Digital Dispensary

Product Sections


Best Sellers

Black High Tension Lead, Copper Cored

Black High Tension Lead, Copper Cored

1.86

Application: Series One and Series Two
Description: Black high tension cable for spark plugs. 7mm(0.28") outside diameter with 19 strand copper core.

Sold by the metre
find out more

Spark Plug Champion N5C

Spark Plug Champion N5C

2.00

Application: Series 2A and Series 3 4 cylinder engines with 7:1 compression ratio and all 6 cylinder Series engines. Also applicable to Series 1 engines.
Description: Champion N5C spark plug, original equipment.
Supersession of Series 1 part number 262796.
find out more

Gaiter for Main Gear Lever

Gaiter for Main Gear Lever

2.16

Application: Series 1, Series 2, Series 2A and Series 3 4 & 6 cylinder models.

Description: Reproduction rubber gaiter for main gear lever.

Approximare dimensions: 11.5cm(4.5") square, 3.6cm(1.4") high.

find out more

Contact Breakers Lucas 25D

Contact Breakers Lucas 25D

3.00

Application: Lucas 25D 4cylinder distributor as fitted to Series 2A and early Series 3 petrol engines, also used on late Series 1 engines with the DM2 distributor.

Description: Lucas boxed contact breaker set also known as 'points'.

Original part number 269987.

find out more

Replacement Condensor for Lucas 25D

Replacement Condensor for Lucas 25D

2.68

Application: Lucas 25D 4cylinder distributor as fitted to Series 2A and early Series 3 petrol engines.Also used on late Series 1 engines.

Description: No longer Lucas boxed condensor as the Lucas ones have a different connector on lead now that makes fixing ackward. So now sourcing from good after market source to original style of Lucas unit!

Approximate dimensions: overall diameter 17mm (0.67 inches), lead 57mm (2.24 inches).

Original part numbers 269988, 245007. DCB101, GSC101

find out more

Pack of 10 7/16" BSF Plain Nuts

Pack of 10 7/16

1.92

Pack of ten 7/16" BSF plain nuts, 45/64"(17.8mm) across flats, 3/8"(9.3mm) high.
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Brass Nut 5/16"BSF

Brass Nut 5/16

1.66

Application: Series1 exhaust manifold.

Description: Brass nut 5/16"BSF for holding downpipe to exhaust manifold.

Approximate dimensions: 3/8"(9.5mm) high, 17/32"(13.5mm) across flats.

find out more

Gaiter for Handbrake Lever

Gaiter for Handbrake Lever

2.70

Application: Late Series 2A and Series 3.

Description: Reproduction rubber gaiter for handbrake lever. This is for the later style lever that curves upwards to nearly vertical.

Approximate dimensions: Height 168mm(6.6"), depth 110mm(4.3")

find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > DISCOVERY 1 parts > Discovery 1 Steering System
Steering Box Right Hand Drive Ref: QAF500110
Application: Defender when fitted with '4 bolt' bolt steering box. Discovery 1 and Range Rover Classic. This box is supplied without a drop arm.
Description: Brand new 'Adwest' 4 bolt steering box. (The 4 bolts refer to the number of bolts holding top cover onto box, not the number of mounting bolts.)

Price: 457.19 (548.63 Including VAT at 20%)



Steering Box Right Hand Drive
Drop Arm RHD Adwest Ref: QFW000020
Application: Range Rover Classic, Defender and Discovery1 to 1993 approx.

Description: Genuine Adwest drop arm with ball joint (but not nut, washer or split pin) for Adwest right hand drive steering boxes. Suitable for both the Adwest heavy weight box (with 3 bolts holding top of steering box) and the Adwest light weight box (with 4 bolts holding top of steerng box).

Price: 79.20 (95.04 Including VAT at 20%)



Drop Arm RHD Adwest
Drop Arm Ball Joint Repair Kit Ref: RBG000010G
Application: Range Rover Classic, Defender and Discovery 1 to 1993 approx.
Description: Genuine Adwest drop arm ball joint rebuild kit. Suitable for both Adwest and Gemmer drop arms.

Price: 24.19 (29.03 Including VAT at 20%)



Drop Arm Ball Joint Repair Kit
Steering Damper Ref: STC786D
Application: Series 2A, Series 3, Range Rover Classic and Discovery 1.

Description: Steering damper by Armstrong or similar branded supplier. Supplied with fitting kit.

Approximate dimensions: Overall length open 63.5cm(25"), overall length closed 42.5cm(16.7").

Price: 13.86 (16.63 Including VAT at 20%)




People who bought this item also bought:
1. Pair of Hand Brake Shoes (Ref: STC3821)
2. Pair of Replacement Brake Hoses Series 3 (Ref: RTC5903DKIT)
3. Steering Ball Joint Series 3 - LH thread (Ref: RTC5868=)
Steering Damper
Fixings Kit for Steering Damper Ref: STC786FIX
Application: Series 2A, Series 3, Range Rover Classic and Discovery 1.

Description: Kit of fixings including 2 3/8UNF nyloc nuts, 8 cup washers and 4 bushes.

Price: 13.02 (15.62 Including VAT at 20%)



Fixings Kit for Steering Damper
Track Rod End - RH Thread Ref: RTC5869=
Application: Defender, Range Rover Classic, Discovery 1.

Description: Steering rod ball joint by Lemfoerder with right hand thread into rod. Supplied with castle nut, washer and split pin.

Approximate dimensions: 11/16"UNF thread to tube, length 10.8cm(4.25"), height 9.7cm(3.8").

Previous part numbers: GSJ151, GSJ205, NRC6007, RTC1800.


Price: 10.74 (12.89 Including VAT at 20%)





Related products:
1. Ball Joint Separator (Ref: ZZLAS2708)
Track Rod End - RH Thread
Track Rod End - LH Thread Ref: RTC5870=
Application: Defender and Discovery 1.

Description: Steering rod ball joint by Lemfoerder with left hand thread into rod. Supplied with castle nut, washer and split pin.

Approximate dimensions: 11/16"UNF thread to tube, length 10.8cm(4.25"), height 9.7cm(3.8").

Previous part numbers: GSJ202, NTC1887.


Price: 10.90 (13.08 Including VAT at 20%)





Related products:
1. Ball Joint Separator (Ref: ZZLAS2708)
Track Rod End - LH Thread
Clamp Kit for Steering Rods Ref: 577898KIT
Application: Series 1, Series 2, Series 3, Defender, Discovery 1, and Range Rover Classic.

Description: Clamp kit for retaining steering ball joints in ends of steering rods.

Approximate dimensions: Clamp measures 33.5mm(1.3") x 39mm(1.5") x 13.5mm(0.53"), bolt 1/4"UNF x 2" long.

Price: 1.00 (1.20 Including VAT at 20%)




People who bought this item also bought:
1. Steering Box Repair Kit (Ref: STRGBOXKIT01)
2. Steering Ball Joint Series 3 - LH thread (Ref: RTC5868=)
3. Steering Ball Joint Series 3 - RH thread (Ref: RTC5867=)
Clamp Kit for Steering Rods
Digital Dispensary > DISCOVERY 1 parts > Discovery 1 Steering System

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

LH Wing Front Panel

LH Wing Front Panel

147.90

Application: Series 2 and Series 2A to approximately 1969.

Description: Reproduction wing front panel in aluminium.

Approximate dimensions: 47cm(18.5") by 39cm(15.4")

find out more

RH Wing Front Panel

RH Wing Front Panel

147.90

Application: Series 2 and Series 2A to approximately 1969.

Description: Reproduction wing front panel in aluminium.

Approximate dimensions: 47cm(18.5") by 39cm(15.4")

find out more

Gasket for Pinion Oil Seal - Salisbury

Gasket for Pinion Oil Seal - Salisbury

0.42

Application: Series 3 long wheel base and Defender 110 when fitted with Salisbury rear axle.

Description: Gasket for pinion oil seal.

Approximate dimensions: Outside diameter 80.5mm(3.17"), inside diameter 70mm(2.75"), 1mm(0.040") thick.

find out more

Gasket for Salisbury Diff Pan

Gasket for Salisbury Diff Pan

1.02

Application: Series 3 long wheel base and Defender 110 when fitted with Salisbury back axle.

Description: Cork gasket for Salisbury differential access pan.

Approximate dimensions: 31cm(12.2") x 28cm(11") x 1mm(0.040") thick.

find out more

Lock Nut - Salisbury Pinion

Lock Nut - Salisbury Pinion

5.52

Application: Series 3 long wheel base and Defender 110 when fitted with Salisbury back axle.

Description: Lock Nut for pinion shaft on Salisbury differential.

Approximate dimensions: 32mm(1.25") across flats, length 17.5mm(0.69"), thread 7/8"UNF.

find out more

Castellated Nut

Castellated Nut

0.96

Application: Series 1, Series 2, Series 3, Range Rover Classic and Defender.

Description: Castellate nut for retainig differential drive flange and also for retaining output flanges on LT76 gearbox.

Approximate dimesions: 12(25.4mm) across flats, 13.7mm(0.54") long.

find out more

Drive Flange for Differential

Drive Flange for Differential

9.60

Application: Series 1, Series 2, Series 2A, Series 3, Range Rover Classic and Defender with Rover type differentials.

Description: Replacement differential drive flange with 4 spline pinion shaft.

Approximate dimesions: Flange 80mm(3.15") x 70.5mm(2.78"), length 47.5mm(1.87"), internal diameter 25.8mm(1.02").

find out more

Second Speed Gear Pair

Second Speed Gear Pair

52.99

Application: Series 1 and Series 2 up to suffix 'C' inclusive gearboxes.

Description: Replacement matched pair of gears for second speed in part - syncromesh gearboxes.

Approximater dimensions: Mainshaft gear: outside diameter 92mm(3.62"), inside diameter 39.8mm(1.57"), length 32mm(1.26"), 29 teeth.
Layshaft gear: outside diameter 70.6mm(2.78"), inside diameter 33.5mm(1.32"), length 27mm(1.06"), 22 teeth, 10 internal splines.

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -