Dingocroft Land Rover Series One Parts

Product Sections

Best Sellers

Spider Bypass Link Cable

£8.99

Application: Discovery 1 1995 to 1998 approx, where fitted with original immobilisation and alarm system.
Description: Small wiring harness to bypass the "spider" .
See http://forums.lr4x4.com/index.php?showtopic=86 for full instructions on how to fit.
find out more

Connector Kit for Defender Switches

£8.99

Application: Defender 2001 to 2006 with the facelift dash.
Description: Connector kit for auxillary switches on centre dash. This is a direct fit to the front fog lamp switch YUG000540LNF, but will fit the other switches if the splines are removed with a small sharp blade such as a modelling scalpel.
find out more

Connector Kit for Bulb Holders

£3.49

Application: Single pole bulb holders on Defender 1995 onwards, Discovery 1, Discovery 2, Range Rover Classic late,and Range Rover 38A 1995 to 2001.
Description: Connection kit for replacing plug that connects to single pole bulb holder XPB100180.
find out more

Nut and Bolt Kit for Propshafts

£1.54

Application: Series 1, Series 2, Series 2A, Series 3 Land Rovers. All Defenders, Classic Range Rover, Range Rover 2 (38A), Discovery 1 and Discovery 2.
Description: Set of four 3/8UNF x 1.125" long bolts plus four short nyloc nuts.
find out more

Replacement Jate Ring and Fixings

£18.60

Replacement Jate Ring with fixing bolt, nut and spacing washer. Standard equipment on military Defenders. Fixes to chassis rail at front or rear of vehicle. Uses existing mounting holes, so no drilling required.
Application: Defender, Classic Range Rover and Discovery 1.

find out more

Socket for hub nuts

£34.20

Application: Series 1 - 3, Range Rover Classic, Discovery 1 and Defender.
Description: 52mm deep socket, 1/2" drive for hub locking nuts.

find out more

Rebuild kit for Solex 32PBI-2 Carburettor

£40.98

Application: Series 1 2.0litre engine 1952 to 1958 fitted with Solex 32PBI-2 carburettor. Zenith part number ZRK17.
Description: A fairly comprehensive kit of parts to rebuild this carburettor.

Sorry, temporarily unavailable until a material is found for pump diaphragm that is compatable with ethanol.
find out more

Standard Set Plus for Defender, Classic Range Rover and Discovery

£162.11

Standard Set Plus of Polybush covers both ends of front radius arms, both ends of rear lower link, Panhard rod bushes, plus rear 'A' frame to chassis.
Application: Defender 1994 to 2001, Classic Range Rover 1986 to 1995, Discovery I 1989 to 1999.
Available in Classic and Comfort Formulas.
find out more

Hub Bearing Kit - Defender, Discovery and Classic Range Rover

£23.94

Application: Defender rear from approx 1985 to 1993, Discovery 1 to 'JA' chassis number (1992) front and rear, Range Rover Classic 1985 to 1995 non-ABS front and rear.
Description: Kit of parts to service one wheel hub. Kit comprises a pair of Timken wheel bearings, Gaco inner seal, replacement outer seal, seal spacer, 2x flange gaskets and hub nut locker.
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > Land Rover Series One Parts

Land Rover Series One Books and Publications
Books and other publications relating to Series one 1948 to 1958.

Land Rover Series One Engine Parts
A range of Series One engine parts from 1948 to 1958. This covers those parts that we sell regularly and/or that we have good stock of.
Other parts are available on a quotation basis only as supply is now difficult or almost impossible on many items.

Land Rover Series One Fuel System
A range of Series One fuel system parts from 1948 to 1958. This covers those parts that we sell regularly and/or that we have good stock of.
Other parts are available on a quotation basis only as supply is now difficult or almost impossible on many items.

Land Rover Series One Ignition and Engine Electrics
Ignition parts and engine electrical parts for Series One 1948 to 1958.
Unfortunately only a few items are readily available. If you do not see what you want, contact us and we may be able to find it for you.

Land Rover Series One Gearbox Parts
Series 1 gearbox parts for 1948 to 1958. This list covers those items that we sell regularly and/or have good stock of.
Other items may be obtainable, but please contact us for a quotation.

Land Rover Series One Axles and Transmission Parts
Series One 1948 to 1958 axle and transmission parts. Parts listed are those that we sell regularly and/or have large stocks of.
We may be able to supply other parts as well, please contact us and we will do our best.

Land Rover Series One Steering Parts
Series One 1948 to 1958 steering system parts. Parts listed are those that we sell regularly and/or have large stocks of.
We may be able to supply other parts as well, please contact us and we will do our best.

Land Rover Series One Brake Parts
Series One 1948 to 1958 braking system parts. Parts listed are those that we sell regularly and/or have large stocks of.
We may be able to supply other parts as well, please contact us and we will do our best.

Land Rover Series One Electrical Parts
Series One 1948 to 1958 electrical items. Sorry, a fairly small section as many electrical parts are now hard to obtain.
If what you want is not shown, by all means email us and we may be able to trace it.

Land Rover Series One Suspension Parts
This section lists those suspension parts that we either have lots of stock of, or can easily obtain. Other parts may well be available in small quantities or from our searching for them. If you do not see what you want, please do ask and we will try to find for you.

Land Rover Series One Cooling Parts
Cooling system parts for Series 1, 1948 to 1958. This section covers those items that we can easily source and price. If you need something else, please email us and we will try and find it for you.

Digital Dispensary > Land Rover Series One Parts

Haven't found what you want? Then try our quotation service.

Main Pages

New Products

The Land Rover Experience by Tom Sheppard

£15.95

We have limited stock of "New - Old Stock" of this book published in 1993 by Land Rover.
Sub-titled "A user's guide to four-wheel driving", the aim of this book is to make the operation of all Land Rover products, both on and off road, more effective, easier and safer. It is aimed at all users - from seasoned fleet operators in remote areas to the person driving their first four-wheel drive vehicle.
The book is split into 7 sections and each section is subdivided into several chapters. Section titles are; Sec1: 4x4 Ingredients, Sec2: Enhanced Traction, Sec3: Ops - Preliminaries, Sec4: Ops - The Details, Sec5: Ops - Recovery, Sec6: Advanced Driving, Sec7: Data.
Hard back book with dust cover measuring 25.4cm(10") high by 20cm(7.9") wide. 164 pages with many photos and diagrams.
find out more

Air Bleed Hose Assembly

£14.88

Application: Freelander One with petrol (gasolene) engines.
Description: Genuine air bleed hose and 'tee' peice assembly. Allows air from top of radiator to escape to expansion bottle.
Approximate dimensions: Overall length 44cm(17.3"), inside diameter 20mm(0.8")
find out more

Intercooler Hose TD4

£24.95

Application: Freelander One with M47 (TD4) diesel engine.
Description: Genuine Hose from intercooler to inlet manifold.
Approximate dimensions: Overall length 44.5cm(17.5"), inside diameter 4.7cm(1.85")
find out more

Water Outlet

£17.47

Application: Series 1 1.6ltr & 2.0ltr petrol engines.
Description: Water outlet on top of engine over thermostat.
find out more

Rear Brake Shoes - Axle Set

£13.26

Application: Freelander One to 'YA'.
Description: Replacement set of four brake shoes for rear of Freelander One to approximately 2000.
Approximate dimensions: Each shoe measures 23cm(9.1") edge to edge and is 3.7cm(1.5") wide.
find out more

Rear Brake Shoes - Axle Set

£58.33

Application: Freelander One to 'YA'.
Description: Genuine set of four brake shoes for rear of Freelander One to approximately 2000.
Approximate dimensions: Each shoe measures 23cm(9.1") edge to edge and is 3.7cm(1.5") wide.
find out more

Set of Return Springs for Rear Brake Shoes

£10.75

Application: Freelander One from '1A'.
Description: Genuine set of return springs (pull-off springs) for rear brakes from approx 2001 onwards. Kit is for both rear wheels.
Approximate dimensions: 2 springs 12.3cm(4.8") long, 2 springs 7.2cm(2.8") long, 1 spring 13cm(5.1") long and 2 springs 4.5cm(1.8").

find out more

Rear Brake Cylinder

£9.42

Application: Freelander One from '1A' onwards.
Description: Original Equipment rear wheel cylinder for vehicles from 2001 approximately. These cylinders are not handed.
Approximate dimensions: Casting length 6cm(2.4")
find out more

Pin & Clip Set for Rear Brake Shoes

£4.54

Application: Freelander One.
Description: Genuine set of pins and clips for retaining rear brake shoes to backplates.
Approximate dimensions: Pins are 28mm(1.1") long.
find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England) email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -

SearchQuest: Internet Marketing, SEO