Digital Dispensary

Product Sections


Best Sellers

Brass Nut 5/16"BSF

Brass Nut 5/16

1.66

Application: Series1 exhaust manifold.

Description: Brass nut 5/16"BSF for holding downpipe to exhaust manifold.

Approximate dimensions: 3/8"(9.5mm) high, 17/32"(13.5mm) across flats.

find out more

Grommet - Brake Pipe Support

Grommet - Brake Pipe Support

0.31

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Grommet to support brake pipe on rear axle casing. Used with clip 56666.
Approximate dimensions: overall length 21.5mm(0.85"), inside diameter 7mm(0.3"), outside diameter 14.5mm(0.6")
find out more

Clip for brake pipe grommet

Clip for brake pipe grommet

0.61

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Clip for brake pipe support grommet 6860L. Used on rear axle casing on all Series models from 1954 to 1984.
Approximate dimensions: 11mm(7/16") wide, 34mm(1.3") long, mounting hole 5mm(0.2") diameter, internal diameter of clip when closed 13mm.
find out more

Ignition Coil

Ignition Coil

30.11

Application: Series 1 and Series 2.
Description: Reproduction ignition coil with screw in high tension connection. Supplied with acorn nut and split washer.
Approximate dimensions: Body diameter 54.8mm(2.2"), height 15cm(5.9")
find out more

Stud for Exhaust Manifold

Stud for Exhaust Manifold

1.85

Application: Series 1 1.6 and 2.0 litre, Series 2 2 litre.

Description: Stud to hold downpipe to exhaust manifold.

Approximate dimesions: 5/16"BSF threads to both ends, overall length 1.25"(32mm)

find out more

Black High Tension Lead, Copper Cored

Black High Tension Lead, Copper Cored

1.86

Application: Series One and Series Two
Description: Black high tension cable for spark plugs. 7mm(0.28") outside diameter with 19 strand copper core.

Sold by the metre
find out more

Rocker Cover Gasket

Rocker Cover Gasket

7.72

Application: 1.6ltr and 2.0ltr petrol (gasolene) engines.

Description: Gasket for rocker cover to cylinder head.
find out more

Gasket Exhaust Manifold to Down Pipe

Gasket Exhaust Manifold to Down Pipe

0.96

Application: Series 1, 2 & 3 four cylinder engines.
Description: Square flange gasket for exhaust. Used on various exhaust manifolds and on some pipe to pipe exhaust joints.
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

These Superb Prices are ONLY available when you order ON-LINE

Page:  1  2   >   >>
Clutch Master Cylinder Series 2A Ref: 90569126
Application: Series 2A models with remote reservoir.
Description: Lucas - TRW clutch master cylinder with cast iron body. Also used as brake master on some models - see brake section.
Approximate dimensions: Length of body 130mm, pushrod 80mm, bore 19mm (3/4"), mounting centres 57mm.

Price: 30.02 (36.02 Including VAT at 20%)



Clutch Master Cylinder Series 2A
Clutch Master Cylinder Series 2A - replacement. Ref: 90569126D
Application: Series 2A models with remote reservoir.
Description: Plain box clutch master cylinder with cast iron body. Also used as brake master on some models - see brake section.
Approximate dimensions: Length of body 130mm, pushrod 80mm, bore 19mm (3/4"), mounting centres 57mm.

Price: 12.00 (14.40 Including VAT at 20%)



Clutch Master Cylinder Series 2A - replacement.
Clutch Master Cylinder Ref: 550732=
Application: Series 3 and Defender. Can be retro fitted to Series 2A.
Description: Clutch master cylinder by Lucas - TRW. Bore diameter 3/4" (19mm)

Price: 26.68 (32.02 Including VAT at 20%)



Clutch Master Cylinder
Clutch Master Cylinder Ref: ANR2186
Application: Range Rover Classic chassis number MA onwards, Discovery 1 V8 chassis number MA onwards. Discovery 1 North American Specification from chassis number SA onwards.
Description: Lockheed Delphi LM15976 clutch master cylinder.
Approximate dimensions: overall length including pushrod 237mm (9.33"), bore 19mm (0.75"), mounting hole centres 58mm (2.28").

Price: 36.34 (43.61 Including VAT at 20%)



Clutch Master Cylinder
Clutch Slave Cylinder Series 2/2A Ref: 266694D
Application: Series 2 and 2A models with part syncromesh gearbox.
Description: Non genuine clutch slave cylinder which is mounted vertically in bracket on right hand side of gearbox. This cylinder has body of cast aluminium alloy.
Approximate dimensions: overall length 110mm, bore 22mm(7/8"), mounting bolts approx 66mm centres.

Price: 12.00 (14.40 Including VAT at 20%)




People who bought this item also bought:
1. Spigot Bush (Ref: LFB500050)
2. Clutch Plate 9.5" (Ref: 8510290)
3. Series 2A Optional 9.5" Clutch Cover (Ref: 571228)
Clutch Slave Cylinder Series 2/2A
Clutch Slave Cylinder Series 3 and Defender 4 cylinder Ref: 591231=
Application: Series 3 four and six cylinder engines. Defender four cylinder engines in conjunction with LT77 gearbox, upto approximately 1994.
Description: Lucas - TRW PJH120 clutch slave cylinder with cast iron body.
Approximate dimensions: Overall length 115mm, bore 22mm (7/8"), mounting centres 63mm.

Price: 20.37 (24.44 Including VAT at 20%)



Clutch Slave Cylinder Series 3 and Defender 4 cylinder
Clutch Slave Cylinder for 109 V8 and Defender V8 Ref: FTC5071
Application: Series 3 109 V8, Defender V8 with LT85, LT77 and R380 gearboxes.
Description: Lockheed - Delphi LL13312 clutch slave cylinder with cast iron body.
Approxomate dimensions: Overall length 110mm, bore 25mm (1"), mounting bolts centres 63mm.


Price: 24.81 (29.77 Including VAT at 20%)



Clutch Slave Cylinder for 109 V8 and Defender V8
Clutch Slave Cylinder - R380 Gearbox Ref: FTC5072
Application: The following vehicles when fitted with R380 gearbox. Discovery 1 V8, 300TDi and MPi, Classic Range Rover V8 and 300TDi, Defender 300TDi.
Description: Lockheed Delphi LL15965 clutch slave cylinder.
Approximate dimensions: overall length 110mm (4.33"), bore 22.5mm (0.89"), mounting hole centres 63mm (2.48").

Price: 27.52 (33.02 Including VAT at 20%)



Clutch Slave Cylinder - R380 Gearbox
Seal Kit for Clutch Master Cylinder Ref: STC1126
Application: Discovery 1 1989 to 1998, Range Rover Classic 1972 to 1995. Suitable for clucth master cylinders AEU1714 and ANR2186.
Description: Genuine seal kit with instructions. Old parrt number BAU1252.

Price: 6.72 (8.06 Including VAT at 20%)



Seal Kit for Clutch Master Cylinder
Clutch Hose Series 3 Ref: RTC5940D
Application: Series 3 with 4 cylinder engine.

Description: Replacement flexible hose for clutch. This hose has 7/16"UNF threads both ends.

Approximate dimensions: Overall length 15.7cm(6.2")

Price: 4.50 (5.40 Including VAT at 20%)



Clutch Hose Series 3
Page:  1  2   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Lever Arm for 4WD Select

Lever Arm for 4WD Select

15.80

Application: Series 1 to 1955.

Description: Lever arm with bronze bush to middle hole for selection of four wheel drive in high ratio.

Approximate dimensions: Overall length 116mm(4.6"), width 15.5mm(0.61"), thickness 6mm(0.24"), distance from centre of bushed hole to centre of slotted hole 36mm(1.42"), distance from centre of bushed hole to other hole is 68mm(2.67")

find out more

Olive for Vacuum Pipe

Olive for Vacuum Pipe

0.84

Application: Series 1 and Series2 with Solex 32PBI carburettor.

Description: Brass olive for use with 1/8" copper pipe.

Approximate dimensions: Length 4.7mm(0.19"), outside diameter 4.7mm(0.19"), internal dimater 1/8"(3.2mm).

find out more

Male Union for Vacuum Pipe

Male Union for Vacuum Pipe

2.40

Application: Series 1 and Series 2A.

Description: Brass male union for 1/8" copper pipe. Threaded to fit Solex 32PBI.

Aproximate dimensions: Length 10mm(0.39"), internal diameter 1/8"(3.2mm), hex 9mm(0.35") across flats, thread 1/4"BSF.

find out more

Grommet for vacuum pipe

Grommet for vacuum pipe

3.83

Application: Series 1 and Series 2A.

Description: Split rubber grommet for us with 214228 retaining clip. Used on 1/8" diameter copper vacuum pipe.

Approximate dimensions: Length 17mm(0.67"), internal diameter 3mm(1/8"), overall diameter 9mm(0.35")

find out more

Retaining Clip for Vacuum Pipe

Retaining Clip for Vacuum Pipe

2.78

Application: Series 1 and Series 2A.

Description: Retaining clip for copper vacuum pipe for advance and retard.

Approximate dimensions: 41.5mm(1.6") x 13mm(0.5") x 9mm(0.35"). Mounting hole 7mm(0.28")

find out more

Installer Oil Seal

Installer Oil Seal

33.79

Application: Evoque and Freelander 2.

Description: Installer for bellhousing differential oil seal. Use with 307-520.

Approximate dimensions: Overall diameter 80mm(3.15"), inside diameter 54mm(2.13"), height 48.5mm(1.9").

find out more

Installer Oilseal

Installer Oilseal

155.89

Application: Evoque and Freelander 2.

Description: Installer for quillshaft oil seal. Use with 307-520.

Approximate dimensions: Overall diameter 80mm(3.15"), height 64mm(2.52").


find out more

Pinion Bearing for Salisbury Differential

Pinion Bearing for Salisbury Differential

12.37

Application: Series 3 Long Wheel Base and Defender 110 models with rear Salisbury axle.

Descrtiption: Timken/Japanese sourced outer pinion taper roller bearing for Salisbury differentials.

Approximate dimensions: Outside diameter 2.85"(72.3mm), inside diameter 1 3/8"(34.9mm), depth 26.7mm(1.05")

Bearing numbers: HM88649/ HM88610

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -