Digital Dispensary

Product Sections


Best Sellers

Brass Nut 5/16"BSF

Brass Nut 5/16

1.66

Application: Series1 exhaust manifold.

Description: Brass nut 5/16"BSF for holding downpipe to exhaust manifold.

Approximate dimensions: 3/8"(9.5mm) high, 17/32"(13.5mm) across flats.

find out more

Grommet - Brake Pipe Support

Grommet - Brake Pipe Support

0.31

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Grommet to support brake pipe on rear axle casing. Used with clip 56666.
Approximate dimensions: overall length 21.5mm(0.85"), inside diameter 7mm(0.3"), outside diameter 14.5mm(0.6")
find out more

Clip for brake pipe grommet

Clip for brake pipe grommet

0.61

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Clip for brake pipe support grommet 6860L. Used on rear axle casing on all Series models from 1954 to 1984.
Approximate dimensions: 11mm(7/16") wide, 34mm(1.3") long, mounting hole 5mm(0.2") diameter, internal diameter of clip when closed 13mm.
find out more

Ignition Coil

Ignition Coil

30.11

Application: Series 1 and Series 2.
Description: Reproduction ignition coil with screw in high tension connection. Supplied with acorn nut and split washer.
Approximate dimensions: Body diameter 54.8mm(2.2"), height 15cm(5.9")
find out more

Stud for Exhaust Manifold

Stud for Exhaust Manifold

1.85

Application: Series 1 1.6 and 2.0 litre, Series 2 2 litre.

Description: Stud to hold downpipe to exhaust manifold.

Approximate dimesions: 5/16"BSF threads to both ends, overall length 1.25"(32mm)

find out more

Black High Tension Lead, Copper Cored

Black High Tension Lead, Copper Cored

1.86

Application: Series One and Series Two
Description: Black high tension cable for spark plugs. 7mm(0.28") outside diameter with 19 strand copper core.

Sold by the metre
find out more

Rocker Cover Gasket

Rocker Cover Gasket

7.72

Application: 1.6ltr and 2.0ltr petrol (gasolene) engines.

Description: Gasket for rocker cover to cylinder head.
find out more

Gasket Exhaust Manifold to Down Pipe

Gasket Exhaust Manifold to Down Pipe

0.96

Application: Series 1, 2 & 3 four cylinder engines.
Description: Square flange gasket for exhaust. Used on various exhaust manifolds and on some pipe to pipe exhaust joints.
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

These Superb Prices are ONLY available when you order ON-LINE

Page:  1  2  3  4  5   >   >>
Spider Bypass Link Cable Ref: AMR4956
Application: Discovery 1 1995 to 1998 approx, where fitted with original immobilisation and alarm system.
Description: Small wiring harness to bypass the "spider" .
See http://forums.lr4x4.com/index.php?showtopic=86 for full instructions on how to fit.

Price: 9.66 (11.59 Including VAT at 20%)



Spider Bypass Link Cable
Connector Kit for Defender Switches Ref: ZZPLUG01
Application: Defender 2001 to 2006 with the facelift dash.
Description: Connector kit for auxillary switches on centre dash. This is a direct fit to the front fog lamp switch YUG000540LNF, but will fit the other switches if the splines are removed with a small sharp blade such as a modelling scalpel.

Price: 4.80 (5.76 Including VAT at 20%)



Connector Kit for Defender Switches
Front Fog Lamp Switch Ref: YUG000540LNF
Application: Defender 2002 onwards.
Description: Front fog lamp switch for facelift dash on Defenders 2002 onwards. Can also be used for auxillary lamps. Connector kit ZZPLUG01 fits this switch.
Approximate dimensions: overall length 66mm (2.6"), fits aperature 26.5mm(1.04") by 16mm (0.625")

Price: 49.64 (59.57 Including VAT at 20%)



Front Fog Lamp Switch
Connector Kit for Defender Switches Ref: ZZPLUG02
Application: Defender 2001 to 2006 with the facelift dash.
Description: Connector kit for auxillary switches on centre dash. This is a direct fit to the rear wiper switch YUG000350LNF, but will fit the other switches if the splines are removed with a small sharp blade such as a modelling scalpel.

Price: 7.49 (8.99 Including VAT at 20%)



Connector Kit for Defender Switches
Switch for Heated Seat - Defender Ref: YUG102430
Application: Defender 2002 onwards.
Description: push on/push off switch for heated seat. ZZPLUG01 or ZZPLUG02 will connect to this if fine splines are trimmed with sharp blade.

Price: 36.93 (44.32 Including VAT at 20%)



Switch for Heated Seat - Defender
Push/Pull Switch with Illuminated Knob Ref: PRC3289
Application: Range Rover Classic, universal.
Description: High quality push/pull switch by Durite with illuminate knob when on. Original fitment as heated rear window switch on Classic Range Rover 1972 to 1980 approx. However also applicable as auxilliary equipment control switch. Centre of knob glows red when switched on.

Price: 12.50 (15.00 Including VAT at 20%)




People who bought this item also bought:
1. Horn High Note (Ref: YEB10026)
2. Door Mirror Left Hand (Ref: RTC2191)
3. Door Mirror Right Hand (Ref: RTC2190)
Push/Pull Switch with Illuminated Knob
Dip Switch Ref: 541602
Application: Series 2 1961 to 1963.

Description: Reproduction floor mounted dip switch for headlamps. Switch has 3 screw terminals marked 56a, 56 and 56b.

Approximate dimensions: Height 6cm(2.36"), width 5.5cm(2.17"), length 4.5cm(1.77").

Price: 14.50 (17.40 Including VAT at 20%)



Dip Switch
6 Way Lighting Switch - Military Ref: PRC2088
Application: Series3, Light Weight, 101 and Defender military models.

Description: Old stock Lucas 34259 six way lighting swith with facility for lock barrel (not supplied).


Price: 128.00 (153.60 Including VAT at 20%)



6 Way Lighting Switch - Military
Solenoid Switch for Starter Ref: 13H5952LD
Application: Series 2A and Series 3 petrol models (not V*).

Description: Lucas SRB325 starter solenoid switch.

Approximate dimensions: Height 76mm(3"), width 55mm(2.2"), depth 63mm(2.5").

Price: 12.07 (14.48 Including VAT at 20%)




People who bought this item also bought:
1. Steering Box Repair Kit (Ref: STRGBOXKIT01)
2. Bearing Top of Steering Column (Ref: RTC324)
3. Locker for Nut to Steering column S3 (Ref: NRC5385)
Solenoid Switch for Starter
Connector Kit for Bulb Holders Ref: ZZLRA102
Application: Single pole bulb holders on Defender 1995 onwards, Discovery 1, Discovery 2, Range Rover Classic late,and Range Rover 38A 1995 to 2001.
Description: Connection kit for replacing plug that connects to single pole bulb holder XPB100180.

Price: 3.67 (4.40 Including VAT at 20%)




People who bought this item also bought:
1. Bulb Holder Single Pole (Ref: XBP100180)
Connector Kit for Bulb Holders
Page:  1  2  3  4  5   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Lever Arm for 4WD Select

Lever Arm for 4WD Select

15.80

Application: Series 1 to 1955.

Description: Lever arm with bronze bush to middle hole for selection of four wheel drive in high ratio.

Approximate dimensions: Overall length 116mm(4.6"), width 15.5mm(0.61"), thickness 6mm(0.24"), distance from centre of bushed hole to centre of slotted hole 36mm(1.42"), distance from centre of bushed hole to other hole is 68mm(2.67")

find out more

Olive for Vacuum Pipe

Olive for Vacuum Pipe

0.84

Application: Series 1 and Series2 with Solex 32PBI carburettor.

Description: Brass olive for use with 1/8" copper pipe.

Approximate dimensions: Length 4.7mm(0.19"), outside diameter 4.7mm(0.19"), internal dimater 1/8"(3.2mm).

find out more

Male Union for Vacuum Pipe

Male Union for Vacuum Pipe

2.40

Application: Series 1 and Series 2A.

Description: Brass male union for 1/8" copper pipe. Threaded to fit Solex 32PBI.

Aproximate dimensions: Length 10mm(0.39"), internal diameter 1/8"(3.2mm), hex 9mm(0.35") across flats, thread 1/4"BSF.

find out more

Grommet for vacuum pipe

Grommet for vacuum pipe

3.83

Application: Series 1 and Series 2A.

Description: Split rubber grommet for us with 214228 retaining clip. Used on 1/8" diameter copper vacuum pipe.

Approximate dimensions: Length 17mm(0.67"), internal diameter 3mm(1/8"), overall diameter 9mm(0.35")

find out more

Retaining Clip for Vacuum Pipe

Retaining Clip for Vacuum Pipe

2.78

Application: Series 1 and Series 2A.

Description: Retaining clip for copper vacuum pipe for advance and retard.

Approximate dimensions: 41.5mm(1.6") x 13mm(0.5") x 9mm(0.35"). Mounting hole 7mm(0.28")

find out more

Installer Oil Seal

Installer Oil Seal

33.79

Application: Evoque and Freelander 2.

Description: Installer for bellhousing differential oil seal. Use with 307-520.

Approximate dimensions: Overall diameter 80mm(3.15"), inside diameter 54mm(2.13"), height 48.5mm(1.9").

find out more

Installer Oilseal

Installer Oilseal

155.89

Application: Evoque and Freelander 2.

Description: Installer for quillshaft oil seal. Use with 307-520.

Approximate dimensions: Overall diameter 80mm(3.15"), height 64mm(2.52").


find out more

Pinion Bearing for Salisbury Differential

Pinion Bearing for Salisbury Differential

12.37

Application: Series 3 Long Wheel Base and Defender 110 models with rear Salisbury axle.

Descrtiption: Timken/Japanese sourced outer pinion taper roller bearing for Salisbury differentials.

Approximate dimensions: Outside diameter 2.85"(72.3mm), inside diameter 1 3/8"(34.9mm), depth 26.7mm(1.05")

Bearing numbers: HM88649/ HM88610

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -