Digital Dispensary

Product Sections


Best Sellers

Gasket Set for Solex 32PBI-2 Carburettor

Gasket Set for Solex 32PBI-2 Carburettor

7.66

Application: Series 1 2.0litre engine 1952 to 1958 fitted with Solex 32PBI-2 carburettor.
Description: Set of 6 gaskets and 8 fibre washers for this carburettor
find out more

Clip for brake pipe grommet

Clip for brake pipe grommet

0.61

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Clip for brake pipe support grommet 6860L. Used on rear axle casing on all Series models from 1954 to 1984.
Approximate dimensions: 11mm(7/16") wide, 34mm(1.3") long, mounting hole 5mm(0.2") diameter, internal diameter of clip when closed 13mm.
find out more

Grommet - Brake Pipe Support

Grommet - Brake Pipe Support

0.31

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Grommet to support brake pipe on rear axle casing. Used with clip 56666.
Approximate dimensions: overall length 21.5mm(0.85"), inside diameter 7mm(0.3"), outside diameter 14.5mm(0.6")
find out more

Felt Seal for Series 1 Pedals

Felt Seal for Series 1 Pedals

3.66

Application: Series 1 brake and clutch pedals.
Description: felt seal for brake and clutch pedals. Used with grommet 70620.
Approximate dimensions: 60mm (2.4") long, 44mm (1.7") wide, 15mm (0.6") deep.
find out more

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

12.58

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Grommet Series 1 Pedals

Grommet Series 1 Pedals

10.80

Application: Series 1 brake and clutch pedals.
Description: Reproduction rubber grommet for brake pedal shaft to floor panel. Use with 70621 felt seal.
find out more

Oil Seal Differential Pinion

Oil Seal Differential Pinion

5.21

Application: Series 1, 2 & 3 Rover type differentials.

Description: Oil seal to nose of differential. Corteco/Gaco boxed.

Approximate dimensions: outside diameter 70mm (2.76"), thickness 12.5mm (0.5").

Original part number: 217507.
find out more

Injector Remover TD5

Injector Remover TD5

117.79

Application: TD5 diesel engine as fitted to Defender and Discovery2.
Description: Slide hammer type remover for injectors

find out more

Gasket for Differential to Axle Casing

Gasket for Differential to Axle Casing

0.60

Application: Rover type differentials on Series 1, 2 & 3. Range Rover Classic, Defender and Discovery 1.
Description: replacement gasket for differential assembly to axle casing.
Approximate dimensions: overall diameter 24.4cm (9.6")
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > LAND Rover Series 2 & Series 3 Parts > Electrical Parts for Land Rover Series 2 and 3
Page:   <<   <  6  7  8  9  10  ...   >   >>
Dip Switch Ref: 541602
Application: Series 2 1961 to 1963.

Description: Reproduction floor mounted dip switch for headlamps. Switch has 3 screw terminals marked 56a, 56 and 56b.

Approximate dimensions: Height 6cm(2.36"), width 5.5cm(2.17"), length 4.5cm(1.77").

Price: 14.50 (17.40 Including VAT at 20%)



Dip Switch
Dip Switch Series 2A Ref: RTC432
Application: Series 2A 1964 to 1971.

Description: Reproduction floor dip switch with 3 Lucar connectors.

Approximate dimensions: Height 52mm(2"), width 51cm(2, depth 23mm(0.9").

Price: 14.65 (17.58 Including VAT at 20%)



Dip Switch Series 2A
Indicator Switch - Series 3 Ref: 575383=
Application: Series 3.

Description: Lucas switch for steering column. Combined switch for indicators, horn, headlamp dip,main and flash. 5 wires to black connector block, 4 wires with Lucar connectors.

Lucas part number: SQB968

Approximate dimensions: Length 23cm(9").

Price: 26.86 (32.23 Including VAT at 20%)




People who bought this item also bought:
1. Bearing Top of Steering Column (Ref: RTC324)
2. Striker - Series 3 Steering Wheel (Ref: 589553)
Indicator Switch - Series 3
Horn Low Note Ref: YEB10027
Application: Series 3, Defender, Discovery 1 and Range Rover Classic.

Description: OEM specification horn low note (410Hz)

Approximate dimensions: 91mm(3.6") x 106mm(4.2") x 90mm(3.5")

Previous part numbers: PRC6322, RTC6461, RTC3368

Price: 7.25 (8.70 Including VAT at 20%)




People who bought this item also bought:
1. Replacement Water Pump V8 (Ref: STC1611D)
2. Thermostat 74 degrees (Ref: 532453)
3. Float for CD175 (Ref: 605833)
Horn Low Note
Brake Light Switch Series 3 Ref: 575166
Application: Series 3 with servo brakes.

Description: Genuine boxed brass brake light switch used on models with servo brakes. Mounted on top of brake pedal box, under the bonnet. Supplied with lock nut.

Approximate dimensions: 3/8"unf mounting thread, overall length 46mm

Price: 35.78 (42.94 Including VAT at 20%)



Brake Light Switch Series 3
Rear Lamp Ref: 589446
Application: Series 2/2A and early Series 3

Description: Replacement rear lamp, red lens with clear window for number plate illumination. With reflector in centre.

Approximate dimensions: Overall diameter 78mm(3.1"), height 37mm(1.5")

Price: 4.50 (5.40 Including VAT at 20%)



Rear Lamp
Lens Military Stop/Tail Lamp Ref: 600858
Application: Series 2, 2A & 3 military models.
Description: Lucas glass screw-in red lens.
Approximate dimensions: Overall diameter 64.5mm(2.5") height 39mm(1.5")

Price: 10.85 (13.02 Including VAT at 20%)



Lens Military Stop/Tail Lamp
Headlamp Rim 7" Ref: 274379
Application: Series 1 and Series 2.

Description: Reproduction chromed headlamp rim of the 3 adjuster type for 7" lamps. Equivalent to Lucas 554872

Approximate dimensions: overall diameter 196mm(7.72"), height 23mm(0.91")

Price: 17.79 (21.35 Including VAT at 20%)




People who bought this item also bought:
1. Rubber Peg for Wiper Blade (Ref: ZZB00100)
2. Set of Rivets for Bonnet Strip (Ref: 68087x12)
3. Bonnet Rest Strip (Ref: 300824A)
Headlamp Rim 7
Twin Quadoptic Kit RHD Ref: RTC4615KW
Kit comprises of two 7" Quadoptic headlamps by Wipac for RHD vehicles (LH dipping). 'E' approved complete with 12v 60/55w H4 halogen bulbs and rubber boots.

Price: 29.63 (35.56 Including VAT at 20%)



Twin Quadoptic Kit RHD
Wiper Motor with switch Ref: ZZS14602
Application: Series 1 and Series 2 with twin wiper motors.
Description: Affordable replacement 12volt 4amp wiper motor. Functional but not cosmetically correct. This motor has a 8mm(0.31") diameter shaft 63mm(2.5") long. Through this projects a 6mm(0.24") diameter spindle which rotates through an arc of 110 degrees.

Price: 63.54 (76.25 Including VAT at 20%)




People who bought this item also bought:
1. Rubber Peg for Wiper Blade (Ref: ZZB00100)
2. Wiper Blade (Ref: 261504)
3. Wiper Arm (Ref: 261503)
Wiper Motor with switch
Digital Dispensary > LAND Rover Series 2 & Series 3 Parts > Electrical Parts for Land Rover Series 2 and 3
Page:   <<   <  6  7  8  9  10  ...   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Outer Pinion Bearing

Outer Pinion Bearing

10.72

Application: Series 2 from suffix B chassis onwards, Series3 and Classic models where Rover type differentials are fitted.

Description: Timken taper roller bearing for outer end of differential pinion gear. Timken bearing numbers HM88046/HM88010

Approximate dimensions: Outside diameter 2.7"(68.5mm), inside diameter 1.25"(31.8mm)., height 0.93"(23.5mm).


find out more

Inner Pinion Bearing - Differential

Inner Pinion Bearing - Differential

21.70

Application: Series 2 from suffix B chassis onwards, Series3 and Classic models where Rover type differentials are fitted.

Description: Timken taper roller bearing for inner end of differential pinion gear. Timken bearing numbers HM801346X/HM801310

Approximate dimensions: Outside diameter 3.25"(82.5mm), inside diameter 1.5"(38mm)., height 1.22"(31mm).

find out more

Seal Kir for 1 1/8" Wheel Cylinders

Seal Kir for 1 1/8

23.26

Application: Series 1 models 1948 and 1949 for chassis numbers 860001 to 867720.

Descrition: Replacement seals for rear wheel cylinders with bore of 1 1/8"(28.5mm). Kit has sufficient seals for both front wheel cylinders.

find out more

Seal Kit for 1 3/8" Wheel Cylinders

Seal Kit for 1 3/8

23.26

Application: Series 1 models 1948 and 1949 for chassis numbers 860001 to 867720.

Descrition: Replacement seals for front wheel cyliders with bore of 1 3/8"(35mm). Kit has sufficient seals for both front wheel cylinders.


find out more

Outlet Nozzle - SU Fuel Pump

Outlet Nozzle - SU Fuel Pump

4.44

Application: Series 1 and early Series 2 models.

Description: Nozzle for outlet of SU fuel pumps. Allows push-on fuel hose connection to pump.

Approximate dimensions: Thread diameter 22mm(0.87"), nozzle diameter 7mm(0.28").

find out more

Wiper Arm Series 3 RH

Wiper Arm Series 3 RH

24.25

Application: Series3 models.

Description: Right hand wiper arm in stainless steel by Tex Classic.

Approximate dimensions: Overall length 24cm(9.5")

find out more

Wiper Arm Series3 LH

Wiper Arm Series3 LH

24.25

Application: Series3 models.

Description: Left hand wiper arm in stainless steel by Tex Classic.

Approximate dimensions: Overall length 24cm(9.5")

find out more

Door Mirror Left Hand

Door Mirror Left Hand

30.78

Application: Range Rover Classic of the mid 70s.

Description: Reproduction black mirror head by Tex with convex glass.

Approximate dimensions: Head 145mm(5.7") x 90mm(3.5"), mounting holes 38mm(1.5") centres.

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -