Digital Dispensary

Product Sections


Best Sellers

Brass Nut 5/16"BSF

Brass Nut 5/16

1.66

Application: Series1 exhaust manifold.

Description: Brass nut 5/16"BSF for holding downpipe to exhaust manifold.

Approximate dimensions: 3/8"(9.5mm) high, 17/32"(13.5mm) across flats.

find out more

Grommet - Brake Pipe Support

Grommet - Brake Pipe Support

0.31

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Grommet to support brake pipe on rear axle casing. Used with clip 56666.
Approximate dimensions: overall length 21.5mm(0.85"), inside diameter 7mm(0.3"), outside diameter 14.5mm(0.6")
find out more

Clip for brake pipe grommet

Clip for brake pipe grommet

0.61

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Clip for brake pipe support grommet 6860L. Used on rear axle casing on all Series models from 1954 to 1984.
Approximate dimensions: 11mm(7/16") wide, 34mm(1.3") long, mounting hole 5mm(0.2") diameter, internal diameter of clip when closed 13mm.
find out more

Ignition Coil

Ignition Coil

30.11

Application: Series 1 and Series 2.
Description: Reproduction ignition coil with screw in high tension connection. Supplied with acorn nut and split washer.
Approximate dimensions: Body diameter 54.8mm(2.2"), height 15cm(5.9")
find out more

Stud for Exhaust Manifold

Stud for Exhaust Manifold

1.85

Application: Series 1 1.6 and 2.0 litre, Series 2 2 litre.

Description: Stud to hold downpipe to exhaust manifold.

Approximate dimesions: 5/16"BSF threads to both ends, overall length 1.25"(32mm)

find out more

Black High Tension Lead, Copper Cored

Black High Tension Lead, Copper Cored

1.86

Application: Series One and Series Two
Description: Black high tension cable for spark plugs. 7mm(0.28") outside diameter with 19 strand copper core.

Sold by the metre
find out more

Rocker Cover Gasket

Rocker Cover Gasket

7.72

Application: 1.6ltr and 2.0ltr petrol (gasolene) engines.

Description: Gasket for rocker cover to cylinder head.
find out more

Gasket Exhaust Manifold to Down Pipe

Gasket Exhaust Manifold to Down Pipe

0.96

Application: Series 1, 2 & 3 four cylinder engines.
Description: Square flange gasket for exhaust. Used on various exhaust manifolds and on some pipe to pipe exhaust joints.
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

These Superb Prices are ONLY available when you order ON-LINE

Page:   <<   <  1  2  3  4  5
Holding Tool for Water Pump Ref: LRT-12-215
Application: Range Rover Generation 3 with 4.4 litre petrol (gasolene) engine.

Description: Tool for holding water pump to remove the viscous unit. Used with LRT-12-214

Approximate dimensions: Overall length 60cm.

New tool number: 303-1004

Price: 68.76 (82.51 Including VAT at 20%)





Related products:
1. Wrench for Viscous Fan - Range Rover 3 (Ref: LRT-12-214)
Holding Tool for Water Pump
Pair of Locking Tools for Timing Chain Tensioners Ref: LRT-12-220
Application: Range Rover 3rd generation fitted with 4.4 litre petrol (gasolene) V8 engine.

Description: Pair of tools for locking timing chain tensioners.

New tool part number: 303-1009

Price: 16.67 (20.00 Including VAT at 20%)



Pair of Locking Tools for Timing Chain Tensioners
Camshaft Adjustment Tool Ref: LRT-12-221
Application: Range Rover 3rd generation fitted with 4.4 litre petrol (gasolene) V8 engine.

Description: Camshaft adjustment tool used in conjunction with LRT-12-222.

New tool part number: 303-1010

Price: 58.79 (70.55 Including VAT at 20%)





Related products:
1. Adjusting Bolt Camshaft Tensioner (Ref: LRT-12-222)
Camshaft Adjustment Tool
Adjusting Bolt Camshaft Tensioner Ref: LRT-12-222
Application: Range Rover 3rd generation fitted with 4.4 litre petrol (gasolene) V8 engine.

Description: Adjusting bolt for adjustment of camshaft timing chain. Used in conjunction with LRT-12-221.

New tool part number: 303-1011

Price: 31.45 (37.74 Including VAT at 20%)





Related products:
1. Camshaft Adjustment Tool (Ref: LRT-12-221)
Adjusting Bolt Camshaft Tensioner
Camshaft Locking Tools Ref: LRT-12-223
Application: Range Rover 3rd generation fitted with 4.4 litre petrol (gasolene) V8 engine.
Description: Boxed saet of tools for locking camshafts in position whilst timing the engine.
New tool part number: 303-1012

Price: 409.49 (491.39 Including VAT at 20%)



Camshaft Locking Tools
Socket VCT Unit Adjstment Ref: LRT-12-224
Application: Range Rover 3rd generation fitted with 4.4 litre petrol (gasolene) V8 engine.
Description: Socket for adjusting the variable cam timing unit.
New tool number: 303-1013
Overall diameter: 40mm (1.57")

Price: 53.14 (63.77 Including VAT at 20%)



Socket VCT Unit Adjstment
Timing Tool V8 Ref: LRT-12-227
Application: Range Rover 3 (L322) 2002 onwards with 4.4 litre V8 petrol.
Description: Engine timing setting tool. Overall length 73mm (2.9")
New tool number: 303-1016

Price: 58.33 (70.00 Including VAT at 20%)



Timing Tool V8
Timing Tool Ref: LRT-12-228
Application: Range Rover 3rd generation fitted with 4.4 litre petrol (gasolene) V8 engine.
Description: Pair of brackets and clamps to adjust timing of the CMP sensor ring.
New tool part number: 303-1017

Price: 219.80 (263.76 Including VAT at 20%)



Timing Tool
Holding Tool Crankshaft Ref: LRT-12-229
Application: Range Rover 3 (L322) 2002 onwards with V8 petrol engine.
Description: Crankshaft holding tool for removal of crankshaft nose bolt. Overall length 51cm (20")
Alternative tool number: 303-1018

Price: 81.77 (98.12 Including VAT at 20%)



Holding Tool Crankshaft
Distance Piece for Valve Guides Ref: LRT-12-515
Application: V8 to 1994, 4 cylinder Series engines, 200TDi and 300TDi.
Description: Height guage for fitting of valve guides, used with LRT-12-046.
Approximate dimensions: Height 19mm (0.75"), internal diameter 15.5mm (0.61"), outside diameter 31.5mm (1.24").
Old tool number: RO605774A

Price: 23.23 (27.88 Including VAT at 20%)





Related products:
1. Drift Valve Stem Guide (Ref: LRT-12-046)
Distance Piece for Valve Guides
Page:   <<   <  1  2  3  4  5

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Lever Arm for 4WD Select

Lever Arm for 4WD Select

15.80

Application: Series 1 to 1955.

Description: Lever arm with bronze bush to middle hole for selection of four wheel drive in high ratio.

Approximate dimensions: Overall length 116mm(4.6"), width 15.5mm(0.61"), thickness 6mm(0.24"), distance from centre of bushed hole to centre of slotted hole 36mm(1.42"), distance from centre of bushed hole to other hole is 68mm(2.67")

find out more

Olive for Vacuum Pipe

Olive for Vacuum Pipe

0.84

Application: Series 1 and Series2 with Solex 32PBI carburettor.

Description: Brass olive for use with 1/8" copper pipe.

Approximate dimensions: Length 4.7mm(0.19"), outside diameter 4.7mm(0.19"), internal dimater 1/8"(3.2mm).

find out more

Male Union for Vacuum Pipe

Male Union for Vacuum Pipe

2.40

Application: Series 1 and Series 2A.

Description: Brass male union for 1/8" copper pipe. Threaded to fit Solex 32PBI.

Aproximate dimensions: Length 10mm(0.39"), internal diameter 1/8"(3.2mm), hex 9mm(0.35") across flats, thread 1/4"BSF.

find out more

Grommet for vacuum pipe

Grommet for vacuum pipe

3.83

Application: Series 1 and Series 2A.

Description: Split rubber grommet for us with 214228 retaining clip. Used on 1/8" diameter copper vacuum pipe.

Approximate dimensions: Length 17mm(0.67"), internal diameter 3mm(1/8"), overall diameter 9mm(0.35")

find out more

Retaining Clip for Vacuum Pipe

Retaining Clip for Vacuum Pipe

2.78

Application: Series 1 and Series 2A.

Description: Retaining clip for copper vacuum pipe for advance and retard.

Approximate dimensions: 41.5mm(1.6") x 13mm(0.5") x 9mm(0.35"). Mounting hole 7mm(0.28")

find out more

Installer Oil Seal

Installer Oil Seal

33.79

Application: Evoque and Freelander 2.

Description: Installer for bellhousing differential oil seal. Use with 307-520.

Approximate dimensions: Overall diameter 80mm(3.15"), inside diameter 54mm(2.13"), height 48.5mm(1.9").

find out more

Installer Oilseal

Installer Oilseal

155.89

Application: Evoque and Freelander 2.

Description: Installer for quillshaft oil seal. Use with 307-520.

Approximate dimensions: Overall diameter 80mm(3.15"), height 64mm(2.52").


find out more

Pinion Bearing for Salisbury Differential

Pinion Bearing for Salisbury Differential

12.37

Application: Series 3 Long Wheel Base and Defender 110 models with rear Salisbury axle.

Descrtiption: Timken/Japanese sourced outer pinion taper roller bearing for Salisbury differentials.

Approximate dimensions: Outside diameter 2.85"(72.3mm), inside diameter 1 3/8"(34.9mm), depth 26.7mm(1.05")

Bearing numbers: HM88649/ HM88610

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -