Digital Dispensary

Product Sections


Best Sellers

Rebuild kit for Solex 32PBI-2 Carburettor

Rebuild kit for Solex 32PBI-2 Carburettor

66.04

Application: Series 1 2.0litre engine 1952 to 1958 fitted with Solex 32PBI-2 carburettor. Zenith part number ZRK17.
Description: A fairly comprehensive kit of parts to rebuild this carburettor.


find out more

Screw for retaining Brake Drums

Screw for retaining Brake Drums

0.25

Application: Series 1, 2 & 3.
Description: Countersunk head screw 3/8"BSW by 5/8" long.
find out more

Acorn for HT Leads

Acorn for HT Leads

1.49

Application: Series One and Series Two. 1948 to 1961 approx.
Description: Acorn nut for retaining high tensions leads to distributor caps and plug caps. Use with 217279 brass washers and copper cored high tension cable.
Approximate dimensions: height 24mm(0.95"), overall diameter 15.4mm(0.6"), thread diameter 12.5mm(0.5")
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

12.58

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Seal Kit - front wheel cylinders

Seal Kit - front wheel cylinders

3.00

Application: Series 1, 2 & 3.
Description: Replacement seal kit for pair of 1.25" bore wheel cylinders. Contains 4 cup seals for pistons, 4 dust seals for cylinder ends and 2 dust caps for bleed screws. Suits cylinders 243296 and 243297.
find out more

Inner Wheel Hub Seal

Inner Wheel Hub Seal

4.28

Application: Series 1 front axles, Series 2 & Series 3 to 1980.
Description: Inner hub oil seal made by Corteco/Gaco.
Approximate dimensions: outside diameter 85mm (3.35"), thickness 7.8mm (0.3").
Original part number 239422.

find out more

Felt Seal Stub Shaft to Drive Flange

Felt Seal Stub Shaft to Drive Flange

0.48

Application: Series 1 front axles, Series 2 front and rear axles, Series 3 SWB front and rear axles.
Description: Felt seal for 10 spline axle shafts to outer drive flanges.
Original part number 272086
find out more

Felt Seal for Series 1 Pedals

Felt Seal for Series 1 Pedals

3.66

Application: Series 1 brake and clutch pedals.
Description: felt seal for brake and clutch pedals. Used with grommet 70620.
Approximate dimensions: 60mm (2.4") long, 44mm (1.7") wide, 15mm (0.6") deep.
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > LAND Rover Series 2 & Series 3 Parts > Electrical Parts for Land Rover Series 2 and 3
Page:  1  2  3  4  5  ...   >   >>
Copy of Ducellier Distributor Ref: ERC6986D
Application: All Series 2A and Series 3 four cylinder petrol engines. Also 90/110 2.25 petrol engines.
Description: Complete distributor which is a good copy of the Ducellier.

Price: 73.33 (88.00 Including VAT at 20%)



Copy of Ducellier Distributor
Genuine Lucas 45D4 Distributor Ref: ETC5835
Application: 4 cylinder petrol engines in Series2A, Series3 and Defender.

Description: New old stock genuine Lucas 4261B distributor.

Price: 48.00 (57.60 Including VAT at 20%)




People who bought this item also bought:
1. Service Kit for Lucas 45D Distributor (Ref: DISTSERVKIT02)
Genuine Lucas 45D4 Distributor
Service Kit for Lucas 25D Distributor Ref: DISTSERVKIT01
Application: Lucas 25D 4cylinder distributor as fitted to Series 2A and early Series 3 petrol engines.

Description: Kit containing cap - 566859= now Intermotor, rotor arm - RTC3612 in red by Distributor Doctor, contact breakers (points) - RTC3270 and condensor - RTC3472.

See below for specification of kit components.

Price: 11.50 (13.80 Including VAT at 20%)




People who bought this item also bought:
1. Spark Plug Champion N12YC (Ref: RTC3570)
2. Spring Bush for 2.5" wide Springs (Ref: 548205)
Service Kit for Lucas 25D Distributor
Service Kit for Lucas 45D Distributor Ref: DISTSERVKIT02
Application: Lucas 45D 4cylinder distributor as fitted to Series 3 petrol engines and some Defenders

Description: Kit containing genuine cap - RTC3278, red rotor arm - RTC3614R, Lucas contact breakers (points) - RTC6627 and genuine condensor - RTC6621.
See below for specification of kit components.

Price: 26.88 (32.26 Including VAT at 20%)




People who bought this item also bought:
1. Genuine Lucas 45D4 Distributor (Ref: ETC5835)
Service Kit for Lucas 45D Distributor
Service Kit for Ducellier Distributor Ref: DISTSERVKIT03
Application: Ducellier 4cylinder distributor as fitted to Series 2A and Series 3 petrol engines.
Description: Kit containing cap - RTC4932, rotor arm - RTC4933, contact breakers (points) - RTC6625 and condensor - RTC6620.
See below for specification of kit components.

Price: 8.50 (10.20 Including VAT at 20%)



Service Kit for Ducellier Distributor
Distributor Cap for Lucas 25D Ref: 600328
Application: Early Series2 and Series2A with Lucas 25D distributor.

Description: Reproduction distributor cap with 'acorn' nut type retainers for HT leads. Supplied with 5 acorn nuts.

Approximate dimensions: Overall diameter 77mm(3"), height 74mm(2.9").

Price: 9.74 (11.69 Including VAT at 20%)





Related products:
1. Split Brass Washer (Ref: 214279)
Distributor Cap for Lucas 25D
Distributor Cap for Lucas 25D Ref: 566859=
Application: Lucas 25D 4cylinder distributor as fitted to Series 2A and early Series 3 petrol engines.
Description: Intermotor boxed distributor cap with 'push in' HT leads.
Approximate dimensions: overall diameter 77mm (3.03 inches), height 74mm (2.91 inches)

Price: 3.68 (4.42 Including VAT at 20%)



Distributor Cap for Lucas 25D
Distributor Cap Lucas 45D Ref: RTC3278
Application: Lucas 45D 4cylinder distributor as fitted to Series 3 petrol engines.
Description: Genuine boxed distributor cap with 'push in' HT leads.
Approximate dimensions: overall diameter 73.5mm (2.9 inches), height 72mm (2.83 inches)

Price: 16.09 (19.31 Including VAT at 20%)



Distributor Cap Lucas 45D
Distributor Cap for Lucas 6cylinder Ref: 605544
Application: Lucas 25D/6cylinder distributor as fitted to late Series2A and Series 3 petrol engines.

Description: Replacement distributor cap with 'push in' HT leads.

Approximate dimensions: overall diameter 78mm (3.1 inches), height 79mm (3.11 inches)

Price: 8.50 (10.20 Including VAT at 20%)



Distributor Cap for Lucas 6cylinder
Distirbutor Cap 6cyl 45D Ref: RTC3813
Application: Series 3 6 cylinder with Lucas 45D distributor.

Description:Replacement distributor Cap.

Approximate dimensions: overall diameter 72.5mm(2.9"), height 72mm(2.8")

Price: 10.57 (12.68 Including VAT at 20%)



Distirbutor Cap 6cyl 45D
Digital Dispensary > LAND Rover Series 2 & Series 3 Parts > Electrical Parts for Land Rover Series 2 and 3
Page:  1  2  3  4  5  ...   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Piston Assembly 2.4TDCI

Piston Assembly 2.4TDCI

122.63

Application: Defender from 2007 to 2012 with 2.4 litre TDCI engine.

Description: Standard size piston for 89.90mm bore. Supplied with rings, gudgeon pin and circlips. Made by Nural a Federal Mogul company.



find out more

Electric Fuel Pump - Series 1

Electric Fuel Pump - Series 1

100.44

Application: Series 1 Land Rovers 1948 to 1958. Series 2 with 2 litre petrol engine.

Description: Authentic SU electric fuel pump to original pattern. For mounting in engine bay. Can be used on either positive or negative earth vehicles. NB Both outlet and inlet have threaded connectors.

Approximate dimensions: 14cm long, base diameter 73mm. Mounting holes in base are threaded M6

find out more

Repair Kit for Handbrake Adjuster

Repair Kit for Handbrake Adjuster

4.45

Application: Series 2A and Series 3.

Description: Old stock Lucas Girling repair kit for handbrake adjuster. Includes adjusting screw and wedges plus period tube of brake grease.


find out more

Injector for BMW M57 Diesel Engine

Injector for BMW M57 Diesel Engine

183.77

Application: Range Rover L322 with BMW M57 3.0litre diesel engine.

Description: Reconditioned Bosch injector for the M57 engine. Outright purchase, we do not need your old injector in vexchange.

Approximate dimensions: Overall length 22cm(8.7").

find out more

Bearing and Seals kit for Freelander 1 IRD

Bearing and Seals kit for Freelander 1 IRD

72.54

Application: Freelander 1 IRD unit except V6 model.

Description: Set of 7 OE spec bearings and 4 seals to overhaul the intermediate reduction drive unit. This kit does not include the plate for the oil cooler.

find out more

Rear Diff Repair Kit - Freelander2

Rear Diff Repair Kit - Freelander2

103.14

Application: Freelander 2 and Evoque

Description: Repair kit of OE bearings and seals for the rear differential. Kit includes 4x taper roller bearings, 3x oil seals, 2x 'O' rings, collapsible spacer and pinion nut.
find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -