Digital Dispensary

Product Sections


Best Sellers

Rebuild kit for Solex 32PBI-2 Carburettor

Rebuild kit for Solex 32PBI-2 Carburettor

66.04

Application: Series 1 2.0litre engine 1952 to 1958 fitted with Solex 32PBI-2 carburettor. Zenith part number ZRK17.
Description: A fairly comprehensive kit of parts to rebuild this carburettor.


find out more

Screw for retaining Brake Drums

Screw for retaining Brake Drums

0.25

Application: Series 1, 2 & 3.
Description: Countersunk head screw 3/8"BSW by 5/8" long.
find out more

Acorn for HT Leads

Acorn for HT Leads

1.49

Application: Series One and Series Two. 1948 to 1961 approx.
Description: Acorn nut for retaining high tensions leads to distributor caps and plug caps. Use with 217279 brass washers and copper cored high tension cable.
Approximate dimensions: height 24mm(0.95"), overall diameter 15.4mm(0.6"), thread diameter 12.5mm(0.5")
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

12.58

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Seal Kit - front wheel cylinders

Seal Kit - front wheel cylinders

3.00

Application: Series 1, 2 & 3.
Description: Replacement seal kit for pair of 1.25" bore wheel cylinders. Contains 4 cup seals for pistons, 4 dust seals for cylinder ends and 2 dust caps for bleed screws. Suits cylinders 243296 and 243297.
find out more

Inner Wheel Hub Seal

Inner Wheel Hub Seal

4.28

Application: Series 1 front axles, Series 2 & Series 3 to 1980.
Description: Inner hub oil seal made by Corteco/Gaco.
Approximate dimensions: outside diameter 85mm (3.35"), thickness 7.8mm (0.3").
Original part number 239422.

find out more

Felt Seal Stub Shaft to Drive Flange

Felt Seal Stub Shaft to Drive Flange

0.48

Application: Series 1 front axles, Series 2 front and rear axles, Series 3 SWB front and rear axles.
Description: Felt seal for 10 spline axle shafts to outer drive flanges.
Original part number 272086
find out more

Felt Seal for Series 1 Pedals

Felt Seal for Series 1 Pedals

3.66

Application: Series 1 brake and clutch pedals.
Description: felt seal for brake and clutch pedals. Used with grommet 70620.
Approximate dimensions: 60mm (2.4") long, 44mm (1.7") wide, 15mm (0.6") deep.
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > LAND Rover Series 2 & Series 3 Parts > Electrical Parts for Land Rover Series 2 and 3
Page:   <<   <  6  7  8  9  10  ...   >   >>
Main Wiring Harness Series 3 Diesel Ref: ZZLR317
Application: Series 3 diesel Right Hand Drive to January 1983.
Description: Reproduction wiring harness equivalent to PRC1348 and PRC2533. With rear fog and reverse lamps.

Price: 195.00 (234.00 Including VAT at 20%)



Main Wiring Harness Series 3 Diesel
Main Wiring Harness Series 3 Diesel Ref: ZZLR318
Application: Series 3 diesel Left Hand Drive to January 1983.
Description: Reproduction main wiring harness equivalent to PRC1349 and PRC2534. With rear fog and reverse lamps.

Price: 195.00 (234.00 Including VAT at 20%)



Main Wiring Harness Series 3 Diesel
Solenoid Switch for Starter Ref: 13H5952LD
Application: Series 2A and Series 3 petrol models (not V*).

Description: Lucas SRB325 starter solenoid switch.

Approximate dimensions: Height 76mm(3"), width 55mm(2.2"), depth 63mm(2.5").

Price: 12.07 (14.48 Including VAT at 20%)



Solenoid Switch for Starter
Pair of Electrical Sockets Ref: CAB189D
Application: Series 1, 2 & 3.
Description: Pair of sockets for charging and/or auxilliary electrical equipment. One negative and one positive terminal. Cheaper replacement version.

Alternative part number: CAB189

Price: 10.08 (12.10 Including VAT at 20%)




People who bought this item also bought:
1. Seal Kit for Brake Master Cylinder (Ref: ZZSP1975-5)
2. Set of Rivets for Bonnet Strip (Ref: 68087x12)
3. Bonnet Rest Strip (Ref: 300824A)
Pair of Electrical Sockets
2 Pin Plug Ref: CAB185D
Application: Series 1, Series 2/2A and Series 3.

Description: Reproduction plug for the auxilliary sockets on dashboard. Cheaper replacement version.


Price: 10.80 (12.96 Including VAT at 20%)



2 Pin Plug
Bulb Holder - Push-In Ref: ZZAS611
Application: Series1, 2, 2A & 3 instrument illumination.
Description: Metal bulb holder for 15.9mm (5/8") hole. Earths through body of instrument. Takes 987 bulb. This bulb holder is now no longer available, use ZZAS612.

Price: 3.21 (3.85 Including VAT at 20%)


Bulb Holder - Push-In
Bulb Holder - Push-In Ref: ZZAS612
Application: Series1, 2, 2A & 3 instrument illumination.
Description: Metal bulb holder for 15.9mm (5/8") hole. With separate earth connection. Takes capless bulb.

Price: 3.21 (3.85 Including VAT at 20%)




People who bought this item also bought:
1. Front Side Lamp - Wipac (Ref: RTC5012)
2. Nut - Steering Column (Ref: 552804)
Bulb Holder - Push-In
Bulb Holder - Defender Instruments Ref: ZZAS614
Application: Series 3 warning lamps in speedometer head, Defender instrument illumination.
Description: Plastic push-in bulb holder with 2 contacts to suit 12.5mm (0.5") tube. Supplied with 504 capless bulb.

Price: 2.20 (2.64 Including VAT at 20%)



Bulb Holder - Defender Instruments
Front Side Lamp - Wipac Ref: RTC5012
Application: Series 3 and Defender to 1994.

Description: Wipac branded lamp with clear lens. No bulb included. Wires, one black and one red.

Approximate dimensions: Lens diameter 67.5mm(2.7"), cable length 91cm(3').

Price: 4.05 (4.86 Including VAT at 20%)




People who bought this item also bought:
1. Bulb Holder - Push-In (Ref: ZZAS612)
2. Nut - Steering Column (Ref: 552804)
Front Side Lamp - Wipac
Front Indicator Lamp - Wipac Ref: RTC5013
Application: Series 3 and Defender to 1994.

Description: Wipac branded lamp with amber lens. No bulb included. Wires, one black and one green.

Approximate dimensions: Lens diameter 67.5mm(2.7"), cable length 91cm(3').

Price: 4.05 (4.86 Including VAT at 20%)



Front Indicator Lamp - Wipac
Digital Dispensary > LAND Rover Series 2 & Series 3 Parts > Electrical Parts for Land Rover Series 2 and 3
Page:   <<   <  6  7  8  9  10  ...   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Piston Assembly 2.4TDCI

Piston Assembly 2.4TDCI

122.63

Application: Defender from 2007 to 2012 with 2.4 litre TDCI engine.

Description: Standard size piston for 89.90mm bore. Supplied with rings, gudgeon pin and circlips. Made by Nural a Federal Mogul company.



find out more

Electric Fuel Pump - Series 1

Electric Fuel Pump - Series 1

100.44

Application: Series 1 Land Rovers 1948 to 1958. Series 2 with 2 litre petrol engine.

Description: Authentic SU electric fuel pump to original pattern. For mounting in engine bay. Can be used on either positive or negative earth vehicles. NB Both outlet and inlet have threaded connectors.

Approximate dimensions: 14cm long, base diameter 73mm. Mounting holes in base are threaded M6

find out more

Repair Kit for Handbrake Adjuster

Repair Kit for Handbrake Adjuster

4.45

Application: Series 2A and Series 3.

Description: Old stock Lucas Girling repair kit for handbrake adjuster. Includes adjusting screw and wedges plus period tube of brake grease.


find out more

Injector for BMW M57 Diesel Engine

Injector for BMW M57 Diesel Engine

183.77

Application: Range Rover L322 with BMW M57 3.0litre diesel engine.

Description: Reconditioned Bosch injector for the M57 engine. Outright purchase, we do not need your old injector in vexchange.

Approximate dimensions: Overall length 22cm(8.7").

find out more

Bearing and Seals kit for Freelander 1 IRD

Bearing and Seals kit for Freelander 1 IRD

72.54

Application: Freelander 1 IRD unit except V6 model.

Description: Set of 7 OE spec bearings and 4 seals to overhaul the intermediate reduction drive unit. This kit does not include the plate for the oil cooler.

find out more

Rear Diff Repair Kit - Freelander2

Rear Diff Repair Kit - Freelander2

103.14

Application: Freelander 2 and Evoque

Description: Repair kit of OE bearings and seals for the rear differential. Kit includes 4x taper roller bearings, 3x oil seals, 2x 'O' rings, collapsible spacer and pinion nut.
find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -