Digital Dispensary

Product Sections


Best Sellers

'O' Ring for Thermostat

'O' Ring for Thermostat

0.55

Application: Series 1, 2 & 3 4cylinder engines.
Description: 'O' ring for sealing thermostat to cylinder head.
Approximate dimensions: outside diameter 55mm (2.2").
Original part number 01645
find out more

Sealing Ring Water Pump to Cylinder Head

Sealing Ring Water Pump to Cylinder Head

2.18

Application: Series 1 1.6ltr & 2.0Ltr and Series 2A/3 2.6ltr petrol engines.
Description: Thick rubber sealing ring between water pump and cylinder head.
Approximate dimensions: internal diameter 13mm (1/2"), outside diameter 24mm (0.95"), thickness 5.3mm (0.2")
find out more

Thermostat 82 degrees

Thermostat 82 degrees

10.61

Application: Series 1 1.6ltr & 2.0ltr petrol engines, Defender 2.5 & 2.5TD diesel engines.

Description: Waxstat 82degree thermostat.

Original part number: 504560.

find out more

Gasket Exhaust Manifold to Down Pipe

Gasket Exhaust Manifold to Down Pipe

0.96

Application: Series 1, 2 & 3 four cylinder engines.
Description: Square flange gasket for exhaust. Used on various exhaust manifolds and on some pipe to pipe exhaust joints.
find out more

Grommet Series 1 Pedals

Grommet Series 1 Pedals

10.80

Application: Series 1 brake and clutch pedals.
Description: Reproduction rubber grommet for brake pedal shaft to floor panel. Use with 70621 felt seal.
find out more

Oil Seal Set for Gearbox

Oil Seal Set for Gearbox

12.58

Application: Series 1, 2 & 3 with 4 or 6 cylinder engine.
Description: Set of oil seals and 'O' rings for main and transfer gearboxes. Includes seals for selector shafts.
find out more

Felt Seal for Series 1 Pedals

Felt Seal for Series 1 Pedals

3.66

Application: Series 1 brake and clutch pedals.
Description: felt seal for brake and clutch pedals. Used with grommet 70620.
Approximate dimensions: 60mm (2.4") long, 44mm (1.7") wide, 15mm (0.6") deep.
find out more

Brass Nut 5/16"BSF

Brass Nut 5/16

1.66

Application: Series1 exhaust manifold.

Description: Brass nut 5/16"BSF for holding downpipe to exhaust manifold.

Approximate dimensions: 3/8"(9.5mm) high, 17/32"(13.5mm) across flats.

find out more

Fixings Kit for Water Pump

Fixings Kit for Water Pump

19.87

Application: Series One, 1948 to 1958.

Description: Set of fixings for water pump comprising the following parts;
6x 250517 bolt 1/4"BSF x 1.5", 1x 250518 bolt 1/4"BSF x 1.75", 1x 237150 bolt 1/4"BSF x 2.25", 2x set screw 5/16"BSW x 11/16" plus 8x 1/4" lock washers and 2x 5/16" lock washers.
find out more

These Superb Prices are ONLY available when you order ON-LINE

Digital Dispensary > LAND Rover Series 2 & Series 3 Parts > Electrical Parts for Land Rover Series 2 and 3
Page:   <<   <  6  7  8  9  10  ...   >   >>
Lens - Indicator Lamp Ref: STC319
Application: Series 2 and Series 3.

Description: Indicator lamp lens.

Approximate dimensions: Overall diameter 70mm(2.75"), height 36mm(1.4").

Original part number: 542048

Price: 2.50 (3.00 Including VAT at 20%)



Lens - Indicator Lamp
Lens Sidelamp Ref: 589284D
Application: Series 3 and Defender to 1994.

Description: Clear lens for sidelamp - non genuine.

Approximate dimensions: Diameter 68mm(2.7"), height 38.5mm(1.5").

Price: 1.50 (1.80 Including VAT at 20%)



Lens Sidelamp
Lens Indicator Ref: 589285
Application: Series 3 and Defender to 1994.

Description: Amber lens for sidelamp.

Approximate dimensions: Diameter 68mm(2.7"), height 38.5mm(1.5").

Price: 2.82 (3.38 Including VAT at 20%)





Related products:
1. Screw Kit for Lamp Lens (Ref: 608004)
Lens Indicator
Lens Stop/Tail Ref: 532880
Application: Series 2A and Series3.

Description: Lens for stop/tail laml with reflector in centre and window in bottom for number plate illumination.

Approximate dimensions: Overall diameter 89mm(3.5"), height 52mm(2")

Price: 6.50 (7.80 Including VAT at 20%)



Lens Stop/Tail
Lens Stop/tail Lamp Ref: RTC210
Application: Series 3 and Defender to 1994.

Description: Red lens for sidelamp.

Approximate dimensions: Diameter 68mm(2.7"), height 38.5mm(1.5").

Price: 1.50 (1.80 Including VAT at 20%)





Related products:
1. Screw Kit for Lamp Lens (Ref: 608004)
Lens Stop/tail Lamp
Lens Stop/Tail Lamp Ref: 90514152
Application: Series 2A and early Series 3.

Description: All red (no window for number plate illumination) lens with built in reflector.

Approximate dimensions: Overall diameter 79mm(3.1"), height 39mm(1.5").

Price: 4.96 (5.95 Including VAT at 20%)



Lens Stop/Tail Lamp
Screw Kit for Lamp Lens Ref: 608004
Application: Series 3 and Defender to 1994.

Description: Pair of fixing screws for plastic bodied lamps. Supplied with 2 rubber washers and 2 fibre washers.

Approximate dimensions: Overall length 18.5mm(0.73").

Price: 0.21 (0.25 Including VAT at 20%)



Screw Kit for Lamp Lens
Voltage Regulator Ref: 235553
Application: Series 1 petrol models, also early Series 2/2A petrol models to chassis suffix 'C'.
Description: Reproduction of Lucas 37182 voltage regulator.
Approximate dimensions: Base 85mm(3.3") by 80mm(3.1"), 90mm(3.5") high.

Price: 36.50 (43.80 Including VAT at 20%)




People who bought this item also bought:
1. Washer Shock Absorber Bush (Ref: RYF500160)
2. Sealing Ring Water Pump to Cylinder Head (Ref: RTC1975)
3. Split Pin - Shocker Retention (Ref: 4063A)
Voltage Regulator
Voltage Regulator Ref: RTC3862
Application: Series 2A suffix 'D' onwards with petrol engines (negative earth models).

Description: Reproduction voltage regulator with spade connections.

Previous part numbers: 514734 GEU603 Geu6603 RTC435 Lucas 37290

Price: 26.95 (32.34 Including VAT at 20%)



Voltage Regulator
Reproduction Fusebox for Series 2/2A Vehicles Ref: 606253D
Application: All Series 2 and 2A models.
Description: Reproduction fusebox to take 2 fuses with blade connectors. Supplied with cover.

Price: 9.25 (11.10 Including VAT at 20%)



Reproduction Fusebox for Series 2/2A Vehicles
Digital Dispensary > LAND Rover Series 2 & Series 3 Parts > Electrical Parts for Land Rover Series 2 and 3
Page:   <<   <  6  7  8  9  10  ...   >   >>

Haven't found what you want? Then try our quotation service.

Main Pages


New Products

Locking Hasp for Fuel Cap

Locking Hasp for Fuel Cap

4.50

Application: Series 2a and Series 3.

Description: Locking hasp for fuel cap with 'ears'. Allows use of padlock to secure fuel cap.

Approximate dimensions: Mounting screw centres 70mm(2.75")

Old part number: GLR361

find out more

Bail Assembly

Bail Assembly

2.70

Application: Series 2A and Series 3.

Description: Retainer for glass bowl on side of lift pump on 4 cylinder models.

Approximate dimensions: Overall length 92mm, width 58mm.

find out more

Fuel Filler Cap

Fuel Filler Cap

26.46

Application: Series 2a and Series 3.

Description: Old stock Unipart 2 lug fuel filler cap. Supplied with seal,

Approximate dimensions: Overa;; diameter 96mm(3.8").

find out more

6 Way Lighting Switch - Military

6 Way Lighting Switch - Military

153.60

Application: Series3, Light Weight, 101 and Defender military models.

Description: Old stock Lucas 34259 six way lighting swith with facility for lock barrel (not supplied).


find out more

Bypass Hose Series 1 1948-1953

Bypass Hose Series 1 1948-1953

8.70

Application: Series 1 1948 to 1953 with 1.6 litre and early 2 litre engines.

Description: Reproduction bypass hose.

Approximate dimensions: Overall length 88mm(3.5"), outside diameter 45mm(1.8"), inside diameter 34mm(1.3")

find out more

Engine Breather-Filter

Engine Breather-Filter

22.69

Application: Defender with 2.5litre naturally aspirated diesel engine.

Description: Breather cap on top of rocker cover with single pipe outlet of 19mm diameter.

find out more

Installer Oil Seal

Installer Oil Seal

131.21

Application: Freelander2 and Evoque.

Description: Installer for oil seal. Beleived to be on front differential.

Approximate dimensions: Overall length 19.4cm(7.6"), overall diameter 90mm(3.5")

find out more

Remover Pinion Oilseal

Remover Pinion Oilseal

140.81

Application: Freelander 2 and Evoque.

Description: Remover for pinion oilseal. Use with slide hammer LRT-99-004.

Approximate dimensions: Overall length 14cm(5.5")

find out more

Dingocroft, High Street, Downley, High Wycombe, Bucks. HP13 5XJ. Great Britain

Tel: 01494 448367 Fax: 01494 459964 Company registration number 1163210 (England)
email: sales@dingocroft.co.uk

Copyright © 1997 Penn Rental Service Limited trading as Dingocroft . Suppliers of Land Rover Parts, Land Rover spares and Land Rover accessories. Land Rover Defender parts, Land Rover Freelander parts. Range Rover parts. Range Rover Classic parts. Land Rover Discovery parts. Parts for Land Rover. Parts for Landrover. Land Rover parts UK. E&O -