Digital Dispensary

Product Sections


Best Sellers

Black High Tension Lead, Copper Cored

Black High Tension Lead, Copper Cored

1.86

Application: Series One and Series Two
Description: Black high tension cable for spark plugs. 7mm(0.28") outside diameter with 19 strand copper core.

Sold by the metre
find out more

Spark Plug Champion N5C

Spark Plug Champion N5C

2.00

Application: Series 2A and Series 3 4 cylinder engines with 7:1 compression ratio and all 6 cylinder Series engines. Also applicable to Series 1 engines.
Description: Champion N5C spark plug, original equipment.
Supersession of Series 1 part number 262796.
find out more

Gaiter for Main Gear Lever

Gaiter for Main Gear Lever

2.16

Application: Series 1, Series 2, Series 2A and Series 3 4 & 6 cylinder models.

Description: Reproduction rubber gaiter for main gear lever.

Approximare dimensions: 11.5cm(4.5") square, 3.6cm(1.4") high.

find out more

Contact Breakers Lucas 25D

Contact Breakers Lucas 25D

3.00

Application: Lucas 25D 4cylinder distributor as fitted to Series 2A and early Series 3 petrol engines, also used on late Series 1 engines with the DM2 distributor.

Description: Lucas boxed contact breaker set also known as 'points'.

Original part number 269987.

find out more

Replacement Condensor for Lucas 25D

Replacement Condensor for Lucas 25D

2.68

Application: Lucas 25D 4cylinder distributor as fitted to Series 2A and early Series 3 petrol engines.Also used on late Series 1 engines.

Description: No longer Lucas boxed condensor as the Lucas ones have a different connector on lead now that makes fixing ackward. So now sourcing from good after market source to original style of Lucas unit!

Approximate dimensions: overall diameter 17mm (0.67 inches), lead 57mm (2.24 inches).

Original part numbers 269988, 245007. DCB101, GSC101

find out more

Pack of 10 7/16" BSF Plain Nuts

Pack of 10 7/16

1.92

Pack of ten 7/16" BSF plain nuts, 45/64"(17.8mm) across flats, 3/8"(9.3mm) high.
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Brass Nut 5/16"BSF

Brass Nut 5/16

1.66

Application: Series1 exhaust manifold.

Description: Brass nut 5/16"BSF for holding downpipe to exhaust manifold.

Approximate dimensions: 3/8"(9.5mm) high, 17/32"(13.5mm) across flats.

find out more

Gaiter for Handbrake Lever

Gaiter for Handbrake Lever

2.70

Application: Late Series 2A and Series 3.

Description: Reproduction rubber gaiter for handbrake lever. This is for the later style lever that curves upwards to nearly vertical.

Approximate dimensions: Height 168mm(6.6"), depth 110mm(4.3")

find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > LAND Rover Series 2 & Series 3 Parts > Axles and Propshafts for Land Rover Series 2 and 3
Page:   <<   <  1  2  3  4  5  ...   >   >>
Drive Flange for Differential Ref: 236632D
Application: Series 1, Series 2, Series 2A, Series 3, Range Rover Classic and Defender with Rover type differentials.

Description: Replacement differential drive flange with 4 spline pinion shaft.

Approximate dimesions: Flange 80mm(3.15") x 70.5mm(2.78"), length 47.5mm(1.87"), internal diameter 25.8mm(1.02").

Price: 8.00 (9.60 Including VAT at 20%)



Drive Flange for Differential
Castellated Nut Ref: 3259
Application: Series 1, Series 2, Series 3, Range Rover Classic and Defender.

Description: Castellate nut for retainig differential drive flange and also for retaining output flanges on LT76 gearbox.

Approximate dimesions: 12(25.4mm) across flats, 13.7mm(0.54") long.

Price: 0.80 (0.96 Including VAT at 20%)



Castellated Nut
Diff Pinion Bearing, Outer Ref: 100897
Application: Series 1 and early Series 2.

Description: Taper roller bearing on outer end of pinion gear in differential.

Approximate dimensions: Outside diameter 72.7mm(2.86"), inside diameter 31.8mm(1.25"), thickness 30.3mm(1.19")

Bearing numbers: Inner 4T-31888, outer 4T-3120

Previous part number: 219550

Price: 28.83 (34.60 Including VAT at 20%)




People who bought this item also bought:
1. Semi flexible pouring spout (Ref: ZZGJC002)
2. Oil Seal Differential Pinion (Ref: FRC4586)
3. Pair of Electrical Sockets (Ref: CAB189)
Diff Pinion Bearing, Outer
Diff Pinion Bearing, Inner Ref: 219544
Application: Series 1 and Series 2 to suffix A chassis numbers.

Description: Taper roller bearing on inner end of pinion gear of differential. Equivalent to Timken bearings 3490/3420.

Approximate dimensions: Outside diameter 3.125"(79.4mm), inside diameter 1.5"(38.1mm), depth 1.25"(32mm)

Price: 38.00 (45.60 Including VAT at 20%)



Diff Pinion Bearing, Inner
Inner Pinion Bearing - Differential Ref: 539706=
Application: Series 2 from suffix B chassis onwards, Series3 and Classic models where Rover type differentials are fitted.

Description: Timken taper roller bearing for inner end of differential pinion gear. Timken bearing numbers HM801346X/HM801310

Approximate dimensions: Outside diameter 3.25"(82.5mm), inside diameter 1.5"(38mm)., height 1.22"(31mm).

Price: 18.08 (21.70 Including VAT at 20%)



Inner Pinion Bearing - Differential
Outer Pinion Bearing Ref: 539707=
Application: Series 2 from suffix B chassis onwards, Series3 and Classic models where Rover type differentials are fitted.

Description: Timken taper roller bearing for outer end of differential pinion gear. Timken bearing numbers HM88046/HM88010

Approximate dimensions: Outside diameter 2.7"(68.5mm), inside diameter 1.25"(31.8mm)., height 0.93"(23.5mm).


Price: 8.93 (10.72 Including VAT at 20%)



Outer Pinion Bearing
Bearing, Differential Support Ref: 41045
Application: Series 1, Series 2 and Series 3 to suffix 'G' chassis number with Rover type differentials.

Description: Taper roller bearing used in pairs to support axle differential. Bearing is numbered 2729/2788.

Approximate dimensions: outside diameter 3" (76.4mm), inside diameter 1.5"(38mm).

Price: 15.00 (18.00 Including VAT at 20%)



Bearing, Differential Support
Bearing, Differential Support Ref: RTC2726
Application: Rover type differentials in Series 3 - suffix H onwards, Range Rover Classic, Defender and Discovery 1.

Description: Timken taper roller bearing for differential carrier. Bearing numbers LM501349/LM501310

Approximate dimensions: Overall diameter 73.5mm( 3.9"), internal diameter 41.3mm(1.63"), depth 20.7mm(0.81")

Price: 7.95 (9.54 Including VAT at 20%)



Bearing, Differential Support
Gear Set - Differential Ref: RTC4489
Application: Series 1, 2 & 3 Rover type differentials.

Description: set of 4 gears and 6 shims for differential.

Original part numbers; set includes 2 each of 06735 & 40760. Later gear numbers are 533777 and 533794

Price: 56.99 (68.39 Including VAT at 20%)



Gear Set - Differential
Oil Seal Differential Pinion Ref: FRC4586
Application: Series 1, 2 & 3 Rover type differentials.

Description: Oil seal to nose of differential. Corteco/Gaco boxed.

Approximate dimensions: outside diameter 70mm (2.76"), thickness 12.5mm (0.5").

Original part number: 217507.

Price: 4.34 (5.21 Including VAT at 20%)




People who bought this item also bought:
1. Gasket for Differential to Axle Casing (Ref: 7316)
2. Pair of Gearbox Mounts for Series 1 (Ref: S1GBOXMNTS)
3. Oil Seal between Crankshaft and Front Cover (Ref: ERR6490)
Oil Seal Differential Pinion
Digital Dispensary > LAND Rover Series 2 & Series 3 Parts > Axles and Propshafts for Land Rover Series 2 and 3
Page:   <<   <  1  2  3  4  5  ...   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

LH Wing Front Panel

LH Wing Front Panel

147.90

Application: Series 2 and Series 2A to approximately 1969.

Description: Reproduction wing front panel in aluminium.

Approximate dimensions: 47cm(18.5") by 39cm(15.4")

find out more

RH Wing Front Panel

RH Wing Front Panel

147.90

Application: Series 2 and Series 2A to approximately 1969.

Description: Reproduction wing front panel in aluminium.

Approximate dimensions: 47cm(18.5") by 39cm(15.4")

find out more

Gasket for Pinion Oil Seal - Salisbury

Gasket for Pinion Oil Seal - Salisbury

0.42

Application: Series 3 long wheel base and Defender 110 when fitted with Salisbury rear axle.

Description: Gasket for pinion oil seal.

Approximate dimensions: Outside diameter 80.5mm(3.17"), inside diameter 70mm(2.75"), 1mm(0.040") thick.

find out more

Gasket for Salisbury Diff Pan

Gasket for Salisbury Diff Pan

1.02

Application: Series 3 long wheel base and Defender 110 when fitted with Salisbury back axle.

Description: Cork gasket for Salisbury differential access pan.

Approximate dimensions: 31cm(12.2") x 28cm(11") x 1mm(0.040") thick.

find out more

Lock Nut - Salisbury Pinion

Lock Nut - Salisbury Pinion

5.52

Application: Series 3 long wheel base and Defender 110 when fitted with Salisbury back axle.

Description: Lock Nut for pinion shaft on Salisbury differential.

Approximate dimensions: 32mm(1.25") across flats, length 17.5mm(0.69"), thread 7/8"UNF.

find out more

Castellated Nut

Castellated Nut

0.96

Application: Series 1, Series 2, Series 3, Range Rover Classic and Defender.

Description: Castellate nut for retainig differential drive flange and also for retaining output flanges on LT76 gearbox.

Approximate dimesions: 12(25.4mm) across flats, 13.7mm(0.54") long.

find out more

Drive Flange for Differential

Drive Flange for Differential

9.60

Application: Series 1, Series 2, Series 2A, Series 3, Range Rover Classic and Defender with Rover type differentials.

Description: Replacement differential drive flange with 4 spline pinion shaft.

Approximate dimesions: Flange 80mm(3.15") x 70.5mm(2.78"), length 47.5mm(1.87"), internal diameter 25.8mm(1.02").

find out more

Second Speed Gear Pair

Second Speed Gear Pair

52.99

Application: Series 1 and Series 2 up to suffix 'C' inclusive gearboxes.

Description: Replacement matched pair of gears for second speed in part - syncromesh gearboxes.

Approximater dimensions: Mainshaft gear: outside diameter 92mm(3.62"), inside diameter 39.8mm(1.57"), length 32mm(1.26"), 29 teeth.
Layshaft gear: outside diameter 70.6mm(2.78"), inside diameter 33.5mm(1.32"), length 27mm(1.06"), 22 teeth, 10 internal splines.

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -