Digital Dispensary
  •  
  • View Basket
  • Checkout
  • Items:, Value:

Product Sections


Best Sellers

Injector Remover TD5

Injector Remover TD5

111.91

Application: TD5 diesel engine as fitted to Defender and Discovery2.
Description: Slide hammer type remover for injectors

find out more

Water Pump Series1 Petrol

Water Pump Series1 Petrol

48.00

Application: Series 1 1.6ltr & 2.0ltr petrol (gasolene) engines.
Description: Reproduction cast iron water pump, supplied with gaskets.
find out more

Axle Set of Brake Shoes - 10"

Axle Set of Brake Shoes - 10

30.00

Axle set of 4 10inch brake shoes by Lucas-TRW plus 4x pull-off springs, 6x imperial brake drum screws, 2x metric brake drum screws, 2 locking plates and 4 screws for anchor plates.

Application: Series1 86" & 88" front and rear axles, Series 2/2A SWB front and rear, Series3 SWB front and rear to June 1980, Series3 SWB rear only from July 1980, Defender 90 rear to 1994.
find out more

Pair of Replacement Brake Hoses S2A & S3

Pair of Replacement Brake Hoses S2A & S3

12.00

Application: Series 2A 88" front and rear, Series 2A 109" front.
Description: Pair of replacement flexible brake hoses with star washers, retaining nuts and copper sealing washers. Overall length of each hose 39.5cm (15.6"), thread 3/8UNF.
find out more

Genuine Oil Filter Element RTC3183

Genuine Oil Filter Element RTC3183

5.06

Application: Series1 2 litre petrol, S2A & S3 2.6 litre 6 cylinder petrol.
Approximate dimensions: 70mm diameter x 173mm long.
find out more

Pinion Flange Remover-Replacer

Pinion Flange Remover-Replacer

172.76

Application:Freelander 2, 2006 onwards.
Description: Two part tool for removing and replacing pinion drive flange on rear differential.
Approximate dimensions: Inner tool - 160mm( 6.3") long, 3/4"(19mm) socket drive, fine spline(24) 24mm(0.95") overall diameter. Outer tool - 150mm(5.9") long, with 135mm(5.3") reaction arm. double hex(12point) socket 41mmAF
find out more

These Superb Prices are ONLY available when you order ON-LINE

Tools from 2002 onwardsTools from 2002 onwards
Land Rover have re-numbered their tools and new ones from 2002 onwards have only a new style part number. This section is devoted to these new tools.
Engine Tools - Part 1Engine Tools - Part 1
Tools for engines from Series 2a upto the latest TD6 in the Range Rover Generation Three. Part one lists tools numbered from LRT-12-001 to LRT-12-099
Engine Tools - Part2Engine Tools - Part2
Tools for engines from Series 2a upto the latest TD6 in the Range Rover Generation Three. Part two lists tools numbered from LRT-12-100 onwards
Gearbox and Transfer Box ToolsGearbox and Transfer Box Tools
Special tools for repair and service of gearboxes and transfer boxes (transmissions).
Other toolsOther tools
All other tools apart from engine and gearbox tools. That is axles, suspension, fuel etc, etc

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Vacuum Pipe Straight Connector

Vacuum Pipe Straight Connector

0.54

Application: Series 2 and 3 models with petrol engines.

Description: Straight connector for vacuum pipe to disributor and/or inlet manifold.

Approximate dimensions: Outside diameter 11mm(7/16"), inside diameter 3mm(0.12") one end and 4mm(0.16") other end, length 27.5mm(1.08").

find out more

Vacuum Pipe Elbow

Vacuum Pipe Elbow

2.34

Application: Series 2 and 3 petrol engined models.

Description: Rubber elbow connector for vacuum pipe to distributor and/or to inlet manifold.

Approximate dimensions: Outside diameter 11mm(7/16"), internaldiameter 3mm(0.12") one end and 4mm(0.16") the other end. length 28mm(1.1") x 23mm(0.91").

find out more

Third Speed Gear Pair

Third Speed Gear Pair

57.84

Application: Series 1 and Series 2 with part syncromesh gearbox.

Description: Matched pair of gears for third speed.

Approximate dimensions: Mainshaft gearf - 24 teeth, outside diameter of gear 76mm(3.0"), inside diameter 39.6mm(1.56"), lrngth 47.5mm(1.87"). Layshaft gear - 27 teeth, outside diameter 85mm(3.35"), inside diameter 33.4mm(1.32"), length 25.4mm(1"), 10 internal splines.

find out more

Bearing Layshaft Front

Bearing Layshaft Front

5.40

Application: Series 2A suffix B gearbox onwards, Series 3.

Description: Singlre row ball bearing (6305C3) to Original Equipment specification. Supports front end of layshaft.

Approximate dimensions: Outside diameter 80mm(3.15"), inside diameter 25mm(12), thickness 17mm(0.7").

find out more

Caged Needle Bearing Assembly

Caged Needle Bearing Assembly

5.10

Application: Series 2A suffix B gearbox onwards, Series 3.

Description: EU made bearing for the intermediate shaft of the transfer box. Nylon caged needle bearing assembly, 2 per shaft.

Approximate dimensions: Length 42mm(1.65"), outside diameter 55.5mm(2.2"), inside diameter 39mm(1.54").

find out more

Parts Catalogue Defender 1986 to 2002

Parts Catalogue Defender 1986 to 2002

56.50

Defender Parts Catalogue, covers all Defenders (90, 110 &130) from approx 1986 to 2006. 2.25petrol, 2.5 petrol, 2.5 diesel, 2.5 turbo diesel, 200TDi, 300TDi, TD5, V8 carb and V8 efi.

This is a massive book measuring 297mm(11.7") x 207mm(8.2") x 44mm(1.73") thick containing 100s of pages. This is a reprint by Brookland Books.

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -