Digital Dispensary

Product Sections


Best Sellers

Gasket Set for Solex 32PBI-2 Carburettor

Gasket Set for Solex 32PBI-2 Carburettor

7.66

Application: Series 1 2.0litre engine 1952 to 1958 fitted with Solex 32PBI-2 carburettor.
Description: Set of 6 gaskets and 8 fibre washers for this carburettor
find out more

Clip for brake pipe grommet

Clip for brake pipe grommet

0.61

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Clip for brake pipe support grommet 6860L. Used on rear axle casing on all Series models from 1954 to 1984.
Approximate dimensions: 11mm(7/16") wide, 34mm(1.3") long, mounting hole 5mm(0.2") diameter, internal diameter of clip when closed 13mm.
find out more

Grommet - Brake Pipe Support

Grommet - Brake Pipe Support

0.31

Application: Series 1 1954 to 1958, Series 2 and Series 3.
Description: Grommet to support brake pipe on rear axle casing. Used with clip 56666.
Approximate dimensions: overall length 21.5mm(0.85"), inside diameter 7mm(0.3"), outside diameter 14.5mm(0.6")
find out more

Felt Seal for Series 1 Pedals

Felt Seal for Series 1 Pedals

3.66

Application: Series 1 brake and clutch pedals.
Description: felt seal for brake and clutch pedals. Used with grommet 70620.
Approximate dimensions: 60mm (2.4") long, 44mm (1.7") wide, 15mm (0.6") deep.
find out more

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

12.58

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Grommet Series 1 Pedals

Grommet Series 1 Pedals

10.80

Application: Series 1 brake and clutch pedals.
Description: Reproduction rubber grommet for brake pedal shaft to floor panel. Use with 70621 felt seal.
find out more

Oil Seal Differential Pinion

Oil Seal Differential Pinion

5.21

Application: Series 1, 2 & 3 Rover type differentials.

Description: Oil seal to nose of differential. Corteco/Gaco boxed.

Approximate dimensions: outside diameter 70mm (2.76"), thickness 12.5mm (0.5").

Original part number: 217507.
find out more

Injector Remover TD5

Injector Remover TD5

117.79

Application: TD5 diesel engine as fitted to Defender and Discovery2.
Description: Slide hammer type remover for injectors

find out more

Gasket for Differential to Axle Casing

Gasket for Differential to Axle Casing

0.60

Application: Rover type differentials on Series 1, 2 & 3. Range Rover Classic, Defender and Discovery 1.
Description: replacement gasket for differential assembly to axle casing.
Approximate dimensions: overall diameter 24.4cm (9.6")
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > LAND Rover Series 2 & Series 3 Parts > Electrical Parts for Land Rover Series 2 and 3
Page:   <<   <  6  7  8  9  10  ...   >   >>
2 Pin Plug Ref: CAB185
Application: Series 1, Series 2/2A and Series 3.

Description: Reproduction plug for the auxilliary sockets on dashboard. Good quality plug to original pattern.

Price: 19.42 (23.30 Including VAT at 20%)



2 Pin Plug
Bulb Holder - Push-In Ref: ZZAS611
Application: Series1, 2, 2A & 3 instrument illumination.
Description: Metal bulb holder for 15.9mm (5/8") hole. Earths through body of instrument. Takes 987 bulb. This bulb holder is now no longer available, use ZZAS612.

Price: 3.21 (3.85 Including VAT at 20%)


Bulb Holder - Push-In
Bulb Holder - Push-In Ref: ZZAS612
Application: Series1, 2, 2A & 3 instrument illumination.
Description: Metal bulb holder for 15.9mm (5/8") hole. With separate earth connection. Takes capless bulb.

Price: 3.21 (3.85 Including VAT at 20%)



Bulb Holder - Push-In
Bulb Holder - Defender Instruments Ref: ZZAS614
Application: Series 3 warning lamps in speedometer head, Defender instrument illumination.
Description: Plastic push-in bulb holder with 2 contacts to suit 12.5mm (0.5") tube. Supplied with 504 capless bulb.

Price: 2.20 (2.64 Including VAT at 20%)



Bulb Holder - Defender Instruments
Front Side Lamp - Wipac Ref: RTC5012
Application: Series 3 and Defender to 1994.

Description: Wipac branded lamp with clear lens. No bulb included. Wires, one black and one red.

Approximate dimensions: Lens diameter 67.5mm(2.7"), cable length 91cm(3').

Price: 4.05 (4.86 Including VAT at 20%)



Front Side Lamp - Wipac
Front Indicator Lamp - Wipac Ref: RTC5013
Application: Series 3 and Defender to 1994.

Description: Wipac branded lamp with amber lens. No bulb included. Wires, one black and one green.

Approximate dimensions: Lens diameter 67.5mm(2.7"), cable length 91cm(3').

Price: 4.05 (4.86 Including VAT at 20%)



Front Indicator Lamp - Wipac
Stop/Tail Lamp - Wipac Ref: RTC5523
Application: Series 3 and Defender to 1994.

Description: Wipac branded lamp with red lens. No bulb included. Wires, one black, one red and one green.

Approximate dimensions: Lens diameter 67.5mm(2.7"), cable length 91cm(3').

Price: 4.95 (5.94 Including VAT at 20%)



Stop/Tail Lamp - Wipac
Rear Indicator Lamp - Wipac Ref: RTC5524
Application: Series 3 and Defender to 1994.

Description: L E Perei branded lamp with amber lens but no bulb. Wires - one black and one green.

Approximate dimensions: Lens diameter 67.5mm(2.7"), cable length 37cm(14.6").

Price: 3.75 (4.50 Including VAT at 20%)



Rear Indicator Lamp - Wipac
Number Plate Lamp Ref: XFC100550
Application: Series 2A, Series 3 and Defender.

Description: UK made rear number plate lamp. Supplied with 2 bulbs.

Approximate dimensions: Length 11cm(4.3"), depth 5cm(2"), width 4cm(1.6").

Price: 9.22 (11.06 Including VAT at 20%)



Number Plate Lamp
Rear Lamp Ref: 589446
Application: Series 2/2A and early Series 3

Description: Replacement rear lamp, red lens with clear window for number plate illumination. With reflector in centre.

Approximate dimensions: Overall diameter 78mm(3.1"), height 37mm(1.5")

Price: 4.50 (5.40 Including VAT at 20%)



Rear Lamp
Digital Dispensary > LAND Rover Series 2 & Series 3 Parts > Electrical Parts for Land Rover Series 2 and 3
Page:   <<   <  6  7  8  9  10  ...   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Outer Pinion Bearing

Outer Pinion Bearing

10.72

Application: Series 2 from suffix B chassis onwards, Series3 and Classic models where Rover type differentials are fitted.

Description: Timken taper roller bearing for outer end of differential pinion gear. Timken bearing numbers HM88046/HM88010

Approximate dimensions: Outside diameter 2.7"(68.5mm), inside diameter 1.25"(31.8mm)., height 0.93"(23.5mm).


find out more

Inner Pinion Bearing - Differential

Inner Pinion Bearing - Differential

21.70

Application: Series 2 from suffix B chassis onwards, Series3 and Classic models where Rover type differentials are fitted.

Description: Timken taper roller bearing for inner end of differential pinion gear. Timken bearing numbers HM801346X/HM801310

Approximate dimensions: Outside diameter 3.25"(82.5mm), inside diameter 1.5"(38mm)., height 1.22"(31mm).

find out more

Seal Kir for 1 1/8" Wheel Cylinders

Seal Kir for 1 1/8

23.26

Application: Series 1 models 1948 and 1949 for chassis numbers 860001 to 867720.

Descrition: Replacement seals for rear wheel cylinders with bore of 1 1/8"(28.5mm). Kit has sufficient seals for both front wheel cylinders.

find out more

Seal Kit for 1 3/8" Wheel Cylinders

Seal Kit for 1 3/8

23.26

Application: Series 1 models 1948 and 1949 for chassis numbers 860001 to 867720.

Descrition: Replacement seals for front wheel cyliders with bore of 1 3/8"(35mm). Kit has sufficient seals for both front wheel cylinders.


find out more

Outlet Nozzle - SU Fuel Pump

Outlet Nozzle - SU Fuel Pump

4.44

Application: Series 1 and early Series 2 models.

Description: Nozzle for outlet of SU fuel pumps. Allows push-on fuel hose connection to pump.

Approximate dimensions: Thread diameter 22mm(0.87"), nozzle diameter 7mm(0.28").

find out more

Wiper Arm Series 3 RH

Wiper Arm Series 3 RH

24.25

Application: Series3 models.

Description: Right hand wiper arm in stainless steel by Tex Classic.

Approximate dimensions: Overall length 24cm(9.5")

find out more

Wiper Arm Series3 LH

Wiper Arm Series3 LH

24.25

Application: Series3 models.

Description: Left hand wiper arm in stainless steel by Tex Classic.

Approximate dimensions: Overall length 24cm(9.5")

find out more

Door Mirror Left Hand

Door Mirror Left Hand

30.78

Application: Range Rover Classic of the mid 70s.

Description: Reproduction black mirror head by Tex with convex glass.

Approximate dimensions: Head 145mm(5.7") x 90mm(3.5"), mounting holes 38mm(1.5") centres.

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -