacement Petrol Filter equivalent to NTC5958
Genuine Petrol Filter Canister ESR4065 Ref: ESR4065
Genuine petrol fuel filter canister, this is the 'screw on' type.

Application:
Range Rover Classic Efi 1990 to 1994 (Chassis number HA464554 to LA647644).

Approx dimensions: 53mm dia x 105mm long inc connectors.

Price: 10.64 (12.77 Including VAT at 20%)



Genuine Petrol Filter Canister ESR4065
Page:  1  2   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Alignment Pins

Alignment Pins

53.27

Application: Freelander 2 and Evoque.

Description: Pair of pins for aligning front subrame to bodyshell.

Approximate dimensions: Overall length 168mm(6.6"), pin diameter 20mm(0.8")

find out more

Rear Lens Right Hand

Rear Lens Right Hand

47.04

Application: Range Rover Classic.

Description: Reproduction rear lamp lens with fog guard.

Approximate dimensions: Height 22.8cm(9"), width 14.3cm(5.6"), thickness 1.8cm(0.7")

find out more

Clamp for Disributor

Clamp for Disributor

18.60

Application: Series 1, Series 2 and Series 3 petrol models.

Description: Clamp for retaining distributor.

Approximate dimensions: Internal diameter 36mm(1.4"), thickness 3mm(0.12")

find out more

6 Way Junction Box

6 Way Junction Box

22.80

Application: All Series 1 models.

Description: Reproduction 6 way junction box.

Approximate dimensions: Overal diameter 54mm(2.1"), height 37.5mm(1.5")

find out more

Fuse Box Series 1

Fuse Box Series 1

34.54

Application: All Series 1 models.

Description: Reproduction 1 way fuse box, needs glass fuse.

Approximate dimensions: Length 54mm(2.1"), width 33mm(1.3"), height 45mm(1.9")

find out more

TDC Alignment Plate

TDC Alignment Plate

120.43

Application: 2.0 I4 MID DOHC AJ200 engine as used in Evoque and Freelander 2.

Description: Alignment plate for setting Top Dead Centre for this engine.

Approximate dimensions: 25cm(9.8"), x 20cm(7.9") x 0.8cm(0.31")

find out more

Thrust Bearing Assembly

Thrust Bearing Assembly

27.90

Application: Fairey overdrive for LT76 gearbox.

Description: Thrust bearing assembly for input shaft. Chamfered plate to clear radius on shaft step.

Approximate dimensions: Overall diameter 1-7/8"(47.6mm), inside diameter 30.8mm(1.21"), thickness of assembly 6mm(0.24")

find out more

Aligner for Balance Shaft

Aligner for Balance Shaft

78.14

Application: 2.0 I4 MID DOHC AJ200 engine as used in Evoque and Freelander 2.

Description: ool for aligning the balance shaft of this engine.

Approximate dimensions: Overall length 84mm(3.3"), flange diameter 70mm(2.75"), body diameter 44mm(1.73").

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -